Academic Journals Database
Disseminating quality controlled scientific knowledge

Evaluation of Performance and Emission characteristics of Turbocharged Diesel Engine with Mullite as Thermal Barrier Coating

ADD TO MY LIST
 
Author(s): P. N. Shrirao | A. N. Pawar

Journal: International Journal of Engineering and Technology
ISSN 0975-4024

Volume: 3;
Issue: 3;
Start page: 256;
Date: 2011;
VIEW PDF   PDF DOWNLOAD PDF   Download PDF Original page

Keywords: Energy balance | Emissions | Mullite | Turbocharger | LHR | SE.

ABSTRACT
Tests were performed on a single cylinder, four stroke, direct injection, diesel engine whose piston crown, cylinder head and valves were coated with a 0.5 mm thickness of 3Al2O3 .2SiO2 (mullite) (Al2O3= 60%, SiO2= 40%) over a 150 μm thickness of NiCrAlY bond coat. Tests were carried out on standard engine (uncoated) and low heatrejection (LHR) engine with and without turbocharger. This paper is intended to emphasis on energy balance and emission characteristic for standard engine (uncoated) and low heat rejection (LHR) engine with and without turbocharger. Tests were carried out at different engine load and engine speed conditions for standard and low heatrejection engine with and without turbocharger. The results showed that there was 2.18% decreasing on specific fuel consumption value of low heat rejection (LHR) engine with turbocharger compared to standard engine at full load. There was as much as 12% increasing on exhaust gas temperature of LHR engine with turbocharger compared tostandard engine at full load. There was as much as 20.64% increasing on NOx emission of exhaust gas, 22.05% decreasing on CO emission of exhaust gas and 28.20% decreasing on HC emission of exhaust gas of LHR engine with turbocharger compared to standard engine at full load.
Why do you need a reservation system?      Affiliate Program