Academic Journals Database
Disseminating quality controlled scientific knowledge

The optimization of retarding regimes within the particular group of cuts

ADD TO MY LIST
 
Author(s): V.I.Bobrovskiy | A.S.Dorosh

Journal: Science and Transport Progress
ISSN 2307-3489

Issue: 1 (43);
Start page: 103;
Date: 2013;
Original page

Keywords: hump | cut | retarding regime | interval | retarder

ABSTRACT
Purpose. The purpose is the improvement of the method of choosing the retarding regimes of cut rolling within the particular group in order to increase the quality of interval speed control of cuts at the automated hump. Methodology. Simulation method was used for research the trains’ breaking up process at the hump. Findings. The separation conditions of cuts within the particular group and their relation between the retarding regimes of cut control based on a system approach were studied. Interval between cuts within the particular group at the switches and retarders were considered simultaneously. The features of interval controlling at the classification humps with different mutual alignment of the first switch and master retarder were stressed. Originality. The researches found out that during optimization of the retarding regimes of cuts within the particular group one should provide the best conditions of cuts separation at the switches and retarders. Practical value. The problem of choosing the retarding regimes of cuts within the particular group is optimized formally. This retarding regime allows maximizing the minimum value of interval between cuts within the group.
Affiliate Program      Why do you need a reservation system?