Academic Journals Database
Disseminating quality controlled scientific knowledge

Performance evaluation of full scale UASB reactor in treating stillage wastewater

ADD TO MY LIST
 
Author(s): A.Mirsepasi , H. R. Honary , A. R. Mesdaghinia, A. H. Mahvi , H. Vahid , H. Karyab

Journal: Iranian Journal of Environmental Health Science & Engineering
ISSN 1735-1979

Volume: 3;
Issue: 2;
Start page: 79;
Date: 2006;
VIEW PDF   PDF DOWNLOAD PDF   Download PDF Original page

Keywords: UASB reactor | stillage | wastewater treatment plants

ABSTRACT
Upflow anaerobic sludge blanket (UASB) reactors have been widely used for treatment of industrial wastewater. In this study two full-scale UASB reactors were investigated. Volume of each reactor was 420 m3. Conventional parameters such as pH, temperature and efficiency of COD, BOD, TOC removal in each reactor were investigated. Also several initial parameters in designing and operating of UASB reactors, such as upflow velocity, organic loading rate (OLR) and hydraulic retention time were investigated. After modifying in operation conditions in UASB-2 reactor, average COD removal efficiency at OLR of 10–11 kg COD / m3 day was 55 percent. In order to prevent solids from settling, upflow velocity was increased to 0.35 m/h. Also to prevent solids from settling, the hydraulic retention time of wastewater in UASB-2 reactor was increased from 200 to 20 hours. This was expected that with good operation of UASB-2 reactor and with expanding of granules in the bed of the reactor, COD removal efficiency will be increased to more than 80 percent. But, because of deficiency on granulation and operation in UASB-2 reactor, this was not achieved. COD removal efficiency in the UASB-1 reactor was little. To enhance COD efficiency of UASB-1 reactor, several parameters were needed to be changed. These changes included enhancing of OLRs and upflow velocity, decreasing hydraulic retention time and operating with new sludge.
Affiliate Program     

Tango Jona
Tangokurs Rapperswil-Jona