Academic Journals Database
Disseminating quality controlled scientific knowledge

Comparison of two innovative precipitation systems for ZnO and Al-doped ZnO nanoparticle synthesis

ADD TO MY LIST
 
Author(s): Anne Aimable | Tomasz Strachowski | Ewelina Wolska | Witold Lojkowski | Paul Bowen

Journal: Processing and Application of Ceramics
ISSN 1820-6131

Volume: 4;
Issue: 3;
Start page: 107;
Date: 2010;
VIEW PDF   PDF DOWNLOAD PDF   Download PDF Original page

Keywords: ZnO | Precipitation | Particle size distribution | Photoluminescence

ABSTRACT
This study presents a comparative approach to investigate the potentials of two innovative methods for the synthesis of ZnO and Al-doped ZnO. The first method is a precipitation system working in mild hydrothermal conditions (90°C) using a tubular reactor (Segmented Flow Tubular Reactor, SFTR). The second method is a microwave-assisted hydrothermal process working at 250°C - 38 atmospheres. Nanocrystalline ZnO with a high specific surface area (49–68 m2/g) was obtained with both systems. Smaller equiaxed particles (50–70 nm) were obtained with the SFTR, with an excellent homogeneity in size and morphology, which was attributed to an excellent control of the process parameters (mixing, temperature, volume of reaction). A higher luminescence signal was measured on these samples. The microwave method leads to particles with a higher crystallinity due to the temperature of the reaction. A significant effect of the aluminum was observed, which reduces the crystal growth to produce equiaxed morphologies. This effect was enhanced by adding poly(acrylic) acid (PAA).
Affiliate Program      Why do you need a reservation system?