Academic Journals Database
Disseminating quality controlled scientific knowledge

EXPERIMENTAL INVESTIGATION ON HIGH PERFORMANCE CONCRETE USING SILICAFUME AND FLYASH

ADD TO MY LIST
 
Author(s): Kannan Kannan

Journal: Journal of Current Engineering Research
ISSN 2250-2637

Volume: 2;
Issue: 3;
Date: 2012;
Original page

Keywords: High performance concrete | silica fume | fly ash | superplasticizer | compressive strength | split tensile strength | flexural strength

ABSTRACT
The purpose of this experimental investigation is to study the behaviour of High Performance Concrete (HPC). In this investigation HPC was manufactured by usual ingredients such as cement, fine aggregate, coarse aggregate, water and mineral admixtures such as Silica Fume (SF) and Fly ash at various replacement levels and with Super Plasticizer. The water binder ratio (w/b) adopted is 0.30. The concrete used in this investigation was proportioned to target a mean strength of 60 MPa. Specimens such as cubes, cylinders and prism beams were cast and tested for various mixes viz. Seven mixes M1 to M7 are cast with 0%, 5%, 7.5% and 10% replacement of SF and another set of specimens with 0%, 5%, 7.5% and 10% replacement of SF along with 10% constant replacement of Fly ash to study the mechanical properties such as compressive strength, split tensile strength and flexural strength at different ages of concrete such as 3, 7, 28, 56 and 90 days. The result shows that the optimum replacement of silica fume is 7.5%. Totally The specimens were tested in 1000 kN loading frame at 28 days. The results were tabulated.
Why do you need a reservation system?      Affiliate Program