Effect of binder molecular weight on morphology of TiO2 films prepared by tape casting and their photovoltaic performance

Author(s): Tasić N. | Branković Z. | Marinković-Stanojević Z. | Branković G.
Volume: 44
Issue: 3
Year: 2012





Soft magnetic properties of MnZn ferrites prepared by powder injection moulding

Author(s): Mitrović N.S. | Zlatkov B.S. | Nikolić M.V. | Maričić A.M. | Aleksić O.S. | Đukić S.R. | Danninger H.
Volume: 44
Issue: 3
Year: 2012





The effect of nano-TiO2 addition on the properties of mullite-zirconia composites prepared by slip casting

Author(s): Badiee S.H. | Otroj S. | Rahmani M.
Volume: 44
Issue: 3
Year: 2012





Characterization of nanostructured spinel NiFe2O4 obtained by soft mechanochemical synthesis

Author(s): Lazarević Z.Ž. | Jovalekić Č. | Sekulić D. | Slankamenac M. | Romčević M. | Milutinović A. | Romčević N.Ž.
Volume: 44
Issue: 3
Year: 2012





Low temperature in-situ reaction sintering of zircon: Alumina composites trough spark plasma sintering

Author(s): Anjali M.C. | Biswas P. | Chakravarty D. | Hareesh U.S. | Rao Y.S. | Johnson R.
Volume: 44
Issue: 3
Year: 2012





Study of dielectric behavior and electrical properties of hematite α-Fe2O3 doped with Zn

Author(s): Nikolic M.V. | Slankamenac M.P. | Nikolic N. | Sekulic D.L. | Aleksic O.S. | Mitric M. | Ivetic T. | Pavlovic V.B. | Nikolic P.M.
Volume: 44
Issue: 3
Year: 2012





CaZn1/3Nb2/3O3-based dielectric ceramics for silver co-sintering applications

Author(s): Chaouchi A. | Saidi M. | d’Astorg S. | Marinel S.
Volume: 44
Issue: 3
Year: 2012





Metal rings and discs Matlab/Simulink 3D model for ultrasonic sandwich transducer design

Author(s): Jovanović I. | Mančić D. | Paunović V. | Radmanović M. | Mitić V.V.
Volume: 44
Issue: 3
Year: 2012





Improving the quality of alumina-containing sinter using water-cooled furnace shell

Author(s): Aleksandrov A.V. | Aleksandrov V.V.
Volume: 44
Issue: 3
Year: 2012





The influence of mechanical activation on sintering process of BaCO3-SrCO3-TiO2 system

Author(s): Kosanović Darko | Obradović N. | Živojinović J. | Maričić A. | Pavlović V.P. | Pavlović V.B. | Ristić M.M.
Volume: 44
Issue: 3
Year: 2012





Sintering behavior and property of bioglass modified HA-Al2O3 composite

Author(s): Wang Li-li | Wang Xiu-Feng | Ding Xu | Zhu Jian-feng
Volume: 44
Issue: 3
Year: 2012





Correlation between grain deviation angles and the partial ordering transformation of grain line in Bi4Si3O12 microcrystals

Author(s): Zhang Z.G. | Jiang Z.Y. | Wang X.F. | Tian Q.Q.
Volume: 44
Issue: 3
Year: 2012





Non-isothermal crystallization kinetics and phase transformation of Bi2O3-SiO2 glass-ceramics

Author(s): Guo H.W. | Wang X.F. | Gao D.N.
Volume: 43
Issue: 3
Year: 2011





Solid state synthesis of extra phase-pure Li4Ti5O12 spinel

Author(s): Veljković I. | Poleti D. | Karanović Lj. | Zdujić M. | Branković G.
Volume: 43
Issue: 3
Year: 2011





Synthesis and characterization of screen-printed CdS films

Author(s): Kumar V. | Sharma D.K. | Bansal M.K. | Dwivedi D.K. | Sharma T.P.
Volume: 43
Issue: 3
Year: 2011





Kinetics of integrated liquid phase sintering of glass-alumina composite: Activated pores evolution

Author(s): Yu Cheng-Long | Hao Xin | Jiang Hong-Tao | Wang Li-Li | Wang Xiu-Feng
Volume: 43
Issue: 3
Year: 2011





The phase structure and morphology of electrodeposited nickel-cobalt alloy powders

Author(s): Spasojević M. | Ribić-Zelenović L. | Maričić A.
Volume: 43
Issue: 3
Year: 2011





Effects of laminating and co-firing conditions on the performance of anode-supported Ce0.8Sm0.201.9 film electrolyte

Author(s): Li X. | Lu J. | Wang H.
Volume: 43
Issue: 3
Year: 2011





Silica crown refractory corrosion in glass melting furnaces

Author(s): Balandis A. | Nizeviciene D.
Volume: 43
Issue: 3
Year: 2011





Fabrication of Ti3AlC2/Al2O3 nanocomposite by a novel method

Author(s): Zhu J. | Ye L. | Wang F.
Volume: 43
Issue: 3
Year: 2011





Sintering process influence on microstructure and intergranular impedance of rare-earth modified BaTiO3-ceramics

Author(s): Mitic V.V. | Paunovic V. | Pavlovic V. | Zivkovic Lj.
Volume: 43
Issue: 3
Year: 2011





The hydrothermal synthesis of hydrotalcite by using different partially soluble and insoluble in water mangesium and aluminium components

Author(s): Bankauskaite A. | Baltakys K.
Volume: 43
Issue: 3
Year: 2011





Densification modeling of titanium alloy powder during hot isostatic pressing

Author(s): Xue Y. | Lang L.H. | Bu G.L. | Li L.
Volume: 43
Issue: 3
Year: 2011





Low-temperature synthesis of ZrO2-8 mol.% Y2O3 nanopowder with high sinterability

Author(s): Karagedov G.R. | Avvakumov E.G.
Volume: 43
Issue: 3
Year: 2011





Glass-ceramics obtained by the crystallization of basalt

Author(s): Cocić M. | Logar M. | Matović B. | Poharc-Logar V.
Volume: 42
Issue: 3
Year: 2010





Densification, microstructure and properties of supersolidus liquid phase sintered 6711Al-SiC metal matrix composites

Author(s): Padmavathi C. | Upadhyaya Anish
Volume: 42
Issue: 3
Year: 2010





The effect of CaCO3 addition on the crystallization behavior of ZnO crystal glaze fired at different gloss firing and crystallization temperatures

Author(s): Jamaludin A.R. | Kasim S.R. | Ahmad Z.A.
Volume: 42
Issue: 3
Year: 2010





Effect of sintering time on the microstructure and properties of inorganic polyphosphate bioceramics

Author(s): Wang Q.B. | Wang Q.G. | Wan C.X.
Volume: 42
Issue: 3
Year: 2010





Effect of B2O3 and P2O5 on fluorosilicic mica glass-ceramic sintering process

Author(s): Wu S. | Lv X. | Zhang M. | Chen Y.J. | Zhao R.N.
Volume: 42
Issue: 3
Year: 2010





A comparative thermomagnetic study of melt-spun Nd-Fe-B alloys with different Nd content

Author(s): Grujić A. | Žák T. | Talijan N. | Stajić-Trošić J. | Ćosović V.
Volume: 41
Issue: 3
Year: 2009





Study of barium bismuth titanate prepared by mechanochemical synthesis

Author(s): Lazarević Z.Ž. | Bobić J. | Romčević N.Ž. | Paunović N. | Stojanović B.D.
Volume: 41
Issue: 3
Year: 2009





The effect of polymeric template density and solid loading on the properties of ceramic foam

Author(s): Nor M.A.A.M. | Akil H.M. | Ahmad Z.A.
Volume: 41
Issue: 3
Year: 2009





Aerosol deposition of Ba0.8Sr0.2TiO3 thin films

Author(s): Branković Zorica | Branković G. | Tucić A. | Radojković A. | Longo E. | Varela J.A.
Volume: 41
Issue: 3
Year: 2009





Correlation between isothermal expansion and functional properties change of the Fe81B13Si4C2 amorphous alloy

Author(s): Kalezić-Glišović A. | Maričić V.A. | Kosanović D.A. | Đukić S. | Simeunović R.
Volume: 41
Issue: 3
Year: 2009





Effects of microsilica content on microstructure and strength of lightweight castable refractories containing porous corundum-spinel aggregate

Author(s): Yan W. | Li N. | Han B.Q.
Volume: 41
Issue: 3
Year: 2009





Kinetics of specific surface area change using the Boltzmann model

Author(s): Đorđević N. | Martinović S. | Vlahović M. | Jovanić P. | Vidojković V. | Boljanac T.
Volume: 41
Issue: 3
Year: 2009





Prediction of the sintering shrinkage of glass-alumina functionally graded materials by a BP artificial neural network

Author(s): Yu C.L. | Yang H. | Zhao D.C. | Liu C.C. | Zhang T. | Jiang H.T.
Volume: 41
Issue: 3
Year: 2009





Application of the intergranular impedance model in correlating microstructure and electrical properties of doped BaTiO3

Author(s): Mitić V. | Pavlović V.B. | Kocić Lj. | Paunović V. | Mančić D.
Volume: 41
Issue: 3
Year: 2009





Clausius-Mossotti approximation in the theory of sintered polar materials: A review

Author(s): Kornyushin Y.
Volume: 41
Issue: 3
Year: 2009





Crystallization kinetics of K2O·TiO2·3GeO2 glass studied by DTA

Author(s): Grujić S. | Blagojević N. | Tošić M. | Živanović V. | Nikolić J.
Volume: 40
Issue: 3
Year: 2008





Effect of cold swaging and heat treatment on properties of the P/M 91W-6Ni-3Co heavy alloy

Author(s): Katavić B. | Nikačević M. | Odanović Z.
Volume: 40
Issue: 3
Year: 2008





The effect of structural changes on magnetic permeability of amorphous powder Ni80Co20

Author(s): Maričić A. | Spasojević M. | Arnaut S. | Minić D. | Ristić M.M.
Volume: 40
Issue: 3
Year: 2008





Effect of al content on reaction laser sintering of Ni-Al powder

Author(s): Qin L. | Hu J. | Cui C. | Wang H. | Guo Z.
Volume: 40
Issue: 3
Year: 2008





Electrical characterization and impedance response of lanthanum doped barium titanate ceramics

Author(s): Mančić D. | Paunović V. | Vijatović M. | Stojanović B. | Živković Lj.
Volume: 40
Issue: 3
Year: 2008





Laser irradiation of SiC-MoSi2 composite ceramics

Author(s): Aguilar Marquez P.A. | Vlasova M. | Reséndiz-González M.C. | Kakazey M. | Cruz Mayorga D. | Bykov A. | Tomila T. | Stetsenko V.
Volume: 40
Issue: 3
Year: 2008





Kinetics of the α-β phase transformation in seeded Si3N4 ceramics

Author(s): Bučevac D. | Bošković S. | Matović B.
Volume: 40
Issue: 3
Year: 2008





Prediction of densification and microstructure evolution for α-Al2O3 during pressureless sintering at low heating rates based on the master sintering curve theory

Author(s): Shao W.Q. | Chen S.O. | Li D. | Cao H.S. | Zhang Y.C. | Zhang S.S.
Volume: 40
Issue: 3
Year: 2008





Spectral absorption of unpolarized light through nano-materials in the absence of a magnetic field

Author(s): Luminosu I. | Popov D. | Zaharie I.
Volume: 40
Issue: 3
Year: 2008





Conducting materials based on nanodispersed titanium monoxide

Author(s): Gusev A.A. | Avvakumov E.G.
Volume: 39
Issue: 3
Year: 2007





Kinetics of CxNy formation on electrode surface through electrochemical method

Author(s): Chekhovskii A. | Tomila T. | Ragulya A. | Timofeeva I. | Ivanchuk A. | Bykov D. | Labunets T.
Volume: 39
Issue: 3
Year: 2007





Raman study of Ba-doped ceria nanopowders

Author(s): Radović M. | Dohčević-Mitrović Z. | Šćepanović M. | Grujić-Brojčin M. | Matović B. | Bošković S. | Popović Z.V.
Volume: 39
Issue: 3
Year: 2007





Phase composition and crystallinity degree of nanostructured products of anode oxidation of manganese(II) ions doped by ions of lithium and cobalt(II)

Author(s): Sokolsky G. | Ivanova N. | Ivanov S. | Tomila T. | Boldyrev Ye.
Volume: 39
Issue: 3
Year: 2007





Characterization of bismuth titanate ceramics derived by mechanochemical synthesis

Author(s): Lazarević Z.Ž. | Stojanović B.D. | Paiva-Santos C.O. | Romčević N.Ž. | Varela J.A.
Volume: 39
Issue: 3
Year: 2007





Microstructural development and evolution of liquid phase sintered Cr-Cu composites

Author(s): Khomenko E. | Ragulya A. | Lesnik N. | Minakova R.
Volume: 39
Issue: 3
Year: 2007





Analysis of isothermal sintering of zinc-titanate doped with MgO

Author(s): Obradović N. | Stevanović S. | Mitrić M. | Nikolić M.V. | Ristić M.M.
Volume: 39
Issue: 3
Year: 2007





Influence of Bi2O3 on microstructure and electrical properties of ZnO-SnO2 ceramics

Author(s): Ivetić T. | Nikolić M.V. | Slankamenac M. | Živanov M. | Minić D. | Nikolić P.M. | Ristić M.M.
Volume: 39
Issue: 3
Year: 2007





Sintering behavior of Y2O3 doped Bi2O3 ceramics

Author(s): Alizadeh M. | Maghsoudipour A. | Moztarzadeh F. | Ahmadi K. | Saremi M.
Volume: 39
Issue: 3
Year: 2007





The effect of pressing pressure on the magnetic properties of amorphous Co80Ni20 alloy powder

Author(s): Simeunović R. | Maričić A. | Kalezić-Glišović A. | Spasojević M.
Volume: 38
Issue: 3
Year: 2006





The effect of secondary abnormal grain growth on the dielectric properties of La/Mn co-doped BaTiO3 ceramics

Author(s): Živković Lj.M. | Paunović V.V. | Stamenkov N.Lj. | Miljković M.M.
Volume: 38
Issue: 3
Year: 2006





Nd pronounced anharmonicity in IR spectra of CaWO4 single crystals

Author(s): Golubović A. | Gajić R. | Dohčević-Mitrović Z. | Nikolić S.
Volume: 38
Issue: 3
Year: 2006





Influence of the phase composition of refractory materials on creep

Author(s): Terzić A. | Pavlović Lj. | Milutinović-Nikolić A.
Volume: 38
Issue: 3
Year: 2006





Mechanical and thermal-expansion characteristics of Ca10(PO4)6(OH)2-Ca3(PO4)2 composites

Author(s): Ruseska G. | Fidancevska E. | Bossert J.
Volume: 38
Issue: 3
Year: 2006





Properties of sintered Al2O3-Cr composites depending on the method of preparation of the powder mixture

Author(s): Chmielewski M. | Pietrzak K. | Włosiński W.
Volume: 38
Issue: 3
Year: 2006





Geometrical and electrical properties of NTC polycrystalline thermistors vs. Changes of sintering parameters

Author(s): Savić S.M. | Aleksić O.S. | Nikolić P.M. | Luković D.T.
Volume: 38
Issue: 3
Year: 2006





Influence of structural changes on electrical and magnetic properties of the Co84Fe5,3Si8,5B2,2 amorphous alloy

Author(s): Đukić S.R. | Simeunović Radojko L. | Maričić Aleksa M.
Volume: 37
Issue: 3
Year: 2005





An approach to analyzing synthesis, structure and properties of bismuth titanate ceramics

Author(s): Lazarević Z. | Stojanović B.D. | Varela J.A.
Volume: 37
Issue: 3
Year: 2005





Influence of Bi2O3 on sintering and crystallization of cordierite ceramics

Author(s): Đorđević N.
Volume: 37
Issue: 3
Year: 2005





Influences of composition of starting powders and sintering temperature on the pore size distribution of porous corundum-mullite ceramics

Author(s): Shujing Li | Nan Li
Volume: 37
Issue: 3
Year: 2005





Characterization of dispersion strengthened copper with 3wt%Al2O3 by mechanical alloying

Author(s): Rajković Višeslava | Erić Olivera | Božić Dušan | Mitkov M. | Romhanji Endre
Volume: 36
Issue: 3
Year: 2004





Influence of the changes of free electron density on electrical and magnetic properties of the CO70Fe5Si10B15 amorphous alloy

Author(s): Maričić Aleksa M. | Minić-Popović Dragica M. | Zak T.
Volume: 36
Issue: 3
Year: 2004





The synthesis: Structure relationship in the ZnO-Cr2O3 system

Author(s): Mančić Lidija T. | Marinković Zorica V. | Vulić P. | Milošević Olivera B.
Volume: 36
Issue: 3
Year: 2004





Structure study of donor doped barium titan ate prepared from citrate solutions

Author(s): Stojanović B.D. | Mastelaro V.R. | Paiva Santos C.O. | Varela J.A.
Volume: 36
Issue: 3
Year: 2004





Sintering AL2O3-CR composites made from micro-and Nan powders

Author(s): Pietrzak K. | Chmielewski M. | Włosiński W.
Volume: 36
Issue: 3
Year: 2004





Investigation of sintering kinetics of NiO using photo acoustic spectroscopy

Author(s): Nikolić M.V. | Luković D. | Savić S. | Blagojević V. | Nikolić Pantelija M.
Volume: 36
Issue: 3
Year: 2004





Dense nanostructured materials obtained by spark plasma sintering and field activated pressure assisted synthesis starting from mechanically activated powder mixtures

Author(s): Bernard F. | le Gallet S. | Spinassou N. | Paris S. | Gaffet E. | Woolman J.N. | Munir Z.A.
Volume: 36
Issue: 3
Year: 2004





Phenomenological theory of sintering and its application to swelling

Author(s): Kornyushin Y.
Volume: 36
Issue: 3
Year: 2004





Structural-phase transformations in bentonite after acid treatment

Author(s): Vlasova M. | Dominguez-Patiño G. | Kakazey N. | Dominguez-Patiño M. | Juarez-Romero D. | Méndez Enríquez Y.
Volume: 35
Issue: 3
Year: 2003





Effects of powder preparation and sintering procedure on microstructure and dielectric properties of PLZT ceramics

Author(s): Živković Ljiljana M. | Stojanović Biljana D. | Foschini C.R. | Paunović Vesna V. | Mančić Dragan D.
Volume: 35
Issue: 3
Year: 2003





Determination of activation energy of sintering of ThO2-U3O8 pellets using the master sintering curve approach

Author(s): Kutty T.R.G. | Khan K.B. | Hegde P.V. | Sengupta A.K. | Majumdar S. | Kamath H.S.
Volume: 35
Issue: 3
Year: 2003





Mechanoactivation of chromium silicide formation in the SiC-Cr-Si system

Author(s): Vlasova M. | Kakazey M. | Gonzales-Rodriguez J.G. | Dominguez G. | Ristić Momčilo M. | Scherbina O. | Tomila T. | Isaeva L. | Timofeeva I.I. | Bukov A.
Volume: 34
Issue: 3
Year: 2002





Mechanical properties of microwave sintered Si3N4-based ceramics

Author(s): Getman O.I. | Holoptsev V.V. | Panichkina V.V. | Plotnikov I.V. | Soolshenko V.K.
Volume: 34
Issue: 3
Year: 2002





Sintering and composition of a powder mixture of fine Al2O3 and beta-sialon composite made from bauxite

Author(s): Nan L.I. | Jun Wang
Volume: 34
Issue: 3
Year: 2002





Diffusion parameters in liquid phase sintering of the al-cu system

Author(s): Lapshin O.V. | Savitskii A.P. | Ovcharenko V.E.
Volume: 34
Issue: 3
Year: 2002





Effect of cobalt oxide on the sintering and grain growth of Al2O3-YAG composite nanopowder

Author(s): Hassanzadeh-Tabrizi S.A. | Taheri-Nassaj E.
Volume: 42
Issue: 3
Year: 2010





Comparative evaluation of spark plasma (SPS), microwave (MWS),two stage sintering (TSS) and conventional sintering (CRH) on the densification and micro structural evolution of fully stabilized zirconia ceramics

Author(s): Rajeswari K. | Hareesh U.S. | Subasri R. | Chakravarty Dibyendu | Johnson R.
Volume: 42
Issue: 3
Year: 2010





Influence of diatomite microstructure on its adsorption capacity for Pb(II)

Author(s): Nenadović S. | Nenadović M. | Kovačević R. | Matović Lj. | Matović B. | Jovanović Z. | Novaković-Grbović J.
Volume: 41
Issue: 3
Year: 2009





Thermodynamics of the formation of mesostructures in nanodispersed composite materials

Author(s): Lisovsky A.F.
Volume: 41
Issue: 3
Year: 2009





Fabrication and microstructures of YAG transparent ceramics

Author(s): Liu M. | Wang S.W. | Tang D.Y. | Chen L.D. | Ma J.
Volume: 40
Issue: 3
Year: 2008





Cerium oxide based nanometric powders: synthesis and characterization

Author(s): Ninić M. | Bošković S. | Nenadović M. | Zec S. | Voisavljević K. | Minić D. | Matović B.
Volume: 39
Issue: 3
Year: 2007





Investigation of sintering kinetics of ZnO by observing reduction of the specific surface area

Author(s): Stevanović S. | Zeljković V. | Obradović N. | Labus N.
Volume: 39
Issue: 3
Year: 2007





Far infrared properties of sintered PbTe doped with boron

Author(s): Nikolić P.M. | Paraskevopoulos K.M. | Zorba T.T. | Pavlidou E. | Kantiranis N. | Vujatović S.S. | Aleksić O.A. | Nikolić M.V. | Ivetić T. | Savić S. | Labus N. | Blagojević V.
Volume: 39
Issue: 3
Year: 2007





Mechanochemical activation of batch during fabrication of highly-porous cordierite materials based on natural oxide compounds

Author(s): Antsiferov V.N. | Porozova S.E. | Karmanov V.I.
Volume: 38
Issue: 3
Year: 2006





The impure retardation of interparticle joining surface migration

Author(s): Dorofeyev V.Yu. | Yegorov S.N.
Volume: 37
Issue: 3
Year: 2005





Synthesis of Ti4O7 magneli phase using mechanical activation

Author(s): Gusev A.A. | Avvakumov E.G. | Vinokurova O.B.
Volume: 35
Issue: 3
Year: 2003





Modern concepts of conversion and storage of energy by dispersed materials absorption

Author(s): Minić-Popović Dragica M. | Šušić M.V.
Volume: 34
Issue: 3
Year: 2002





Thermal-expansion and mechanical properties of the Ca10(P04)6(OH)2-TiO2 composite

Author(s): Fidancevska E. | Ruseska G. | Zafirovski S. | Pavlovski B.
Volume: 34
Issue: 3
Year: 2002





On the application of Laplace pressure in the science of sintering

Author(s): Lisovsky A.F.
Volume: 42
Issue: 3
Year: 2010





An overview of the effects of thermal processing on bioactive glasses

Author(s): Bellucci D. | Cannillo V. | Sola A.
Volume: 42
Issue: 3
Year: 2010





Threshold conversion for field emission scanning electron micrograph of glass-alumina composites in determining the activated interfaces

Author(s): Yu C.L. | Hao X. | Jiang H.T. | Wang L.L.
Volume: 42
Issue: 3
Year: 2010





Synthesis of composite AlN-AlON-Al2O3 powders and ceramics prepared by high-pressure sintering

Author(s): Vlasova M. | Kakazey N. | Rosales I. | Krushinskaya L. | Bykov A. | Tomila T. | Voitsehovskaya E. | Vinokurov V.
Volume: 42
Issue: 3
Year: 2010





Effect of recycling blast furnace flue dust as pellets on the sintering performance

Author(s): El-Hussiny N.A. | Shalabi M.E.H.
Volume: 42
Issue: 3
Year: 2010





Electromagnetic wave scattering on imperfect cloaking devices

Author(s): Isić G. | Beltaos A. | Gajić R. | Hingerl K.
Volume: 40
Issue: 3
Year: 2008





History and challenges of barium titanate: Part II

Author(s): Vijatović M.M. | Bobić J.D. | Stojanović B.D.
Volume: 40
Issue: 3
Year: 2008





Analysis of early-stage sintering mechanisms of mechanically activated BaTiO3

Author(s): Nikolić M.V. | Pavlović V.P. | Pavlović V.B. | Ristić M.M.
Volume: 38
Issue: 3
Year: 2006





A nanoindentation study of magnetron co-sputtered nanocrystalline ternary nitride coatings

Author(s): Yeung W.Y. | Dub S.N. | Wuhrer R. | Milman Yu.V.
Volume: 38
Issue: 3
Year: 2006





Laser treatment of SiC-C5Si3 ceramics in N2-O2 medium

Author(s): Vlasova M. | Marquez Aguilar P.A. | Kakazey M. | Tomila T. | Bykov A. | Ragulya A.
Volume: 37
Issue: 3
Year: 2005





Modeling of dimensional changes during sintering

Author(s): Drndarević D. | Đuričić M.
Volume: 37
Issue: 3
Year: 2005





Sixty years of the theory of B. Ya. Pines

Author(s): Ristić M.M. | Nikolić M.V.
Volume: 38
Issue: 3
Year: 2006





Ford R.G., Hershberger R.H.: Funtionally graded materials: Technology leveraged applications, proceedings of the 2002 International conference, may 6-7, 2002, Denver, Colorado, USA, "Metal powder indu

Author(s): Upadhyaya G.S.
Volume: 36
Issue: 3
Year: 2004





Gupta C.K.: Chemical metallurgy: Principles and practice, "Wiley-VCH", Weinheim, 2003, pp. 811

Author(s): Upadhyaya G.S.
Volume: 36
Issue: 3
Year: 2004





Clark D.E., Folz D.C., Mcgee T.D.: An introduction to ceramic engineering design, "American Ceramic Society", Westerville, Ohio, USA, 2002, pp. 446

Author(s): Upadhyaya G.S.
Volume: 36
Issue: 3
Year: 2004





Holland W., Beall G.: Glass-ceramic technology,"The American Ceramic Society", Westerville, OH, USA, 2002, pp. 372

Author(s): Upadhyaya G.S.
Volume: 36
Issue: 3
Year: 2004





Uskoković D.P., Milonjić S.K., Raković D.I.: Progres sin advanced materials and processes,"Trans Tech Publications Ltd.", Switzerland, 2004, pp. 583

Author(s): Upadhyaya G.S.
Volume: 36
Issue: 3
Year: 2004





Thermal diffusivity of sintered 12CaO-7Al2O3

Author(s): Nikolić Pantelija M. | Luković D. | Savić S. | Urošević Dragan B. | Đurić S.
Volume: 35
Issue: 3
Year: 2003





Sintering of low-melting glass powders and glass-abrasive composites

Author(s): Shilo A.E. | Bondarev E.K. | Kukharenko S.A.
Volume: 35
Issue: 3
Year: 2003





Improvement of the mechanical properties of spark plasma sintered hap bioceramics by decreasing the grain size and by adding multi-walled carbon nanotubes

Author(s): Veljović Đ. | Vuković G. | Steins I. | Palcevskis E. | Uskoković P.S. | Petrović R. | Janaćković Đ.
Volume: 45
Issue: 2
Year: 2013





Electronic ceramic structure within the Voronoi cells model and microstructure fractals contacts surfaces new frontier applications

Author(s): Mitić V.V. | Paunović V. | Janković S. | Pavlović V. | Antolović I. | Rančić D.
Volume: 45
Issue: 2
Year: 2013





ZnTiO3 ceramic nanopowder microstructure changes during compaction

Author(s): Labus N. | Krstić J. | Marković S. | Vasiljević-Radović D. | Nikolić M.V. | Pavlović V.
Volume: 45
Issue: 2
Year: 2013





Study on critical damage factor and the constitutive model including dynamic recrystallization softening of AZ80 magnesium alloy

Author(s): Xue Y. | Zhang Z.M. | Wu Y.J.
Volume: 45
Issue: 2
Year: 2013





Optoelectronic properties correlation to preparation of Au/La-oxide nanocomposite films

Author(s): Dakhel A.A.
Volume: 45
Issue: 2
Year: 2013





Magnesia-zircon brick: Evolution of microstructure, properties and performance with increasing sintering temperature

Author(s): Gao J. | Guo Z. | Wang L. | Jiang W.
Volume: 45
Issue: 2
Year: 2013





Microstructure refinement and physical properties of Ag-SnO2 based contact materials prepared by high-energy ball milling

Author(s): Ćosović V. | Pavlović M. | Ćosović A. | Vulić P. | Premović M. | Živković D. | Talijan N.
Volume: 45
Issue: 2
Year: 2013





Effect of particle size on the pore characterization and strength of porous cordierite-mullite ceramics prepared by a pore-forming in-situ technique

Author(s): Yan W. | Li N. | Tong J. | Liu G. | Xu J.
Volume: 45
Issue: 2
Year: 2013





Influence of prolonged sintering time on density and electrical properties of isothermally sintered cordierite-based ceramics

Author(s): Peleš A. | Đorđević N. | Obradović N. | Tadić N. | Pavlović V.B.
Volume: 45
Issue: 2
Year: 2013





Solid state batteries (SSBs) prepared with powder metallurgy route

Author(s): Hu J. | Zhao J. | Ren J.J.
Volume: 45
Issue: 2
Year: 2013





The effect of sintering temperature on the structure and properties of calcium hexaluminate/anorthite ceramics

Author(s): Tian Y. | Qiu Y. | Chai Y. | Bai P. | Gong C.
Volume: 45
Issue: 2
Year: 2013





Investigation of sintering kinetics of magnesium titanate

Author(s): Petrović V.V. | Milošević H. | Pavlović V.V.
Volume: 45
Issue: 2
Year: 2013





Preparation and characterization of tubular ceramic support for use in transesterification process

Author(s): Sharif Sharmiwati Mohammed | Ahmad Arifin Zainal | Othman Roslee Mohd
Volume: 44
Issue: 2
Year: 2012





Defectoscopy of direct laser sintered metals by low transmission ultrasonic frequencies

Author(s): Ebersold Zoran | Mitrović Nebojša | Đukić Slobodan | Jordović Branka | Peulić Aleksandar
Volume: 44
Issue: 2
Year: 2012





Master Sintering Surface: A practical approach to its construction and utilization for Spark Plasma Sintering prediction

Author(s): Pouchly V. | Maca K. | Xiong Y. | Shen J.Z.
Volume: 44
Issue: 2
Year: 2012





Influence of sintering temperature on raw and beneficiated clay “Klokoti”

Author(s): Jovanović Marina | Volkov-Husović Tatjana
Volume: 44
Issue: 2
Year: 2012





Construction of master sintering curve of ThO2 pellets using optimization technique

Author(s): Ray Aditi | Banerjee Joydipta | Kutty T.R.G. | Kumar Arun | Banerjee Srikumar
Volume: 44
Issue: 2
Year: 2012





Synthesis and sintering of high-temperature composites based on mechanically activated fly ash

Author(s): Terzić A. | Pavlović Lj. | Obradović N. | Pavlović V. | Stojanović J. | Miličić Lj. | Radojević Z. | Ristić M.M.
Volume: 44
Issue: 2
Year: 2012





A study of cordierite ceramics synthesis from serpentine tailing and kaolin tailing

Author(s): Zhu P. | Wang L.Y. | Hong D. | Zhou M.
Volume: 44
Issue: 2
Year: 2012





State of the art and challenges in development of electrical contact materials in the light of the RoHS directive

Author(s): Ćosović V. | Ćosović A. | Talijan N. | Živković D. | Živković Ž.
Volume: 44
Issue: 2
Year: 2012





Effect of the cBN content and sintering temperature on the transverse rupture strength and hardness of cBn/diamond cutting tools

Author(s): Kır Durmuş | Islak Serkan | Çelik Halis | Çelik Ertuğrul
Volume: 44
Issue: 2
Year: 2012





Ho2O3 additive effects on BaTiO3 ceramics microstructure and dielectric properties

Author(s): Paunović Vesna | Mitić Vojislav V. | Miljković Miroslav | Pavlović Vera | Živković Ljiljana
Volume: 44
Issue: 2
Year: 2012





Soft combustion technique: Solution combustion synthesis and low-temperature combustion synthesis; to prepare Bi4Ti3O12 powders and bulk ceramics

Author(s): Al-Amani Umar | Sreekantan S. | Fauzi Ahmad M.N. | Khairunisak A.R. | Warapong K.
Volume: 44
Issue: 2
Year: 2012





Effect of milling and annealing on microstructural, electrical and magnetic properties of electrodeposited Ni-11.3 Fe-1.4w alloy

Author(s): Spasojević M. | Ribić-Zelenović L. | Ćirović N. | Spasojević P. | Maričić A.
Volume: 44
Issue: 2
Year: 2012





A glass-ceramic material for fixation of radioactive waste

Author(s): Bozadzhiev L.S. | Georgiev G.T. | Bozadzhiev R.L.
Volume: 43
Issue: 2
Year: 2011





Mechanical properties of biomorphic silicon carbide ceramics

Author(s): Gordic M.V. | Babic B.M. | Stasic J.M. | Trtica M.S. | Volkov-Husovic T. | Posarac M.B. | Matovic B.Z.
Volume: 43
Issue: 2
Year: 2011





Damage types of crossed helical gears with wheels from sintered steel

Author(s): Miltenović A. | Predki W.
Volume: 43
Issue: 2
Year: 2011





Electrical properties and microstructure fractal analysis of magnesium-modified aluminium-silicate ceramics

Author(s): Purenović J. | Mitić V.V. | Kocić Lj. | Pavlović V.B. | Paunović V. | Purenović M.
Volume: 43
Issue: 2
Year: 2011





Synthesis and characterization of porous biphasic calcium phosphate scaffold from different porogens for possible bone tissue engineering applications

Author(s): Amera A. | Abudalazez A.M.A. | Ismail Rashid A. | Razak Abd Hayati N. | Masudi Malik S. | Kasim Rizal S. | Ahmad Arifin Z.
Volume: 43
Issue: 2
Year: 2011





The effect of temperature and frequency on magnetic properties of the Fe81B13Si4C2 amorphous alloy

Author(s): Đukić S. | Maričić V. | Kalezić-Glišović A. | Ribić-Zelenović L. | Ranđić S. | Mitrović N.
Volume: 43
Issue: 2
Year: 2011





Formation of mesostructure in WC-Co cemented carbides: A review

Author(s): Lisovsky A.F.
Volume: 43
Issue: 2
Year: 2011





The effect of vanadium-carbon monolayer on the adsorption of tungsten and carbon atoms on tungsten-carbide (0001) surface

Author(s): Moitra A. | Kim S. | Park S.J. | Kim S.G. | Horstemeyer M.F.
Volume: 43
Issue: 2
Year: 2011





Sintering of mechanically activated magnesium-titanate and barium-zinc-titanate ceramics

Author(s): Obradović N. | Filipović S. | Pavlović V.B. | Maričić A. | Mitrović N. | Ristić M.M.
Volume: 43
Issue: 2
Year: 2011





Equilibrium neck shapes for initial stages of solid-state sintering due to surface diffusion in a disk model of clays

Author(s): Medved I. | Moravčíková J.
Volume: 43
Issue: 2
Year: 2011





Sintering nanodisperse zirconium powders with various stabilizing additives

Author(s): Antsiferov V.N. | Porozova S.E. | Kulmetyeva V.B.
Volume: 43
Issue: 2
Year: 2011





Interdependence of fundamental and applied research in material science

Author(s): Kosanović D. | Maričić A. | Mitrović N. | Ristić M.M.
Volume: 43
Issue: 2
Year: 2011





Effect of the change of firing temperature on microstructure and physical properties of clay bricks from Beruas (Malaysia)

Author(s): Johari I. | Said S. | Hisham B. | Bakar A. | Ahmad Z.A.
Volume: 42
Issue: 2
Year: 2010





Influence of the gypsum dehydration temperature and alkali additives on the properties of anhydrite cement

Author(s): Leskeviciene V. | Sarlauskaite I. | Nizeviciene D. | Kybartiene N.
Volume: 42
Issue: 2
Year: 2010





Structure and magnetic investigations of Ca1-xYxMnO3 (x=0, 0.1, 0.2, 0.3) and Mn4+/Mn3+ relation analysis

Author(s): Zagorac J. | Bošković S. | Matović B. | Babić-Stojić B.
Volume: 42
Issue: 2
Year: 2010





Granulation of coke breeze fine for using in the sintering process

Author(s): Mohamed F.M. | El-Hussiny N.A. | Shalabi M.E.H.
Volume: 42
Issue: 2
Year: 2010





Effect of aging on the microstructures and mechanical properties of AZ80 and ZK60 wrought magnesium alloys

Author(s): Wu Y.J. | Zhang Z.M. | Li B.C.
Volume: 42
Issue: 2
Year: 2010





Influence of mechanical activation on microstructure and crystal structure of sintered MgO-TiO2 system

Author(s): Filipović S. | Obradović N. | Pavlović V.B. | Marković S. | Mitrić M. | Ristić M.M.
Volume: 42
Issue: 2
Year: 2010





Influence of the damage level during quenching on thermal shock behavior of low cement castable

Author(s): Martinović S. | Majstorović J. | Vidojković V. | Volkov-Husović T.
Volume: 42
Issue: 2
Year: 2010





Study of Nd-Fe-B alloys with nonstoichiometric Nd content in optimal magnetic state

Author(s): Ćosović V. | Talijan N. | Grujić A. | Stajić-Trošić J. | Žák T. | Lee Z. | Radmilović V.
Volume: 41
Issue: 2
Year: 2009





Microstructure and properties of boronizing layer of Fe-based powder metallurgy compacts prepared by boronizing and sintering simultaneously

Author(s): Dong X. | Hu J. | Huang Z. | Wang H. | Gao R. | Guo Z.
Volume: 41
Issue: 2
Year: 2009





Fabrication and fibre matrix interface characteristics of Cu/C(Fe) composite

Author(s): Li Y. | Bai P. | Li Y.
Volume: 41
Issue: 2
Year: 2009





The influence of powder particle size on properties of Cu-Al2O3 composites

Author(s): Rajković V. | Božić D. | Popović M. | Jovanović M.T.
Volume: 41
Issue: 2
Year: 2009





The effect of structural changes during sintering on the electric and magnetic traits of the Ni96.7Mo3.3 alloy nanostructured powder

Author(s): Ribić-Zelenović L. | Spasojević M. | Maričić A. | Ristić M.M.
Volume: 41
Issue: 2
Year: 2009





Bonding evolution with sintering temperature in low alloyed steels with chromium

Author(s): Fuentes-Pacheco L. | Campos M.
Volume: 41
Issue: 2
Year: 2009





Preparation of nanosized non-oxide powders using diatomaceous earth

Author(s): Šaponjić A. | Babić B. | Devečerski A. | Matović B.
Volume: 41
Issue: 2
Year: 2009





In-situ processing of TiB2 nanoparticle-reinforced copper matrix composites

Author(s): Božić D. | Cvijović-Alagić I. | Dimčić B. | Stašić J. | Rajković V.
Volume: 41
Issue: 2
Year: 2009





Morphology and microstructure of annealed Ni-Co alloy powders electrodeposited on copper substrates

Author(s): Rafailović L.D. | Maričić A.M. | Artner W. | Nauer G.E. | Minić D.M.
Volume: 41
Issue: 2
Year: 2009





Design of experiment approach for sintering study of nanocrystalline SiC fabricated using plasma pressure compaction

Author(s): Bothara M.G. | Vijay P. | Atre S.V. | Park S.J. | German R.M. | Sudarshan T.S. | Radhakrishnan R.
Volume: 41
Issue: 2
Year: 2009





Influence of mechanical activation on structural and electrical properties of sintered MgTiO3 ceramics

Author(s): Filipović S. | Obradović N. | Pavlović V. | Petrović V. | Mitrić M.
Volume: 41
Issue: 2
Year: 2009





Densification strain rate in sintering of Tho2 and ThO2-0.25% Nb2O5 pellets

Author(s): Kutty T.R.G. | Khan K.B. | Kumar A. | Kamath H.S.
Volume: 41
Issue: 2
Year: 2009





Influence of the composition of the boroning mixture on the dimension change of pressed and boroned samples from iron powder

Author(s): Ivanov S. | Požega E.
Volume: 40
Issue: 2
Year: 2008





Recent advances in CIM technology

Author(s): Zlatkov B.S. | Griesmayer E. | Loibl H. | Aleksić O.S. | Danninger H. | Gierl C. | Lukić L.S.
Volume: 40
Issue: 2
Year: 2008





Influence of excess sodium ions on the specific surface area formation in a NiO-Al2O3 catalyst prepared by different methods

Author(s): Lazić M.M. | Hadnađev M.S. | Bošković G.C. | Obadović D.Ž. | Kiss E.E.
Volume: 40
Issue: 2
Year: 2008





Optical glass compatibility for the design of apochromatic systems

Author(s): Gruescu C. | Nicoara I. | Popov D. | Bodea R. | Hora H.
Volume: 40
Issue: 2
Year: 2008





Some laws of a system with a constant amount of energy

Author(s): Blagojević D. | Popović H. | Popović Z. | Stefanović D. | Stefanović I.
Volume: 40
Issue: 2
Year: 2008





Methods of characterization of multiphase Nd-Fe-B melt-spun alloys

Author(s): Grujić A. | Ćosović V. | Stajić-Trošić J. | Maričić A. | Talijan N.
Volume: 39
Issue: 2
Year: 2007





A simplified analytical approach to calculation of the electromagnetic behavior of left-handed metamaterials with a graded refractive index profile

Author(s): Dalarsson N. | Maksimović M. | Jakšić Z.
Volume: 39
Issue: 2
Year: 2007





Structural and ferroelectrical properties of bismuth titanate ceramic powders prepared by mechanically assisted synthesis

Author(s): Lazarević Z.Ž. | Romčević N.Ž. | Todorović M. | Stojanović B.D.
Volume: 39
Issue: 2
Year: 2007





Investigation of photoconductivity in n-type Galium doped PbTe

Author(s): Stojanović D. | Romčević N. | Trajić J. | Hadžić B. | Romčević M. | Khokhlov D.R.
Volume: 39
Issue: 2
Year: 2007





Photoacoustic properties of single crystal PbTe(Ni)

Author(s): Luković D. | Nikolić P.M. | Vujatović S. | Savić S. | Urošević D.
Volume: 39
Issue: 2
Year: 2007





Investigation of zinc stannate synthesis using photoacoustic spectroscopy

Author(s): Ivetić T. | Nikolić M.V. | Nikolić P.M. | Blagojević V. | Đurić S. | Srećković T. | Ristić M.M.
Volume: 39
Issue: 2
Year: 2007





Analysis of the properties of a Cu-Al2-O3 sintered system based on ultra fine and nanocomposite powders

Author(s): Anđić Z. | Korać M. | Kamberović Z. | Vujović A. | Tasic M.
Volume: 39
Issue: 2
Year: 2007





Integrated liquid-phase sintering of glass-alumina functionally graded materials

Author(s): Yu C.L. | Wang X.F. | Tong X. | Jiang H.T. | Wang G.W.
Volume: 39
Issue: 2
Year: 2007





Reaction sintering of the 2ZnO-TiO2 system

Author(s): Obradović N. | Labus N. | Srećković T. | Stevanović S.
Volume: 39
Issue: 2
Year: 2007





Effect of mechanical activation on the sintering of transition nanoscaled alumina

Author(s): Bossert J. | Fidancevska E.
Volume: 39
Issue: 2
Year: 2007





Finite difference method for computer study of the interfacial heat transfer coefficient during rapid solidification of spherical samples on a metallic substrate

Author(s): Nikolić Z.S. | Yoshimura M. | Araki S. | Fujiwara T.
Volume: 39
Issue: 2
Year: 2007





The master sintering curve for pressure-less sintering of TiO2

Author(s): Li D. | Chen S. | Jing Y. | Shao W. | Zhang Y. | Luan W.
Volume: 39
Issue: 2
Year: 2007





Modification of the structural and optical properties of commercial ZnO powder by mechanical activation

Author(s): Šćepanović M. | Srećković T. | Vojisavljević K. | Ristić M.M.
Volume: 38
Issue: 2
Year: 2006





The influence of structural changes on electrical and magnetic characteristics of amorphous powder of the nixmoy alloy

Author(s): Ribić-Zelenović Lenka | Rafailović L. | Spasojević M. | Maričić A.
Volume: 38
Issue: 2
Year: 2006





Correlation between the crystallization process and change in electron density of states in amorphous powder of the Ni80Co20 alloy

Author(s): Ranđić S. | Maričić A. | Rafailović L. | Spasojević M. | Ristić M.M.
Volume: 38
Issue: 2
Year: 2006





Electrical properties of mechanically activated zinc oxide

Author(s): Vojisavljević K. | Žunić M. | Branković G. | Srećković T.
Volume: 38
Issue: 2
Year: 2006





Subwavelength hole arrays with nanoapertures fabricated by scanning probe nanolithography

Author(s): Jakšić Z. | Maksimović M. | Vasiljević-Radović D. | Sarajlić M.
Volume: 38
Issue: 2
Year: 2006





IV-VI ferromagnetic semiconductors recent studies

Author(s): Dobrowolski W. | Arciszewska M. | Brodowska B. | Domukhovski V. | Dugaev V.K. | Grzęda A. | Kuryliszyn-Kudelska I. | Wójcik M. | Slynko E.I.
Volume: 38
Issue: 2
Year: 2006





Magnetic properties of ND Rich Melt-Spun ND-FE-B alloy

Author(s): Grujić Aleksandar | Talijan Nadežda M. | Maričić Aleksa M. | Stajić-Trošić Jasna T. | Ćosović Vladan | Radojević Vesna J.
Volume: 37
Issue: 2
Year: 2005





Metastable phase state during mechanical alloying

Author(s): Skakov Yu.A.
Volume: 37
Issue: 2
Year: 2005





Synthesis and characterization of zinc titanate nano-crystal powders obtained by mechanical activation

Author(s): Obradović Nina | Labus Nebojša J. | Srećković Tatjana V. | Minić D. | Ristić Momčilo M.
Volume: 37
Issue: 2
Year: 2005





Influence of mechanical activation on synthesis of zinc metatitanate

Author(s): Labus Nebojša J. | Obradović Nina | Srećković Tatjana V. | Mitić V. | Ristić Momčilo M.
Volume: 37
Issue: 2
Year: 2005





Fracture, grinding, mechanical activation and synthesis processes in solids under mechanical action

Author(s): Chaikina M.V. | Aman Sergej
Volume: 37
Issue: 2
Year: 2005





Mechanism of mechanochemical synthesis of complex oxides and the peculiarities of their nano-structurization determining sintering

Author(s): Zyryanov V.V.
Volume: 37
Issue: 2
Year: 2005





The effect of temperature on structural changes of NI55CO45 amorphous powder

Author(s): Spasojević M. | Maričić Aleksa M. | Rafailović Lidija
Volume: 36
Issue: 2
Year: 2004





Application of the plasticity characteristic determined by the indentation technique for evaluation of mechanical properties of coatings: II. guidelines to coating development and processing control

Author(s): Byakova A.V. | Milman YU.V. | Vlasov A.A.
Volume: 36
Issue: 2
Year: 2004





The influence of density of pressed iron powder samples on the quality of boride layers

Author(s): Ivanov S. | Stanojević B.
Volume: 35
Issue: 2
Year: 2003





Mechanically stable insoluble titanium-lead anodes for sulfate electrolytes

Author(s): Chmiola J. | Gogotsi Y. | Ferdman A.
Volume: 35
Issue: 2
Year: 2003





Modeling of coating optical fibers with polymer-magnetic powder composite coating

Author(s): Milutinović-Nikolić Aleksandra | Talijan Nadežda M. | Aleksić Radoslav R.
Volume: 34
Issue: 2
Year: 2002





Sintering densification curve: A practical approach for its construction from dilatometric shrinkage data

Author(s): Maca K. | Pouchly V. | Boccaccini A.R.
Volume: 40
Issue: 2
Year: 2008





Liquid phase sintering, II: Computer study of skeletal settling and solid phase extrication in a microgravity environment

Author(s): Nikolić Z.S.
Volume: 40
Issue: 2
Year: 2008





Far-infrared spectroscopy of a nanocomposite of polyvinyl alcohol and lead sulfide nanoparticles

Author(s): Kostić R. | Romčević M. | Marković D. | Kuljanin J. | Čomor M.I.
Volume: 38
Issue: 2
Year: 2006





Infrared study of nonstoichiometric anatase TiO2 nanopowders

Author(s): Grujić-Brojčin M. | Šćepanović M. | Dohčević-Mitrović Z. | Popović Z.V.
Volume: 38
Issue: 2
Year: 2006





Fine defective structure of silicon carbide powders obtained from different starting materials

Author(s): Tomila T.V. | Vlasova M.V. | Kakazey M.G. | Vyshnyakova K.L. | Ragulya A.V. | Pereselentseva L.N.
Volume: 38
Issue: 2
Year: 2006





Structure and surface composition of NiCr sputtered thin films

Author(s): Petrović S. | Bundaleski N. | Radović M. | Ristić Z. | Gligorić G. | Peruško D. | Zec S.
Volume: 38
Issue: 2
Year: 2006





Influence of the electron-phonon iinteraction on phonon heat conduction in a molecular nanowire

Author(s): Galović Slobodanka P. | Čevizović D. | Zeković S. | Ivić Z.
Volume: 38
Issue: 2
Year: 2006





Liquid phase sintering of dense and porous glass-ceramics from coal fly-ash and waste glass

Author(s): Bossert J. | Fidancevska E. | Mangutova B. | Panova B. | Milosevski D. | Milosevski M.
Volume: 36
Issue: 2
Year: 2004





Influence of mechanical activation of AL2O3 on synthesis of magnesium aluminate spinel

Author(s): Zhihui Zhang | Nan LI.
Volume: 36
Issue: 2
Year: 2004





Electron paramagnetic resonance in the research of defect formation and thermal processes during grinding of ZnO powders

Author(s): Kakazey M. | Vlasova M. | Dominguez-Patiño M. | Dominguez-Patiño G. | Srećković T. | Nikolić Natalija
Volume: 36
Issue: 2
Year: 2004





Obtaining of dense and highly porous ceramic materials from metallurgical slag

Author(s): Fidancevska E. | Mangutova B. | Milosevski D. | Milosevski M. | Bossert J.
Volume: 35
Issue: 2
Year: 2003





Formation of irregular rings in silica aerogel structure during the sintering process

Author(s): Hinić Ivana I. | Stanišić Goran M. | Popović Zoran V.
Volume: 35
Issue: 2
Year: 2003





Microwave and conventional sintering of premixed and prealloyed Cu-12Sn bronze

Author(s): Sethi G. | Upadhyaya A. | Agrawal D.
Volume: 35
Issue: 2
Year: 2003





Anneal hardening effect in sintered copper alloys

Author(s): Nestorović Svetlana | Milićević Boran | Marković Desimir
Volume: 34
Issue: 2
Year: 2002





Influence of hardening on the microstructure and the wear capacity of gears made of Fe1.5Cr0.2Mo sintered steel

Author(s): Predki W. | Miltenović A.
Volume: 42
Issue: 2
Year: 2010





Effect of porosity and particle size on microwave heating of copper

Author(s): Mondal A. | Shukla A. | Upadhyaya A. | Agrawal D.
Volume: 42
Issue: 2
Year: 2010





Preparation of gradient Ni-SDC anode by tape casting and co-sintering

Author(s): Li X.B. | Wang H.Y. | Gu H.X. | Wang J. | Zhang W.J. | Wang T.G.
Volume: 42
Issue: 2
Year: 2010





Effect of Cu addition and heat treatment self-propagating high temperature synthesis reaction in Al-Ti-C system

Author(s): Li Y.X. | Hu J. D. | Liu Y.H. | Guo Z.X.
Volume: 40
Issue: 2
Year: 2008





Optical properties of GaAs 2D Archimedean photonic lattice tiling with the p4g symmetry

Author(s): Jovanović Đ. | Gajić R. | Hingerl K.
Volume: 40
Issue: 2
Year: 2008





History and challenges of barium titanate: Part I

Author(s): Vijatović M.M. | Bobić J.D. | Stojanović B.D.
Volume: 40
Issue: 2
Year: 2008





Kinetics of CxNy formation on electrode surface using the electrochemical method

Author(s): Chekhovskii A. | Tomila T. | Ragulya A. | Timofeeva I. | Ivanchuk A. | Bykov D. | Labunets T.
Volume: 40
Issue: 2
Year: 2008





Preparation of biomorphic SiC ceramics

Author(s): Egelja A. | Gulicovski J. | Devečerski A. | Ninić M. | Radosavljević-Mihajlović A. | Matović B.
Volume: 40
Issue: 2
Year: 2008





Electrical properties of ZnO varistors prepared by direct mixing of constituent phases

Author(s): Žunić M. | Branković Z. | Branković G.
Volume: 38
Issue: 2
Year: 2006





The influence of high pressure on the properties of natural alumino-silicates

Author(s): Šušić N.
Volume: 34
Issue: 2
Year: 2002





Kinetics of thermal relaxation of cold sintered amorphous powder of 82Ni18P

Author(s): Minić-Popović Dragica M. | Maričić Aleksa M. | Šušić N.
Volume: 34
Issue: 2
Year: 2002





Porosity of silicon carbide ceramics

Author(s): Slutsker A.I. | Betekhtin V.I. | Sinani A.B. | Kadomtsev A.G. | Ordanyan S.S.
Volume: 34
Issue: 2
Year: 2002





Thermodynamics of processes of consolidation of an assembly of dispersed particles and deconsolidation of a polycrystalline body

Author(s): Lisovsky A.F.
Volume: 34
Issue: 2
Year: 2002





Characterization of defects of mullite fibers prepared by polyvinyl butyral as spinning aid

Author(s): Zhang Y.B. | Xiao C.F. | An S.L. | Yang J.F. | Xu S.J.
Volume: 42
Issue: 2
Year: 2010





Solution combustion synthesis and sintering behavior of porous MgAl2O4 powders

Author(s): Bai J.H. | Liu J.C.
Volume: 42
Issue: 2
Year: 2010





Magnetic properties of hexaferrite nanosized powders produced via mechanoactivation

Author(s): Naiden E.P. | Zhuravlyov R.A. | Itin V.I. | Terekhova O.G. | Politov M.V. | Lopushniak Yu.M. | Tcherbakov V.E.
Volume: 37
Issue: 2
Year: 2005





Thermodynamic interpretation of a dihedral angle in composite materials

Author(s): Lisovsky A.F.
Volume: 36
Issue: 2
Year: 2004





High temperature sintering kinetics of a-Al2o3 powder

Author(s): Ivanović M.R. | Nenezić M. | Jokanović Vukoman R.
Volume: 35
Issue: 2
Year: 2003





Intergranular area microalloyed aluminium-silicate ceramics fractal analysis

Author(s): Purenović J. | Mitić V.V. | Kocić Lj. | Pavlović V. | Ranđelović M. | Purenović M.
Volume: 45
Issue: 1
Year: 2013





Pore geometry of ceramic device: The key factor of drug release kinetics

Author(s): Čolović B. | Milivojević D. | Babić-Stojić B. | Jokanović V.
Volume: 45
Issue: 1
Year: 2013





The use of image analysis for determination of surface deterioration level of improved alumina based materials subjected to cavitation

Author(s): Dimitrijević M.M. | Dojčinović M. | Devečerski A. | Jančić-Heinemann R. | Volkov-Husović T.
Volume: 45
Issue: 1
Year: 2013





Methanol electrooxidation on PtRu modified zeolite X

Author(s): Mojović Z. | Mudrinić T. | Rabi-Stanković Abu A. | Ivanović-Šašić A. | Marinović S. | Žunić M. | Jovanović D.
Volume: 45
Issue: 1
Year: 2013





Reducibility study of Rossetta ilmenite ore briquettes and powder with coke breeze at 800-1100°C

Author(s): Abd el Gawad Hala H. | El-Hussiny N.A. | Wassef Marguerite A. | Khalifa M.G. | Soliman Aly A.A. | Shalabi M.E.H
Volume: 45
Issue: 1
Year: 2013





Sol-gel as a method to tailor the magnetic properties of Co1+yAl2-yO4

Author(s): Milivojević D. | Babić-Stojić B. | Jokanović V. | Jagličić Z. | Branković D. | Jović N. | Čolović B. | Čupić S. | Kojić D.
Volume: 45
Issue: 1
Year: 2013





Structural characterization of the nickel thin film deposited by glad technique

Author(s): Potočnik J. | Nenadović M. | Jokić B. | Štrbac S. | Rakočević Z.
Volume: 45
Issue: 1
Year: 2013





The influence of Zn containing components on the synthesis of Z-phase

Author(s): Baltakys M. | Siauciunas R. | Jauberthie R. | Baltakys K.
Volume: 45
Issue: 1
Year: 2013





Transition metals in ZnO nanocrystals: Magnetic and structural properties

Author(s): Kuryliszyn-Kudelska I. | Dobrowolski W. | Arciszewska M. | Romčević N. | Romčević M. | Hadžić B. | Sibera D. | Narkiewicz U. | Lojkowski W.
Volume: 45
Issue: 1
Year: 2013





Research on the influence of manganese content of physical and chemical characteristics iron-based sintered products

Author(s): Ionici C. | Dobrota D.
Volume: 45
Issue: 1
Year: 2013





Optical, structural and electrical properties of nanosized zinc oxide sintered films for photovoltaic applications

Author(s): Kumar V. | Dwivedi D.K. | Agrawal P.
Volume: 45
Issue: 1
Year: 2013





Investigation of sintering in electroceramics by thermodilatometry

Author(s): Trník A. | Moravčíková J. | Keppert M. | Medveď I.
Volume: 45
Issue: 1
Year: 2013





Studying the pelletization of rosseta ilmenite concentrate with coke breeze using molasses and reduction kinetics of produced pellets at 800-1150ºC

Author(s): El-Hussiny N.A. | Shalabi M.E.H.
Volume: 44
Issue: 1
Year: 2012





Formation of magnetic microstructure of the nanosized NiFe2O4 synthesized via solid-state reaction

Author(s): Žák T. | Ćosović V. | Ćosović A. | David B. | Talijan N. | Živković D.
Volume: 44
Issue: 1
Year: 2012





Investigation of porosity and fractal properties of the sintered metal and semiconductor layers in the MDS capacitor structure

Author(s): Skatkov Leonid | Gomozov Valeriy | Bayrachniy Boris
Volume: 44
Issue: 1
Year: 2012





SiC synthesis using natural Mg-silicates

Author(s): Devečerski A. | Pošarac M. | Dimitrijević M. | Rosić M. | Volkov-Husović T. | Branković G.
Volume: 44
Issue: 1
Year: 2012





Mechanical properties and microstructure of Al2O3/TiAl in situ composites doped with Cr and V2O5

Author(s): Zhang Kun | Fen Wang | Zhu Jianfeng | Wu Huae
Volume: 44
Issue: 1
Year: 2012





Synthesis of barium-zinc-titanate ceramics

Author(s): Obradović N. | Nikolić M.V. | Nikolić N. | Filipović S. | Mitrić M. | Pavlović V. | Nikolić P.M. | Đorđević A.R. | Ristić M.M.
Volume: 44
Issue: 1
Year: 2012





Synthesis of TiN-Si3N4 composites from rutile and quartz by carbothermal reduction nitridation

Author(s): Chen Kai | Huang Zhaohui | Fang Minghao | Liu Yan-Gai
Volume: 44
Issue: 1
Year: 2012





Mechanical-chemical synthesis Ba0.77Sr0.23TiO3

Author(s): Kosanović D. | Obradović N. | Živojinović J. | Filipović S. | Maričić A. | Pavlović V. | Tang Y. | Ristić M.M.
Volume: 44
Issue: 1
Year: 2012





Sintered properties and sintering behavior of MgO-ZrO2 composite hydrogel prepared by coprecipitation technique

Author(s): Das Sukhen | Mitra N.K. | Das Sudip
Volume: 44
Issue: 1
Year: 2012





Mechanical properties correlation to processing parameters for advanced alumina based refractories

Author(s): Dimitrijević Marija M. | Veljović Djordje | Posarac-Marković Milica | Jančić-Heinemann Radmila | Volkov-Husović Tatjana | Zrilić Milorad
Volume: 44
Issue: 1
Year: 2012





Laser synthesis of Al2TiO5 and Y3Al5O12 ceramics from powder mixtures Al2O3-TiO2 and Al2O3-Y2O3

Author(s): Vlasova M. | Kakazey M. | Coeto Sosa B. | Aguilar Marquez P.A. | Rosales I. | Martinez Escobar A. | Stetsenko V. | Bykov A. | Ragulya A.
Volume: 44
Issue: 1
Year: 2012





Three-dimensional computer simulation of grain coarsening during sintering

Author(s): Nikolic Zoran S.
Volume: 44
Issue: 1
Year: 2012





Iterative regularity and parent-offspring growth mold of stable grain array in bismuth silicate micro-crystals

Author(s): Zhang Z.G. | Wang X.F. | Tian Q.Q.
Volume: 43
Issue: 1
Year: 2011





Application of ultrasonic pulse velocity technique and image analysis in monitoring of the sintering process

Author(s): Terzić A. | Pavlović Lj. | Mitić V.
Volume: 43
Issue: 1
Year: 2011





Development of new material for the environmental-friendly energy generation processes

Author(s): Ristic S. | Jovicevic A. | Kocic S. | Spasojevic M. | Maricic A.
Volume: 43
Issue: 1
Year: 2011





Analysis and modeling of sintering of Sr-hexaferrite produced by PIM technology

Author(s): Zlatkov B.S. | Nikolic M.V. | Zeljkovic V. | Obradovic N. | Pavlovic V.B. | Aleksic O.
Volume: 43
Issue: 1
Year: 2011





Eco-technological process of glass-ceramic production from galvanic sludge and aluminium slag

Author(s): Stanisavljević M. | Krstić I. | Zec S.
Volume: 42
Issue: 1
Year: 2010





Micro structural control of stabilized Zirconia ceramics (8YSZ) through modified conventional sintering methodologies

Author(s): Rajeswari K. | Reddy Rajasekhar A. | Hareesh U.S. | Saha B.P. | Johnson R.
Volume: 42
Issue: 1
Year: 2010





Sintered materials based on copper and alumina powders synthesized by a novel method

Author(s): Korać Marija | Kamberović Ž. | Anđić Z. | Filipović M. | Tasić M.
Volume: 42
Issue: 1
Year: 2010





Influence of rare-earth additives (La, Sm and Dy) on the microstructure and dielectric properties of doped BaTiO3 ceramics

Author(s): Paunović Vesna | Živković Lj.
Volume: 42
Issue: 1
Year: 2010





Influence of structural transformations on electric and magnetic properties of Fe81B13Si4C2 amorphous alloy

Author(s): Minić D.M. | Plazinić M. | Živanić J. | Maričić A.
Volume: 42
Issue: 1
Year: 2010





Grain orientation distribution and development of grain line in highly ordered Bi4Si3O12 micro-crystals

Author(s): Zhang Z.G. | Wang X.F. | Tian Q.Q.
Volume: 42
Issue: 1
Year: 2010





Computer simulation of rapid solidification with undercooling: A case study of spherical ceramics sample on metallic substrate

Author(s): Nikolic Zoran S. | Yoshimura M.
Volume: 42
Issue: 1
Year: 2010





Design and fabrication of sintered Nd-Fe-B magnets with a low temperature coefficient of intrinsic coercivity

Author(s): Cui X.G. | Yan M. | Ma T.Y. | Luo W. | Tu S.J.
Volume: 41
Issue: 1
Year: 2009





Grain size trends and correlation analysis in highly ordered grain line structure of bismuth silicate (Bi4Si3O12) micro-crystals

Author(s): Zhang Z.G. | Wang X.F. | Tian Q.Q. | Yu C.L.
Volume: 41
Issue: 1
Year: 2009





The effect of Y2O3 addition on thermal shock behavior of magnesium aluminate spinel

Author(s): Pošarac Milica | Devečerski A. | Volkov-Husović T. | Matović B. | Minić D.M.
Volume: 41
Issue: 1
Year: 2009





Characterization of anatase TiO2 nanopowder by variable-temperature Raman spectroscopy

Author(s): Šćepanović Maja J. | Grujić-Brojčin M. | Dohčević-Mitrović Z.D. | Popović Z.V.
Volume: 41
Issue: 1
Year: 2009





Features of formation of composite ceramics from SiC-Si-Mo at high pressure

Author(s): Vlasova M. | Bykov A. | Rosales I. | Kakazey M. | Guardian R.
Volume: 41
Issue: 1
Year: 2009





Quantitative formulation of mechanism of sintering process during creep deformation of refractory concretes

Author(s): Terzić Anja | Pavlović Lj.
Volume: 41
Issue: 1
Year: 2009





Study on high temperature sintering processes of selective laser sintered Al2O3/ZrO2/TiC ceramics

Author(s): Bai P. | Li Y.
Volume: 41
Issue: 1
Year: 2009





Titania powder activation and rutile ceramics structure formation

Author(s): Ziganshin I.R. | Porozova S.E. | Stolina A.E. | Torsunov M.F.
Volume: 41
Issue: 1
Year: 2009





Mechanochemical activation assisted synthesis of bismuth Layered-Perovskite Bi4Ti4O12

Author(s): Lazarević Zorica Ž. | Stojanović B.D. | Romčević M.J. | Romčević N.Ž.
Volume: 41
Issue: 1
Year: 2009





Effect of zircon on sintering, composition and microstructure of magnesia powders

Author(s): Peng C. | Li N. | Han B.
Volume: 41
Issue: 1
Year: 2009





Recent advances in PIM technology I

Author(s): Zlatkov B.S. | Griesmayer E. | Loibl H. | Aleksić O.S. | Danninger H. | Gierl C. | Lukić L.S.
Volume: 40
Issue: 1
Year: 2008





Monitoring of the morphologic reconstruction of deposited ablation products in laser irradiation of silicon

Author(s): Vlasova M. | Aguilar Márquez P.A. | Reséndiz-González M.C. | Kakazey M. | Stetsenko V. | Tomila T. | Ragulya A.
Volume: 40
Issue: 1
Year: 2008





Crystal structure analysis of Nd-doped ceria solid solutions

Author(s): Matović B. | Dukić J. | Devečerski A. | Bošković S. | Ninić M. | Dohčević-Mitrović Z.
Volume: 40
Issue: 1
Year: 2008





Influence of Mn site doping on electrical resistivity of polycrystalline La1-yAyMn1-xBxO3 (A=Ba, Sr; B=Cu, Cr, Co) Manganites

Author(s): Paunović N. | Popović Z.V. | Cantarero A. | Sapina F.
Volume: 40
Issue: 1
Year: 2008





Influence of mechanical activation on elelctrical properties of cordierite ceramics

Author(s): Đorđević N.G. | Jovanić P.B.
Volume: 40
Issue: 1
Year: 2008





New alloying systems for ferrous powder metallurgy precision parts

Author(s): Danninger H. | Gierl C.
Volume: 40
Issue: 1
Year: 2008





Intrinsic resistivity of sintered Nickel Manganite vs. powder activation time and density

Author(s): Savić S.M. | Nikolić M.V. | Aleksić O.S. | Slankamenac M. | Živanov M. | Nikolić P.M.
Volume: 40
Issue: 1
Year: 2008





Synthesis of BaTiO3 from a mechanically activated BaCO3-TiO2 system

Author(s): Pavlović V.P. | Stojanović B.D. | Pavlović V.B. | Marinković-Stanojević Z. | Živković Lj. | Ristić M.M.
Volume: 40
Issue: 1
Year: 2008





Properties of a ceria-based (C6S2G2) solid oxide electrolyte sintered with Al2O3 additive

Author(s): Liu Y.H. | Yin C.Q. | Wang L.H. | Li D.B. | Lian J.S. | Hu J.D. | Guo Z.X.
Volume: 40
Issue: 1
Year: 2008





Liquid phase sintering, I: Computer study of skeletal settling and solid phase extrication in a normal gravity environment

Author(s): Nikolić Z.S.
Volume: 40
Issue: 1
Year: 2008





Hydrothermal treatment of electrochemically synthesized nanocrystalline magnetic iron oxide powder

Author(s): Vulićević Lj. | Ivanović N. | Maričić A. | Srećković M. | Vardić S. | Plazinić M. | Tomić Ž.
Volume: 39
Issue: 1
Year: 2007





Activation energies as the validity criterion of a model for complex reactions that can be in oscillatory states

Author(s): Anić S. | Kostić M. | Ninić M. | Blagojević S. | Kolar-Anić Lj.
Volume: 39
Issue: 1
Year: 2007





Construction of stess-strain curves for brittle materials by indentation in a wide temperature range

Author(s): Milman Yu.V. | Gridneva I.V. | Golubenko A.A.
Volume: 39
Issue: 1
Year: 2007





Influence of mechanical activation on synthesis and properties of the MgO-TiO2 system

Author(s): Petrović Vera V. | Maričić A. | Labus N. | Ristić M.M.
Volume: 39
Issue: 1
Year: 2007





Ceramic electrodes based on Magneli phases of titanium oxides

Author(s): Gusev A.A. | Avvakumov E.G. | Medvedev A.ZH. | Masliy A.I.
Volume: 39
Issue: 1
Year: 2007





Low temperature synthesis of porous silicate ceramics

Author(s): Méndez Enríquez Y. | Vlasova M. | Leon I. | Kakazey M.G. | Dominguez-Patiño M. | Isaeva L. | Tomila T.
Volume: 39
Issue: 1
Year: 2007





Study on densification of laser ignited reaction sintering of Ni-Al-Cu powder

Author(s): Liu Y.H. | Guo Z.X. | Shen P. | Wang H.Y. | Hu J.D.
Volume: 39
Issue: 1
Year: 2007





Dilatometry of ball milled nickel nano powder during non-isothermal sintering

Author(s): Panigrahi B.B. | Das K. | Godkhindi M.M.
Volume: 39
Issue: 1
Year: 2007




