Academic Journals Database
Disseminating quality controlled scientific knowledge

Determinación de la exactitud de una superficie digital del terreno con el uso de perfiles

ADD TO MY LIST
 
Author(s): Edilberto Niño Niño

Journal: Tecnura
ISSN 0123-921X

Volume: 14;
Issue: 27;
Start page: 69;
Date: 2010;
VIEW PDF   PDF DOWNLOAD PDF   Download PDF Original page

Keywords: Accuracy | Profile | Reference | Digital Terrain Surface

ABSTRACT
The accuracy of a digital terrain surface (SDT) is difficult to determine efficiently. In most cases, this procedure is performed based on control points obtained by GPS technology at a high cost, andwhat you get is a very general estimate. This, since this procedure allows for the accuracy of digital terrain surface only locally or about each control point and must assume homogeneous behavior of the heights across the surface. However, this is not always true.The method that arises is based on the use of profiles extracted from the surface. This method is possible to calculate the relative accuracy of digital terrain surface, on an area of greater accuracy. To make the process using two digital terrain surfaces, this hasbeen taken as reference. Are plotted as number of profiles in each surface, with the same coordinates and performs a statistical comparison to determine the differences of the examined surface heights compared to the one taken as reference.

Tango Rapperswil
Tango Rapperswil

     Affiliate Program