Academic Journals Database
Disseminating quality controlled scientific knowledge

Evaluation of Iron and Manganese-Coated Pumice Application for the Removal of as(v) from Aqueous Solutions

ADD TO MY LIST
 
Author(s): Leila Babaie Far | Bubak Souri | Masoumeh Heidari | Roshan Khoshnavazi

Journal: Iranian Journal of Environmental Health Science & Engineering
ISSN 1735-1979

Volume: 9;
Issue: December;
Start page: 1;
Date: 2012;
VIEW PDF   PDF DOWNLOAD PDF   Download PDF Original page

Keywords: Arsenate | Iron-coated pumice | Manganese-coated pumice | Kinetics

ABSTRACT
Arsenic contamination of water has been recognized as a serious environmental issue and there are reports on its epidemiological problems to human health. The objective of this study was to evaluate the performances of iron-coated pumice and manganese-coated pumice as the adsorbents for removing arsenate from aqueous solutions. The effect of various parameters such as adsorbent dose, contact time, pH and initial concentration on removal efficiency of arsenate were evaluated in batch mode. The data obtained from the kinetic studies were analyzed using kinetic models of pseudo-first-order and pseudo-second-order. In addition, two isotherm models of Freundlich and Langmuir were used to fit the experimental data. The results showed that the optimum dosage of iron-coated pumice and manganese-coated pumice for arsenate removal were 40 and 80 g/L whereas the adsorption process reached equilibrium after 80 and 100 min, respectively. The maximum removal efficiency of arsenate using the two adsorbents were both recorded in pH=3 as the removal efficiency gradually declinedfollowing every increase in pH values of the solution. Iron-coated pumice also showed to have high removal efficiency when the initial concentration of arsenate was high while the low concentration of arsenate was efficiently removed by manganese-coated pumice. Moreover, it was depicted that the adsorption kinetics by bothadsorbents followed pseudo-second order equation and the uptake data of arsenate were well fitted with Langmuir isotherm model. Therefore, it could be concluded that iron and manganese-coated pumice could beconsidered as suitable adsorbents for arsenate removal from aqueous solutions.

Tango Jona
Tangokurs Rapperswil-Jona

     Affiliate Program