Academic Journals Database
Disseminating quality controlled scientific knowledge

Fuel Pellets Production from Biodiesel Waste

Author(s): Kawalin Chaiyaomporn

Journal: EnvironmentAsia
ISSN 1906-1714

Volume: 3;
Issue: 1;
Start page: 103;
Date: 2010;
VIEW PDF   PDF DOWNLOAD PDF   Download PDF Original page

Keywords: Fuel Pellets | Biodiesel Waste

This research palm fiber and palm shell were used as raw materials to produce pelletised fuel, and waste glycerol were used as adhesive to reduce biodiesel production waste. The aim of this research is to find optimum ratio of raw material (ratio of palm fiber and palm shell), raw material size distribution, adhesive temperature, and ratio of ingredients (ratio of raw material, waste glycerol, and water). The optimum ratio of pelletized fuel made only by palm fiber was 50:10:40; palm fiber, water, and waste glycerol respectively. In the best practice condition; particle size was smaller than 2 mm, adhesive glycerol was heated. From the explained optimum ratio and ingredient, pelletizing ratio was 62.6%, specific density was 982.2 kg/m3, heating value was 22.5 MJ/kg, moisture content was 5.9194%, volatile matter was 88.2573%, fix carbon content was 1.5894%, and ash content was 4.2339% which was higher than the standard. Mixing palm shell into palm fiber raw material reduced ash content of the pellets. The optimum raw material ratio, which minimizes ash content, was 80 to 20 palm fiber and palm shell respectively. Adding palm shell reduced ash content to be 2.5247% which was higher than pelletized fuel standard but followed cubed fuel standard. At this raw material ratio, pelletizing ratio was 70.5%, specific density was 774.8 kg/m3, heating value was 19.71 MJ/kg, moisture content was 9.8137%, volatile matter was 86.2259%, fix carbon content was 1.4356%, and compressive force was 4.83 N. Pelletized fuel cost at optimum condition was 1.14 baht/kg.
Affiliate Program      Why do you need a reservation system?