Academic Journals Database
Disseminating quality controlled scientific knowledge

KESAN PARAMETER PEMOTONGAN KE ATAS PEMBENTUKAN SERPIHAN PERKAKAS KELULI H13 MENGGUNAKAN MATA ALAT BERSALUT KARBIDA

ADD TO MY LIST
 
Author(s): Jaharah A. Ghani | Sim See Yong

Journal: Journal of Physical Science
ISSN 1675-3402

Volume: 17;
Issue: 2;
Start page: 67;
Date: 2006;
VIEW PDF   PDF DOWNLOAD PDF   Download PDF Original page

Keywords: high cutting speed | saw-tooth chip | H13 tool steel | coated carbide tool

ABSTRACT
This paper describes the effect of machining parameters at high cutting speed applications on chip formation of H13 tool steel using coated carbide tool. The machining parameters investigated are cutting speed (Vc): 224–355 m/min, feed rate (f): 0. –0.25 mm/tooth, and radial depth of cut: 0.3–0.8 mm. Axial depth of cut was kept constant at 3 mm. The effect of machining parameters on chip formation was studied in detailed using scanning electron microscope (SEM). It was observed that continuous chip with saw-tooth edge was formed at high feed rate and depth of cut. Energy Dispersive X-ray (EDX) analysis showed that the oxidation occurred due to the heat generation during the cutting process, especially at high feed rate and cutting speed.
Save time & money - Smart Internet Solutions      Why do you need a reservation system?