Academic Journals Database
Disseminating quality controlled scientific knowledge

EFFECT OF CASTING MOULD ON MECHANICAL PROPERTIES OF 6063 ALUMINUM ALLOY

ADD TO MY LIST
 
Author(s): WASIU AJIBOLA AYOOLA | SAMSON OLUROPO ADEOSUN | OLUJIDE SAMUEL SANNI | AKINLABI OYETUNJI

Journal: Journal of Engineering Science and Technology
ISSN 1823-4690

Volume: 7;
Issue: 1;
Start page: 89;
Date: 2012;
VIEW PDF   PDF DOWNLOAD PDF   Download PDF Original page

Keywords: Aluminum | Mould | Tensile strength hardness | Casting

ABSTRACT
Modern production methods for casting articles include the use of sand- mould, metal-mould, die, and centrifugal castings. Castings produced using sand mould is known to have peculiar microstructures depending on average size, distribution and shape of the moulding sand grains and the chemical composition of the alloy. These affect the surface finish, permeability and refractoriness of all the castings. In this paper, the effect of using CO2 process, metal mould, cement-bonded sand mould and naturally-bonded sand mould on the hardness, tensile and impact strengths of as-cast 6063 Aluminum alloy is presented. The results show that there is significant increase in hardness(33.7 HB) of the alloy when naturally-bonded sand mould is used for its production over that of metal, CO2 and cement moulds. The stress-strain curves behaviour of the samples also indicated that sample from naturally bonded sand has highest tensile strength with superior ductility. The alloy shows highest impact strength when metal mould is used for sample preparation in comparison with other moulds.
Save time & money - Smart Internet Solutions      Why do you need a reservation system?