Academic Journals Database
Disseminating quality controlled scientific knowledge

Modeling Tractive Force Requirements of Wheel Tractors for Disc Ridging in Loamy Sand Soil

Author(s): S O Nkakini | I. Fubara-Manuel

Journal: International Journal of Engineering and Technology
ISSN 2049-3444

Volume: 2;
Issue: 10;
Start page: 1657;
Date: 2012;
VIEW PDF   PDF DOWNLOAD PDF   Download PDF Original page

Keywords: Tractive force | disc ridging | loamy | sand | soil | modelling | soil moisture

The efficiency with which a soil can transmit energy from a traction device on a tractor to the drawbar has been called the tractive efficiency of soil. Experiments were conducted for disc ridging operations in a loamy sand soil, at tillage speeds of 1.94m/s, 2.22m/s and 2.5m/s, using trace tractor techniques. Tractive force models at different tillage speeds were developed using dimensional analysis, describing the tractors tyre - soil interaction. The measured independent variables such as drawbar pull force, rolling (motion) resistance, wheel slip, moisture content, cone index, wheel numeric, contact pressure, speed, width of ridge and height of ridge were used in the developed models. Values of the measured dependent variable (Tractive force) were compared with computed values. High coefficients of determination R2 = 0.996, 0.996 and 0.986, percentage (%) errors of -0.122620038 and 0.11606597,-0.126307491 and 0.215127604 ,-0.603425382 and 0.372951166 at minimum and maximum values, for disc ridging at tillage speeds of 1.94m/s, 2.22m/s and 2.5m/s were obtained respectively. Analysis of variance between measured and predicted tractive force values indicated standard errors of 11.15346, 10.15346 and 8.24219, while correlation coefficients of R2 = 0.996, 0.768 and 0.9674 were obtained for disc ridging at tillage speeds of 1.94m/s, 2.22m/s, and 2.5m/s respectively . These results are clear evidence of the test of goodness of fit of the models between the measured and predicted tractive forces for disc ridging at the various tillage speeds. Disc ridging speed of 2.5m/s illustrated the lowest coefficient of determination R2 = 0.986. The developed models were validated by comparing the predicted with the measured tractive forces, and shown to closely followed the experimental results.
Affiliate Program     

Tango Jona
Tangokurs Rapperswil-Jona