Effects of Al-Mn-Ti-P-Cu master alloy on microstructure and properties of Al-25Si alloy

Author(s): Xu Chunxiang | Zhao Gaozhan | Zhang Jinshan
Volume: 10
Issue: 5
Year: 2013





A study on fast post-processing massive data of casting numerical simulation on personal computers

Author(s): Chen Tao | Liao Dunming | Pang Shenyong
Volume: 10
Issue: 5
Year: 2013





Microstructure and mechanical properties of cast Mg-15Al-xNd alloy by permanent mold

Author(s): Zhou Kangkang | Wang Hongxia | Liang Wei
Volume: 10
Issue: 5
Year: 2013





Low temperature impact toughness and fracture mechanism of cast QT400-18L ductile iron with different Ni additions

Author(s): Zhang Xinning | Qu Yingdong | Yang Hongwang
Volume: 10
Issue: 5
Year: 2013





Effect of growth rate on characteristic lengths of microstructure in directionally solidified

Author(s): Zhang Yuan | Li Xinzhong | Guo Jingjie
Volume: 10
Issue: 5
Year: 2013





Production of A356 aluminum alloy wheels by thixo-forging combined with a low superheat casting process

Author(s): Wang Shuncheng | Cai Chang | Zheng Kaihong
Volume: 10
Issue: 5
Year: 2013





Effects of minor amounts of scandium on microstructure and mechanical properties of ZA27 alloy

Author(s): Xiang Qingchun | Zhang Wei | Wang Ruichun
Volume: 10
Issue: 5
Year: 2013





Microstructure and tensile properties of thixo-diecast AZ91D magnesium alloy

Author(s): Ai Xiulan | Quan Gaofeng | Liu Zhaoming
Volume: 10
Issue: 5
Year: 2013





Microstructural characteristics of in situ Mg2Si/Al-Si composite by low superheat pouring

Author(s): Wu Xiaofeng | Wang Zhe | Zhang Guangan
Volume: 10
Issue: 5
Year: 2013





Microstructure characteristics and mechanical properties of rheocasting 7075 aluminum alloy

Author(s): Yang Bin | Mao Weimin | Song Xiaojun
Volume: 10
Issue: 5
Year: 2013





Study on typical hole defects in AZ91D magnesium alloy prepared by low pressure lost foam casting

Author(s): Li Jiqiang | Zhao zhong | Fan Zitian
Volume: 10
Issue: 4
Year: 2013





Observation and characterization of flow in critical sections of a horizontal pressurized gating system using water models

Author(s): Jaiganesh Venkataramani | Prakasan Kalakkath
Volume: 10
Issue: 4
Year: 2013





Hot cracking susceptibility of AlSi7MgCu alloys and effects of alloying elements magnesium and copper

Author(s): Thomas Pabel1 | Salar Bozorgi | Christian Kneissl
Volume: 10
Issue: 4
Year: 2013





Microstructure evolution of an Mg-Zn-Nd-Zr magnesium alloy during recrystallization and partial remelting process

Author(s): Tao Jianquan | Wan Yuanyuan | Sun Changjian
Volume: 10
Issue: 4
Year: 2013





Feature study of body-fitted Cartesian grids used in casting numerical simulation

Author(s): Li Ri | Wang Bin | Xiong Shoumei
Volume: 10
Issue: 4
Year: 2013





Modeling and analysis of porosity and compressive strength of gradient Al2O3-ZrO2 ceramic filter using BP neural network

Author(s): Li Qiang | Zhang Fengfeng | Yu Jingyuan
Volume: 10
Issue: 4
Year: 2013





Evolution of rheocast microstructure of AZ31 alloy in semisolid state

Author(s): Xing Bo | Li Yuandong | Ma Ying
Volume: 10
Issue: 4
Year: 2013





Effect of inter-critical quenching on mechanical properties of casting low-alloy steel

Author(s): Liu Zhongli | Shang Yong
Volume: 10
Issue: 4
Year: 2013





Effect of ultrasonic treatment and Sr addition on microstructure of Al-20%Si alloy

Author(s): Miao Long | Lu Yiping | Zhang Yubo
Volume: 10
Issue: 4
Year: 2013





Investigation on corrosion behaviour of as-extruded near eutectic Al-Si-Mg alloy by neutral salt spray test

Author(s): Wu Yuna | Liao Hengcheng | Yang Jian
Volume: 10
Issue: 4
Year: 2013





Prediction of mechanical properties of Al alloys with change of cooling rate

Author(s): Quan-Zhi Dong | Young-Sim Choi | Jun-Ho Hong
Volume: 9
Issue: 4
Year: 2012





Diagnosis parameters of mold filling pattern for optimization of a casting system

Author(s): Jun-Ho Hong | Young-Sim Choi | Ho-Young Hwang
Volume: 9
Issue: 4
Year: 2012





Structure modification and constant remelting speed control of a 120-t three-phase electroslag furnace

Author(s): Wang Changzhou | Song Jinchun
Volume: 9
Issue: 4
Year: 2012





Physical modeling of spent-nuclear-fuel container

Author(s): Wang Liping | Guo Erjun | Jiang Wenyong
Volume: 9
Issue: 4
Year: 2012





Research on lamellar structure and micro-hardness of directionally solidified Sn-58Bi eutectic alloy

Author(s): Hu Xiaowu | Li Ke | Ai Fanrong
Volume: 9
Issue: 4
Year: 2012





Optimization of a new animal glue binder system cured by CO2 for use in foundry

Author(s): Liu Weihua | Zhang Yilin | Li Yingmin
Volume: 9
Issue: 4
Year: 2012





Effect of Mn on microstructures and mechanical properties of Al-Mg-Si-Cu-Cr-V alloy

Author(s): Zhao Zhihao | Meng Yi | Cui Jianzhong
Volume: 9
Issue: 4
Year: 2012





Effect of yttrium on microstructure and mold filling capacity of a near-α high temperature titanium alloy

Author(s): Zhao Ertuan | Chen Yuyong | Kong Fantao
Volume: 9
Issue: 4
Year: 2012





Preparation and properties of gradient Al2O3-ZrO2 ceramic foam by centrifugal slip casting method

Author(s): Li Qiang | Yu Jingyuan | Tang Ji
Volume: 9
Issue: 4
Year: 2012





Microstructure characteristics and solidification behavior of wrought aluminum alloy 2024 rheo-diecast with self-inoculation method

Author(s): Li Yanlei | Li Yuandong | Li Chun
Volume: 9
Issue: 4
Year: 2012





Effect of aluminum silicate fiber modification on crack-resistance of a ceramic mould

Author(s): Lu Dehong | Wang Zhao | Jiang Yehua
Volume: 9
Issue: 4
Year: 2012





Effect of Mn on hardenability of 25CrMo axle steel by an improved end-quench test

Author(s): Zhang Yutuo | Bian Shu | Han Weixin
Volume: 9
Issue: 4
Year: 2012





Effect of tempering temperature on microstructure and mechanical properties of high boron white cast iron

Author(s): Liu Zhongli | Li Yanxiang | Chen Xiang
Volume: 9
Issue: 4
Year: 2012





Study of Ce-modified antibacterial 316L stainless steel

Author(s): Yuan Junping | Li Wei
Volume: 9
Issue: 4
Year: 2012





Development and application of titanium alloy casting technology in China

Author(s): HAN Hai | XIE Cheng-mu | ZHAO Jia-qi
Volume: 2
Issue: 4
Year: 2005





Development of rheometer for semi-solid highmelting point alloys

Author(s): LIU Wen | XING Shu-min | ZHANG Lin
Volume: 2
Issue: 4
Year: 2005





Research on the squeeze cast technology of the castings with large ratio of height to thickness

Author(s): LI Chen-xi | SAN Jing-chao | XU Na
Volume: 2
Issue: 4
Year: 2005





Study on the microstructure and mechanical properties of medium carbon Cr-Si-Mn-Mo-V steel for cast inserted dies

Author(s): LIU Jin-hai | LI Guo-lu | HAO Xiao-yan
Volume: 2
Issue: 4
Year: 2005





Study on the serialization and applications of low carbon ductile iron

Author(s): SHU Xin-fu | SHU Rui | CHANG Dian-cun
Volume: 2
Issue: 4
Year: 2005





Assessment of modification level of hypoeutectic Al -Si alloys by pattern recognition of cooling curves

Author(s): CHEN Xiang
Volume: 2
Issue: 4
Year: 2005





Analysis of reasons causing riser feeding failure in nodular iron castings production

Author(s): ZHOU Gen
Volume: 2
Issue: 4
Year: 2005





Effect of mould material on aluminum alloy ingot quality under low frequency electromagnetic casting

Author(s): LI Jian-chao | CUI Jian-zhong | WANG Bao-feng
Volume: 3
Issue: 4
Year: 2006





Optimizing hardenability of high chromium white cast iron

Author(s): SU Ying-long | LI Dan | ZHANG Xue-kun
Volume: 3
Issue: 4
Year: 2006





Glass matrix composite material prepared with waste foundry sand

Author(s): ZHANG Zhao-shu | XIA Ju-pei | ZHU Xiao-qin
Volume: 3
Issue: 4
Year: 2006





Variation of hydrogen level in magnesium alloy melt

Author(s): XU Si-xiang | WU Shu-sen | MAO You-wu
Volume: 3
Issue: 4
Year: 2006





Microstructure and properties of Mg-Al binary alloys

Author(s): ZHENG Wei-chao | LI Shuang-shou | TANG Bin
Volume: 3
Issue: 4
Year: 2006





Unique microstructure and excellent mechanical properties of ADI

Author(s): Jincheng Liu
Volume: 3
Issue: 4
Year: 2006





Study on Public Service Platform for Castings and Forgings in Tiexi equipment manufacturing industrial cluster area, Shenyang city

Author(s): Dong Feng
Volume: 4
Issue: 4
Year: 2007





The forty years of vermicular graphite cast iron development in China (Part Ⅲ)

Author(s): QIU han-quan | CHEN Zheng-de
Volume: 4
Issue: 4
Year: 2007





Analysis of precipitation in a Cu-Cr-Zr alloy

Author(s): Zhao Mei | Lin Guobiao | Wang Zidong
Volume: 5
Issue: 4
Year: 2008





Phase field modeling of multiple dendrite growth of Al-Si binary alloy under isothermal solidifi cation

Author(s): Sun Qiang | Zhang Yutuo | Cui Haixia
Volume: 5
Issue: 4
Year: 2008





Sharing casting technological data on web site

Author(s): Sun Xun | Li Hailan | Wang Junqing
Volume: 5
Issue: 4
Year: 2008





Based on database and asp.net technologies, a web platform of scientific data in the casting forces on the mold-fi lling behavior of titanium melts in vertically rotating molds

Author(s): Xu Daming | Jia Limin | Fu Hengzhi
Volume: 5
Issue: 4
Year: 2008





Research on depositing Ni45 alloy on titanium alloy surface by electrospark deposition

Author(s): You Tao | Zhang Chunhui | Su Guiqiao
Volume: 5
Issue: 4
Year: 2008





Preparation of big size open-cell aluminum foam board using infiltration casting

Author(s): Wang Lucai | Chen Yuyong | Wang Fang
Volume: 5
Issue: 4
Year: 2008





Microstructural evolution of equal channel angular pressed AZ91D magnesium alloy during semi-solid isothermal heat treatment

Author(s): Chen Tijun | Lu Guoxiang | Hao Yuan
Volume: 5
Issue: 4
Year: 2008





Effect of hafnium addition on solidifi cation structure of cast Ti-46Al alloys

Author(s): Su Yanqing | Zhang Li | Guo Jingjie
Volume: 5
Issue: 4
Year: 2008





Microstructure evolution of directionally solidifi ed Sn-16%Sb hyperperitectic alloy

Author(s): Hu Xiaowu | Li Shuangming | Liu Lin
Volume: 5
Issue: 4
Year: 2008





Influence of titanium content on wear resistance of electrolytic low-titanium eutectic Al-Si piston alloys

Author(s): Wang Jiefang | Xie Jingpei | Yan Shuqing
Volume: 5
Issue: 4
Year: 2008





Production technique of vermicular graphite iron cylinder head of vehicle diesel engine

Author(s): Zhou Gen | Liu Wanhua
Volume: 5
Issue: 4
Year: 2008





Improvement of die life in high speed injection die casting

Author(s): Yasuhiro Arisuda | Akihito Hasuno | Junji Yoshida
Volume: 5
Issue: 4
Year: 2008





Reduced energy consumption by using streamlined gating systems

Author(s): Soen Skov-Hansen | Niels Skat Tiedje
Volume: 5
Issue: 4
Year: 2008





Colour Metallography of Cast Iron - Chapter 2: Grey Iron (Ⅲ)

Author(s): Zhou Jiyang
Volume: 6
Issue: 4
Year: 2009





Emerging melt quality control solution technologies for aluminium melt

Author(s): Arturo Pascual, Jr
Volume: 6
Issue: 4
Year: 2009





Complex (Mn, X)S compounds - major sites for graphite nucleation in grey cast iron

Author(s): Iulian Riposan | Mihai Chisamera | Stelian Stan
Volume: 6
Issue: 4
Year: 2009





Solution strengthened ferritic ductile iron ISO 1083/JS/500-10 provides superior consistent properties in hydraulic rotators

Author(s): Dr. Richard Larker
Volume: 6
Issue: 4
Year: 2009





Substitute materials of furfuryl alcohol in furan resin used for foundry and their technical properties

Author(s): Ren Yuyan | Li Yingmin
Volume: 6
Issue: 4
Year: 2009





Effects of harmonic electric field frequency on electromagnetic and flow fields of Ti-Al melt in a rectangular mold based on numerical simulation

Author(s): Ding Hongsheng | Zhang Yong | Jiang Sanyong
Volume: 7
Issue: 4
Year: 2010





Numerical simulation of interfacial reaction between titanium and zirconia

Author(s): Liu Aihui | Li Bangsheng | Sui Yanwei
Volume: 7
Issue: 4
Year: 2010





Numerical simulation of mould filling process for pressure plate and valve handle in LFC

Author(s): Jiang Junxia | Li Qinliang | Wu Zhichao
Volume: 7
Issue: 4
Year: 2010





Effects of yttrium on microstructure and mechanical properties of Mg-6Al magnesium alloy

Author(s): Ren Wenliang | Li Quan'an | Li Jianhong
Volume: 7
Issue: 4
Year: 2010





Effect of V and Nb additions on microstructure, properties, and deformability of Ti-45Al-9 (V, Nb, Y) alloy

Author(s): Yang Fei | Kong Fantao | Chen Yuyong
Volume: 7
Issue: 4
Year: 2010





Effect of carbon additions on the microstructure of a single crystal Ni-based superalloy AM3

Author(s): Yu Zhuhuan | Liu Lin | Zhao Xinbao
Volume: 7
Issue: 4
Year: 2010





New filling system design for bolster casting and computer simulation

Author(s): Zhang Yutuo | Li Guimao | Zhang Wanning
Volume: 7
Issue: 4
Year: 2010





Fabrication of quaternary Mg-Zn-Y-Ce quasi-crystal alloys and their strengthening effects on AZ91 magnesium alloys

Author(s): Wang Zhifeng | Zhao Weimin | Li Haipeng
Volume: 7
Issue: 4
Year: 2010





Rapid preparation of ceramic moulds for medium-sized superalloy castings with magnesia-phosphate-bonded bauxite-mullite investments

Author(s): Li Tingzhong | Luo Jirong | Wu Shusen
Volume: 7
Issue: 4
Year: 2010





Microstructural evolution of fine-grained ZA27 alloy during partial remelting

Author(s): Chen Tijun | Fu Mingfeng | Hao Yuan
Volume: 7
Issue: 4
Year: 2010





Effects of strontium and boron interactions in Al-7Si alloys

Author(s): Chen Xiang | Li Yanxiang
Volume: 7
Issue: 4
Year: 2010





Colour Metallography of Cast Iron - Chapter 3: Spheroidal Graphite Cast Iron (Ⅳ)

Author(s): Zhou Jiyang
Volume: 7
Issue: 4
Year: 2010





Advanced casting technologies for lightweight automotive applications

Author(s): Alan A. Luo | Anil K. Sachdev | Bob R. Powell
Volume: 7
Issue: 4
Year: 2010





Structural and thermophysical properties characterization of continuously reinforced cast Al matrix composite

Author(s): Brian Gordon | Natalia Sobczak | Malorzata Warmuzek
Volume: 7
Issue: 4
Year: 2010





Oil quenched malleable iron, the strength of an old material in a “green cast” development and a new future

Author(s): Cornelis J. van Ettinger
Volume: 7
Issue: 4
Year: 2010





Investigation of improving wear performance of hypereutectic 15%Cr-2%Mo white irons

Author(s): R. Reda | A. Nofal | Kh. Ibrahim
Volume: 7
Issue: 4
Year: 2010





The mystery of molten metal

Author(s): Natalia Sobczak | Jerzy Sobczak | Rajiv Asthana
Volume: 7
Issue: 4
Year: 2010





Reduction of greensand emissions by minimum 25% ― Case study

Author(s): Cornelis Grefhorst | Wim Senden | Resat Ilman
Volume: 7
Issue: 4
Year: 2010





What do we do next; To survive, grow and be distinguished

Author(s): Yaylali Günay
Volume: 7
Issue: 4
Year: 2010





Application of ceramic short fiber reinforced Al alloy matrix composite on piston for internal combustion engines

Author(s): Wu Shenqing | Li Jun
Volume: 7
Issue: 4
Year: 2010





Effects of filter materials on microstructure and mechanical properties of AZ91

Author(s): Wu Guohua | Sun Ming | Dai Jichun
Volume: 7
Issue: 4
Year: 2010





Energy conservation and emissions reduction strategies in foundry industry

Author(s): Li Yuanyuan | Chen Weiping | Huang Dan
Volume: 7
Issue: 4
Year: 2010





Advanced manufacturing technologies of large martensitic stainless steel castings with ultra low carbon and high cleanliness

Author(s): Lou Yanchun | Zhang Zhongqiu
Volume: 7
Issue: 4
Year: 2010





Pressurization control system for low pressure crucible casting

Author(s): Li Qiang | Hao Qitang | Jie Wanqi
Volume: 8
Issue: 4
Year: 2011





Microstructure and mechanical properties of TiAl castings produced by zirconia ceramic mould

Author(s): Chen Yanfei | Xiao Shulong | Tian Jing
Volume: 8
Issue: 4
Year: 2011





Recent developments of InteCAST software and its applications on special castings

Author(s): Jianxin ZHOU | Ruixiang LIU | Liliang CHEN
Volume: 2
Issue: 3
Year: 2005





Temperature field in the hot-top during casting a new super-high strength Al-Zn-Mg-Cu alloy by low frequency electromagnetic process

Author(s): Yubo ZUO | Jianzhong CUI | Feiyue QUAN
Volume: 2
Issue: 3
Year: 2005





Directional solidification of metal-gas eutectic and fabrication of regular porous metals

Author(s): Yuan LIU | Huawei ZHANG | Xiang CHEN
Volume: 2
Issue: 3
Year: 2005





Study on the property of AI-Sn-Pb and its bush material clad with steel strip by liquid-solid bond rolling

Author(s): Guangming XU | Baomian LI | Jianzhong CUI
Volume: 2
Issue: 3
Year: 2005





Influence of microwave irradiation on the preparation of novolacs for the shell process

Author(s): Chun XIA | Yuancai LI
Volume: 2
Issue: 3
Year: 2005





Corrosive-wear resistance of stainless steels for the impeller of slurry pump used in zinc hydrometallurgy process

Author(s): Ping LI | Qizhou CAI | Bokang WEI
Volume: 2
Issue: 3
Year: 2005





Application of 3-D numerical simulation software SRIFCAST to produce ductile iron castings

Author(s): Junqing WANG | Xun SUN | Shifang SU
Volume: 2
Issue: 3
Year: 2005





Effect of electric current on the cast microstructure of Al-Si alloy

Author(s): Guangming XU, Jiawei ZHENG, Yong LIU, Jianzhong CUI
Volume: 2
Issue: 3
Year: 2005





Effects of displacement boundary conditions on thermal deformation in thermal stress problems

Author(s): S. Y. Kwak | C. H. Lim | J. H. Nam
Volume: 10
Issue: 3
Year: 2013





Criteria for an advanced assessment of quality of moulding sands with organic binders and reclamation process products

Author(s): R. Dańko
Volume: 10
Issue: 3
Year: 2013





Semi-solid A356 alloy slurry for rheocasting prepared by a new process

Author(s): Liu Zheng | Liu Xiaomei | Mao Weimin
Volume: 10
Issue: 3
Year: 2013





Effect of withdrawal rate on microstructure of a hypoeutectic Al-Si alloy by low superheat DC casting

Author(s): Zhao Dazhi | Liu Fang | Yu Fuxiao
Volume: 10
Issue: 3
Year: 2013





2-D boundary-fitted coordinate grid generation for casting with complex shape

Author(s): Wang Ye | Wu Shiping | Xue Xiang
Volume: 10
Issue: 3
Year: 2013





Influence of high magnetic field on as-cast structure of Cu-25wt.%Ag alloys

Author(s): Li Guimao | Liu Yan | Su Yan
Volume: 10
Issue: 3
Year: 2013





Microstructure and mechanical properties of a new type of austempered boron alloyed high silicon cast steel

Author(s): Chen Xiang | Li Yanxiang
Volume: 10
Issue: 3
Year: 2013





Combined effects of ultrasonic vibration and manganese on Fe-containing inter-metallic compounds and mechanical properties of Al-17Si alloy with 3wt.%Fe

Author(s): Lin Chong | Wu Shusen | Zeng Jinbiao
Volume: 10
Issue: 3
Year: 2013





Effect of shrinkage porosity on mechanical properties of ferritic ductile iron

Author(s): Wang Zehua | Zhao Weihua | Zhou Zehua
Volume: 10
Issue: 3
Year: 2013





Study on dry friction and wear resistance of a WC-Co particle reinforced iron matrix composite material

Author(s): Zhang Peng | Zeng Shaolian | Zhang Zhiguo
Volume: 10
Issue: 3
Year: 2013





Microstructure and properties of M g-Li-A lalloys with Mn addition

Author(s): Li Hong-bin | Yang Guang-chun | Liang Chun-lin
Volume: 3
Issue: 3
Year: 2006





Dynam ic electrom agnetic separation of iron-rich phase inclusions from A lalloy

Author(s): Yu Hai-jun
Volume: 3
Issue: 3
Year: 2006





Vacuum-sealed casting process under pressure

Author(s): Li Chen-xi | Guo Tai-ming | Wu Chun-jing
Volume: 3
Issue: 3
Year: 2006





Electrolytic surface hardening of steel,castiron and aluminium-bronze

Author(s): Suhas Keshav Paknik a r
Volume: 3
Issue: 3
Year: 2006





Material and technique of S i-Mo heatresistant vermicular iron exhaust manifold

Author(s): Jin Yong-xi
Volume: 3
Issue: 3
Year: 2006





Discussion on "proportional solidification technology" fornodulariron casting method

Author(s): ZHOU Ge n
Volume: 3
Issue: 3
Year: 2006





Development of high performance casting analysis software by coupled parallel computation

Author(s): Sang Hyun CHO | Jeong Kil CHOI
Volume: 4
Issue: 3
Year: 2007





Effects of carbon content and solidification rate on thermal conductivity of grey cast iron

Author(s): Daniel Holmgren | Attila Dioszegi | Ingvar L. Svensson
Volume: 4
Issue: 3
Year: 2007





Derivation and application of time step model in solidification process simulation

Author(s): GONG Wen-bang | CHEN Li-liang | LIU Rui-xiang
Volume: 4
Issue: 3
Year: 2007





Aluminum-zinc alloy squeeze casting technological parameters optimization based on PSO and ANN

Author(s): SHU Fu-hua
Volume: 4
Issue: 3
Year: 2007





Effect of electromagnetic stirring on solidification structure of austenitic stainless steel in horizontal continuous casting

Author(s): ZHOU Shu-cai | LI Hua-ji | RAO Jin-song
Volume: 4
Issue: 3
Year: 2007





Plastic deformation wear in modified medium manganese steel

Author(s): YUAN Hai-lun | XIE Jing-pei
Volume: 4
Issue: 3
Year: 2007





Process on cold crucible electromagnetic casting for titanium alloy

Author(s): CHEN Rui-run | DING Hong-sheng | GUO Jing-jie
Volume: 4
Issue: 3
Year: 2007





Semi-solid slurry of AZ91 magnesium alloy prepared by electromagnetic stirring near liquidus temperature

Author(s): ZHANG Xiao-li | TENG Hai-tao | LI Ting-ju
Volume: 4
Issue: 3
Year: 2007





The forty years of vermicular graphite cast iron development in China (Part 2)

Author(s): QIU Han-quan | CHEN Zheng-de
Volume: 4
Issue: 3
Year: 2007





The present and future status of Japanese foundry industry

Author(s): Kanetake NAKATANI
Volume: 5
Issue: 3
Year: 2008





Analysis of bell materials: Tin bronzes

Author(s): Jaromir Audy | Katarina Audy
Volume: 5
Issue: 3
Year: 2008





Preparation of Al/Si functionally graded materials using ultrasonic separation method

Author(s): Zhang Zhongtao | Li Tingju | Yue Hongyun
Volume: 5
Issue: 3
Year: 2008





Prevention of burn-on defect on surface of hydroturbine blade casting of ultra-low-carbon refining stainless steel

Author(s): Li Ling | Xie Huasheng | Huang Danzhong
Volume: 5
Issue: 3
Year: 2008





Study and practice of decreasing residual stress with residual heat of casting

Author(s): Tong Siyi | Liu Lin
Volume: 5
Issue: 3
Year: 2008





Numerical simulation and process optimization for producing large-sized castings

Author(s): Wang Junqing | Sun Xun | Guan Yang
Volume: 5
Issue: 3
Year: 2008





Numerical simulation and analysis of mould filling process in lost foam casting

Author(s): Jiang Junxia | Wu Zhichao | Chen Liliang
Volume: 5
Issue: 3
Year: 2008





Defects in aluminum foam with superfi ne open-cell structure

Author(s): Wang Fang | Zhang Zhimin | Li Baocheng
Volume: 5
Issue: 3
Year: 2008





Colour Metallography of Cast Iron - Chapter 2: Grey Iron (Ⅱ)

Author(s): Zhou Jiyang
Volume: 6
Issue: 3
Year: 2009





The significance of total carbon in greensand systems

Author(s): Alexander Brown
Volume: 6
Issue: 3
Year: 2009





Compacted graphite iron – A material solution for modern diesel engine cylinder blocks and heads

Author(s): Dr. Steve Dawson
Volume: 6
Issue: 3
Year: 2009





Novel methodology for casting process optimization using Gaussian process regression and genetic algorithm

Author(s): Yao Weixiong | Yang Yi | Zeng Bin
Volume: 6
Issue: 3
Year: 2009





Effect of strontium and solidifi cation rate on eutectic grain structure in an Al-13 wt% Si alloy

Author(s): Liao Hengcheng | Bi Juanjuan | Zhang Min
Volume: 6
Issue: 3
Year: 2009





Numerical simulation of stress fi eld in inclusions of large rudder arm steel castings

Author(s): Yang Dixin | Xie Jingpei | Zhang Kefeng
Volume: 6
Issue: 3
Year: 2009





Effect of minor Sc and Zr addition on grain refi nement of as-cast Al-Zn-Mg-Cu alloys

Author(s): He Yongdong | Zhang Xinming | Cao Zhiqiang
Volume: 6
Issue: 3
Year: 2009





Solute redistribution and Rayleigh number in the mushy zone during directional solidifi cation of Inconel 718

Author(s): Wang Ling | Dong Jianxin | Liu Lin
Volume: 6
Issue: 3
Year: 2009





Simulation research on control algorithm of differential pressure casting process

Author(s): Chai Yan | Jie Wanqi | Yang Bo
Volume: 6
Issue: 3
Year: 2009





Effect of nitrogen addition on microstructure and erosion-corrosion behavior of stainless steel in acidic slurry

Author(s): Li Ping | Cai Qizhou | Wei Bo kang
Volume: 6
Issue: 3
Year: 2009





Properties of sodium silicate bonded sand hardened by microwave heating

Author(s): Wang Jina | Fan Zitian | Zan Xiaolei
Volume: 6
Issue: 3
Year: 2009





In-situ SEM observation on fracture behavior of austempered silicon alloyed steel

Author(s): Chen Xiang | Vuorinen Esa | Grahn Jonny
Volume: 6
Issue: 3
Year: 2009





Colour Metallography of Cast Iron - Chapter 3: Spheroidal Graphite Cast Iron (Ⅲ)

Author(s): Zhou Jiyang
Volume: 7
Issue: 3
Year: 2010





Measurement of heat treatment induced residual stresses by using ESPI combined with hole-drilling method

Author(s): Jie Cheng | Si-Young Kwak | Ho-Young Hwang
Volume: 7
Issue: 3
Year: 2010





Cast bulk glassy alloys: fabrication, alloy development and properties

Author(s): Qingsheng Zhang | Chunling Qin | Akihisa Inoue
Volume: 7
Issue: 3
Year: 2010





Effects of beryllium and iron additions on iron-bearing phase in A357 aluminum alloys

Author(s): Chen Zhongwei | Zhang Haifang | Zhang Ruijie
Volume: 7
Issue: 3
Year: 2010





Gypsum bonded investment for micro-structure casting of ZnAl4

Author(s): Yang Chuang | Li Bangsheng | Ren Mingxing
Volume: 7
Issue: 3
Year: 2010





Effect of γ' formation and strengthening elements on microstructures and stress rupture property of single crystal super-alloys

Author(s): Liu Lirong | Chen Haijun | Jin Tao
Volume: 7
Issue: 3
Year: 2010





Study on traveling magnetic field casting of sheet components

Author(s): Su Yanqing | Xu Yanjin | Zhao Lei
Volume: 7
Issue: 3
Year: 2010





Numerical simulation of boundary heat flow effects on directional solidification microstructure of a binary alloy

Author(s): Xue Xiang | Tang Jinjun
Volume: 7
Issue: 3
Year: 2010





Effects of La2(CO3)3 on microstructure and mechanical properties of ZM-5 magnesium alloy

Author(s): Liu Chuang | Li Yusheng | Ma Zhiyi
Volume: 7
Issue: 3
Year: 2010





Numerical simulation of electro-magnetic and flow fields of TiAl melt under electric field

Author(s): Zhang Yong | Ding Hongsheng | Jiang Sanyong
Volume: 7
Issue: 3
Year: 2010





Effect of Sb on the grain refinement and tensile properties of Mg-10Zn-5Al alloys

Author(s): Zhang Zhaoguang | Zhang Jinshan | Liu Yali
Volume: 7
Issue: 3
Year: 2010





Research on cracking mechanism of the thin shell mould in expendable pattern shell casting during pattern removal process

Author(s): Jiang Wenming | Fan Zitian | Liao Defeng
Volume: 7
Issue: 3
Year: 2010





A novel technique for making open-cell Al2O3-ZrO2 ceramic foam with plant seed template

Author(s): Yu Jingyuan | Li Qiang | Tang Ji
Volume: 7
Issue: 3
Year: 2010





Effect of solidification parameters on the microstructures of a single crystal Ni-based superalloy AM3

Author(s): Yu Zhuhuan | Liu Lin | Zhao Xinbao
Volume: 7
Issue: 3
Year: 2010





Numerical microstructure prediction for an aluminium casting and its experimental validation

Author(s): Unterreiter Guenter | Ludwig Andreas | Wu Menghuai
Volume: 8
Issue: 3
Year: 2011





Effect of shot peening process on fatigue behavior of an alloyed austempered ductile iron

Author(s): Amir Sadighzadeh Benam | Sasan Yazdani | Behzad Avishan
Volume: 8
Issue: 3
Year: 2011





Further study on heredity of liquid aluminum modified by electric pulse

Author(s): Qi Jingang | Zhao Zuofu | Dai Shan
Volume: 8
Issue: 3
Year: 2011





A CFD study on optimal venting volume and air flow distribution in a special designed hood system for controlling dust flow

Author(s): Song Gaoju | Yang Lei | Shen Henggen
Volume: 8
Issue: 3
Year: 2011





Phase field modeling of dendritic coarsening during isothermal

Author(s): Zhang Yutuo | Zhang Wanning | Wang Tie
Volume: 8
Issue: 3
Year: 2011





Effect of Mg-Zn-Nd spherical quasi-crystals on microstructure and mechanical properties of ZK60 alloy

Author(s): Zhang Jinshan | Wang Xing | Zhang Zhaoguang
Volume: 8
Issue: 3
Year: 2011





A real-time measuring technology for studying distortion of hydraulic turbine blade castings during heat treatment process

Author(s): Yu Hailiang | Kang Jinwu | Nie Gang
Volume: 8
Issue: 3
Year: 2011





Influence of fading on characteristics of thermal analysis curve of compacted graphite iron

Author(s): Liu Jinhai | Yi Litao | Li Guolu
Volume: 8
Issue: 3
Year: 2011





Solidification microstructure of M2 high speed steel by different casting technologies

Author(s): Zhou Xuefeng | Fang Feng | Jiang Jianjing
Volume: 8
Issue: 3
Year: 2011





Predicting model on ultimate compressive strength of Al2O3-ZrO2 ceramic foam filter based on BP neural network

Author(s): Yu Jingyuan | Li Qiang | Tang Ji
Volume: 8
Issue: 3
Year: 2011





On ignition point of Mg-Ca alloy under nitrogen atmosphere

Author(s): Tan Dunqiang | Yang Xiaoxia | Zhan Yijie
Volume: 8
Issue: 3
Year: 2011





Numerical study of crucial parameters in tilt casting for titanium aluminides

Author(s): Hong Wang | G. Djambazov | K. A. Pericleous
Volume: 8
Issue: 3
Year: 2011





Aging behavior of nano-SiCp reinforced AZ61 magnesium matrix composites

Author(s): Yan Hong | Hu Xiaowu | Nie Qiao
Volume: 8
Issue: 3
Year: 2011





Microstructural evolution of direct chill cast Al-15.5Si-4Cu-1Mg-1Ni-0.5Cr alloy during solution treatment

Author(s): He Kezhun | Yu Fuxiao | Zhao Dazhi
Volume: 8
Issue: 3
Year: 2011





Microstructural evolution and corrosion behavior of directionally solidified FeCoNiCrAl high entropy alloy

Author(s): Cui Hongbao | Wang Ying | Wang Jinyong
Volume: 8
Issue: 3
Year: 2011





Colour Metallography of Cast Iron - Chapter 5: White Cast Iron (Ⅰ)

Author(s): Zhou Jiyang
Volume: 8
Issue: 3
Year: 2011





Numerical simulation for mold-filling of thin-walled aluminum alloy castings in traveling magnetic field

Author(s): Shiping WU | Bangsheng LI | Jingjie GUO
Volume: 1
Issue: 2
Year: 2004





Impact toughness and fracture toughness of austempered ductile iron

Author(s): Jingcheng LIU | Guoxiong SUN
Volume: 1
Issue: 2
Year: 2004





Discussion on compact mechanism of air-stream and synchro-formed clamp plate impact molding

Author(s): Zhenling WANG | Yuqiao XU
Volume: 1
Issue: 2
Year: 2004





Effect of manganese on the ferrum phases of B319 aluminum alloy in lost foam casting

Author(s): Guohua WU | Min XIE | Min XIE
Volume: 1
Issue: 2
Year: 2004





Investigating on casting mold (or core) making with coated sand by the selected laser sintering

Author(s): Zitian FAN | Naiyu HLJANG | Yan LI
Volume: 1
Issue: 2
Year: 2004





Rapid precision casting for complex thin-walled aluminum alloy parts

Author(s): Xuanpu DONG | Naiyu HUANG | Zitian FAN
Volume: 1
Issue: 2
Year: 2004





Study on preparation of fast curing novolaks for the shell process

Author(s): Rongqi LI | Yuancai LI | Haoran ZHANG
Volume: 1
Issue: 2
Year: 2004





An innovative tester system for measuring mechanical property of foundry molding sand

Author(s): Zuxi XIE | Qingchun XIANG | Xu WANG
Volume: 1
Issue: 2
Year: 2004





Analysis of segregation solute redistribution and centerline in continuously cast thin slab

Author(s): Changwen MA | Houfa SHEN | Tianyou HUANG
Volume: 1
Issue: 2
Year: 2004





Effect of partial remelting time on the initial carbide in semisolid structure of hypereutectic hih Cr cast iron

Author(s): Zhifu HUANG | Jiandong XING | Wei HE
Volume: 1
Issue: 2
Year: 2004





Fe-WC surface composites produced by reactive cast-infiltration

Author(s): Daxin ZENG | Janyong LIU | Yuanhao ZHANG
Volume: 1
Issue: 2
Year: 2004





Quality assessment of aluminum-based grain refining master alloys

Author(s): Peijie LI | E. G. Kandalova | V. I. Nikitin
Volume: 2
Issue: 2
Year: 2005





Formation of hypereutectic silicon particles in hypoeutectic Al-Si alloys under the influence of high-intensity ultrasonic vibration

Author(s): Xiaogang Jian | Qingyou Han
Volume: 10
Issue: 2
Year: 2013





Removal of primary iron rich phase from aluminum-silicon melt by centrifugal separation

Author(s): Seong Woo Kim | Un Ho Im | Hyeong Cheol Cha
Volume: 10
Issue: 2
Year: 2013





Effects of Ce concentrations on ignition temperature and surface tension of Mg-9wt.%Al alloy

Author(s): Deng Zhenghua | Li Huaji | Zhao Wanjun
Volume: 10
Issue: 2
Year: 2013





Influences of different degassing processes on refining effect and properties of 4004 Al alloy

Author(s): Wang Liping | Cao Guojian | Guo Erjun
Volume: 10
Issue: 2
Year: 2013





Spheroidization behavior of dendritic b.c.c. phase in Zr-based モ-phase composite

Author(s): Sun Guoyuan | Li Ping | Chen Wei
Volume: 10
Issue: 2
Year: 2013





Numerical simulation of flow and heat transfer of continous cast steel slab under traveling magnetic field

Author(s): Gong Haijun | Li Xinzhong | Fan Xueyi
Volume: 10
Issue: 2
Year: 2013





Numerical simulation on gradient cooling behavior of jumbo slab ingot

Author(s): Lü Nan | Jin Yonglong | Li Shengli
Volume: 10
Issue: 2
Year: 2013





Techniques for improving computational speed in numerical simulation of casting thermal stress based on finite difference method

Author(s): Xue Xiang | Wang Yueping
Volume: 10
Issue: 2
Year: 2013





Microstructure evolution of ZA72 magnesium alloy during partial remelting

Author(s): Feng Kai | Huang Xiaofeng | Ma Ying
Volume: 10
Issue: 2
Year: 2013





Microstructure evolution and mechanical properties of homogenizing treated fully lamellar Ti-46Al-0.5W-0.5Si alloy

Author(s): Chen Hui | Su Yanqing
Volume: 10
Issue: 2
Year: 2013





Effect of a direct magnetic field on the interfacial microstructure between molten aluminium and solid iron

Author(s): HAN Yi | BAN Chun-yan | BA Qi-xian
Volume: 3
Issue: 2
Year: 2006





A new approach to develop complicated superalloy castings

Author(s): WU Jian-tao | FENG Di | LI Jun-tao
Volume: 3
Issue: 2
Year: 2006





Microstructure and properties of vacuum counter-pressure cast aluminum alloy

Author(s): YAN Qing-song | YU Huan | WEI Bo-kang
Volume: 3
Issue: 2
Year: 2006





Microstructure and bonding strength of Ni-based alloy coating

Author(s): LIU Qing | SHAO Wen-bao | WU Chun-jing
Volume: 3
Issue: 2
Year: 2006





Manufacture technique of semi-solid slurry of hypoeutectic Al-Si alloy by low superheat pouring and weak electromagnetic stirring

Author(s): LIU Zheng | MAO Wei-ming | ZHAO Zheng-duo
Volume: 3
Issue: 2
Year: 2006





Application of complex inoculants in improving the process-ability of grey cast iron for cylinder blocks

Author(s): LIU Wei-ming | REN Feng-zhang | LI Feng-jun
Volume: 3
Issue: 2
Year: 2006





Preparation technique of SiCp reinforced Al matrix composite

Author(s): HAO Bin | CUI Hua | YU Zhi-yong
Volume: 3
Issue: 2
Year: 2006





Polyurethane coating for ductile iron pipes

Author(s): WANG En-qing | ZHANG Xin
Volume: 3
Issue: 2
Year: 2006





Numerical simulation of complex multi-phase fluid of casting process and its applications

Author(s): CHEN Li-liang | LIU Rui-xiang | C. Beckermann
Volume: 3
Issue: 2
Year: 2006





Optimization of casting conditions for heat and abrasion resistant large grey iron castings

Author(s): S. M. Yoo | Y. S. Cho | C. C. Lee
Volume: 4
Issue: 2
Year: 2007





Effect of sub-zero cooling on microstructure and mechanical properties of a low alloyed austempered ductile iron

Author(s): S. Yazdani | M. Ardestani
Volume: 4
Issue: 2
Year: 2007





Effect of pulse magnetic field on solidification structure and properties of pure copper

Author(s): LIAO Xi-liang | GONG Yong-yong | LI Ren-xing
Volume: 4
Issue: 2
Year: 2007





Research on investment casting of TiAl alloy agitator treated by HIP and HT

Author(s): NAN Hai | HUANG Dong | LI Zhen-xi
Volume: 4
Issue: 2
Year: 2007





Study on heat treatment blister of squeeze casting parts

Author(s): TONG Wen-jun | QI Lin | QI Pi-xiang
Volume: 4
Issue: 2
Year: 2007





Quantitative inspection on graphite length of grey iron

Author(s): CAI Ming-dong | SUN Guo-xiong
Volume: 4
Issue: 2
Year: 2007





The forty years of vermicular graphite cast iron development in China (PartⅠ)

Author(s): QIU han-quan | CHEN Zheng-de
Volume: 4
Issue: 2
Year: 2007





Microstructure characteristics of Ni-43Ti-4Al-2Nb-2Hf alloy prepared by conventional casting and directional solidification

Author(s): Pan Liwen | Zheng Lijing | Zhou Lei
Volume: 9
Issue: 2
Year: 2012





Modelling of composite crystallization

Author(s): Jozef Szczepan Suchy | Janusz Lelito | Beata Gracz
Volume: 9
Issue: 2
Year: 2012





Section thickness-dependent tensile properties of squeeze cast magnesium alloy AM60

Author(s): Xuezhi Zhang | Meng Wang | Zhizhong Sun
Volume: 9
Issue: 2
Year: 2012





A response to numerical benchmark for solidification of binary alloys: macro-segregation with thermo-solutal convection

Author(s): Li Wensheng | Shen Houfa | Liu Baicheng
Volume: 9
Issue: 2
Year: 2012





Effects of composite oxide scale on oxidation resistance of superalloy K273

Author(s): Wang Haitao | Tan Jiwen | Chu Zhong
Volume: 9
Issue: 2
Year: 2012





Influences of processing parameters on microstructure during investment casting of nickel-base single crystal superalloy DD3

Author(s): Gao Sifeng | Liu Lin | Xu Yiku
Volume: 9
Issue: 2
Year: 2012





Influence of stirring speed on SiC particles distribution in A356 liquid

Author(s): Yao Shasha | Zhang Peng | Du Yunhui
Volume: 9
Issue: 2
Year: 2012





Effect of Ti-V-Nb-Mo addition on microstructure of high chromium cast iron

Author(s): Ma Youping | Li Xiulan | Liu Yugao
Volume: 9
Issue: 2
Year: 2012





Design and control of chemical compositions for high-performance austempered ductile iron

Author(s): Gong Wenbang | Chen Guodong | Luo Li
Volume: 9
Issue: 2
Year: 2012





High Cr white cast iron/carbon steel bimetal liner by lost foam casting with liquid-liquid composite process

Author(s): Xiao Xiaofeng | Ye Shengping | Yin Weixin
Volume: 9
Issue: 2
Year: 2012





Effect of Ce-rich rare earth on microstructure and mechanical properties of Mg-10Zn-5Al-0.1Sb magnesium alloy

Author(s): You Zhiyong | Zhang Zhaoguang | Zhang Jinshan
Volume: 9
Issue: 2
Year: 2012





Characterization of zirconia-based slurries with different binders for titanium investment casting

Author(s): Zhao Ertuan | Kong Fantao | Chen Yanfei
Volume: 9
Issue: 2
Year: 2012





Modeling of mechanical properties of as-cast Mg-Li-Al alloys based on PSO-BP algorithm

Author(s): Li Ming | Hao Hai | Zhang Aimin
Volume: 9
Issue: 2
Year: 2012





Influence of cooling rate and antimony addition content on graphite morphology and mechanical properties of a ductile iron

Author(s): Liu Zhe | Chen Weiping | Deng Yu
Volume: 9
Issue: 2
Year: 2012





Influence of silicide on fracture behavior of a fully lamellar Ti-46Al-0.5W-0.5Si alloy

Author(s): Chen Hui | Su Yanqing | Luo Liangshun
Volume: 9
Issue: 2
Year: 2012





Estimation of Gibbs free energy difference in Pd-based bulk metallic glasses

Author(s): Cai Anhui | Xiong Xiang | Liu Yong
Volume: 5
Issue: 2
Year: 2008





A new thermodynamic expression for Gibbs free energy difference ΔG between the under-cooled liquid and on microstructure of near-eutectic Al-13wt%Si alloy

Author(s): Xi Xiao | Zhou Jianyuan | Lü Jianhua
Volume: 5
Issue: 2
Year: 2008





An integration system for investment An integration system for investment turbine blade

Author(s): Jiang Ruisong | Zhang Dinghua | Wang Wenhu
Volume: 5
Issue: 2
Year: 2008





Study on binder system of CO2-cured phenol-formaldehyde resin used in phenol-formaldehyde resin used in foundry

Author(s): Liu Weihua | Li Yingmin | Qu Xueliang
Volume: 5
Issue: 2
Year: 2008





Semi-solid extrusion of aluminum alloy ZL116

Author(s): Zhao Dazhi | Lu Guimin | Cui Jianzhong
Volume: 5
Issue: 2
Year: 2008





Numerical simulation and optimization of Al alloy cylinder body by low pressure die casting

Author(s): Mi Guofa | Liu Yanlei | Zhao Hengtao
Volume: 5
Issue: 2
Year: 2008





Effect of ferrovanadium inoculation on microstructure and properties of high speed steel

Author(s): Zhang Xipeng | Kou Guojun | Wu Chunjing
Volume: 5
Issue: 2
Year: 2008





Effect of pressure on the feeding characteristics of ZCuZn16Si4 alloy

Author(s): Li Hailan | Sun Xun | Zhang Shiyan
Volume: 5
Issue: 2
Year: 2008





Recent development of ductile cast iron production technology in China

Author(s): Cai Qizhou | Wei Bokang
Volume: 5
Issue: 2
Year: 2008





The EVA plastic film for V-process and steel castings by V-process in China

Author(s): Ye Shengping | Wang Lei | Liu Dehan
Volume: 5
Issue: 2
Year: 2008





Thermal analysis control of in-mould and ladle inoculated grey cast irons

Author(s): Mihai Chisamera | Iulian Riposan | Stelian Stan
Volume: 6
Issue: 2
Year: 2009





Study on in-situ Mg2Si/Al-Si composites with different compositions

Author(s): Jing Qingxiu | Zhang Caixia | Huang Xiaodong
Volume: 6
Issue: 2
Year: 2009





Microstructure variation and growth mechanism of hypoeutectic Al-Si alloy solidifi ed under high pressure

Author(s): Zhang Guozhi | Yu Xifeng | Liu Xinggang
Volume: 6
Issue: 2
Year: 2009





Microstructure and mechanical properties of Mg-6Al magnesium alloy with yttrium and neodymium

Author(s): Chen Jun | Li Quanan | Li Jianghong
Volume: 6
Issue: 2
Year: 2009





Preparation of montmorillonite modified phenolic resin for shell process

Author(s): Xiong Jianmin | Li Yuancai | Wang Wenqing
Volume: 6
Issue: 2
Year: 2009





As-cast structure refinement of Ti-46Al alloy by hafnium and boron additions

Author(s): Zhang Li | Su Yanqing | Yang Huimin
Volume: 6
Issue: 2
Year: 2009





Effects of composite scale on high temperature oxidation resistance of Fe-Cr-Ni heat resistant alloy

Author(s): Wang Haitao | Wang Yuqing | Yu Huashun
Volume: 6
Issue: 2
Year: 2009





Fracture analysis of chilled cast iron camshaft

Author(s): Li Ping | Li Fengjun | Cai Anke
Volume: 6
Issue: 2
Year: 2009





Review of grain refinement methods for as-cast microstructure of magnesium alloy

Author(s): Song Changjiang | Han Qingyou | Zhai Qijie
Volume: 6
Issue: 2
Year: 2009





Colour Metallography of Cast Iron - Chapter 2: Spheroidal Graphite Cast Iron (Ⅱ)

Author(s): Zhou Jiyang
Volume: 7
Issue: 2
Year: 2010





Critical cooling rate on carbide precipitation during quenching of austenitic manganese steel

Author(s): Youn-Soo Ham | Jeong-Tae Kim | Si-Young Kwak
Volume: 7
Issue: 2
Year: 2010





Hot mold casting process of ancient East India and Bangladesh

Author(s): Barnali Mandal | Prasanta Kumar Datta
Volume: 7
Issue: 2
Year: 2010





Performance of heavy ductile iron castings for windmills

Author(s): Iulian Riposan | Mihai Chisamera | Stelian Stan
Volume: 7
Issue: 2
Year: 2010





Study on in-situ WC particles/tungsten wire reinforced iron matrix composites under electromagnetic field

Author(s): Niu Libin | Xu Yunhua | Wu Hong
Volume: 7
Issue: 2
Year: 2010





Influences of electric pulse on solidification structure of LM-29 Al-Si alloy

Author(s): He Lijia | Wang Jianzhong | Qi Jingang
Volume: 7
Issue: 2
Year: 2010





Effect of strontium on primary dendrite and eutectic temperature of A357 aluminum alloy

Author(s): Chen Zhongwei | Zhang Ruijie
Volume: 7
Issue: 2
Year: 2010





Cellular automaton modeling of semi-solid microstructure formation

Author(s): Li Qiang | Yu Baoyi | Zhang Huawen
Volume: 7
Issue: 2
Year: 2010





Temperature-induced anomalous structural changes of Al-12wt.%Sn-4wt.%Si melt and its influence on as-cast structure

Author(s): Wang Zhiming | Geng Haoran | Zhou Guorong
Volume: 7
Issue: 2
Year: 2010





Reversing design methodology of investment casting die profile based on ProCAST

Author(s): Dou Yangqing | Bu Kun | Dou Yangliu
Volume: 7
Issue: 2
Year: 2010





Numerical simulation of die filling behavior of AZ91D in the semisolid process

Author(s): Zhu Guanglei | Xu Jun | Zhang Zhifeng
Volume: 7
Issue: 2
Year: 2010





Complicated hollow turbine blades and surface grain refinement process

Author(s): Peng Zhijiang | Jia Shuqin | Zhang Zehai
Volume: 7
Issue: 2
Year: 2010





Effects of spherical quasi-crystal on microstructure and mechanical properties of ZA155 high zinc magnesium alloy

Author(s): Zhang Jinshan | Liu Yali | Zhang Yan
Volume: 7
Issue: 2
Year: 2010





Microstructures and formation mechanism of hypoeutectic white cast iron by isothermal electromagnetic rheocast process

Author(s): Zhang Wanning | Song Dan | Zhang Hongbing
Volume: 7
Issue: 2
Year: 2010





Influence of melt hydrogenation during induction skull melting process on the solidification microstructure of Ti-6Al-4V alloy

Author(s): Zhang Yuehong | Su Yanqing | Ye Xicong
Volume: 7
Issue: 2
Year: 2010





Improvement of humidity resistance of water soluble core by precipitation method

Author(s): Zhang Long | Li Yuancai | Zhao Wei
Volume: 8
Issue: 2
Year: 2011





Electromagnetic characteristics of square cold crucible designed for silicon preparation

Author(s): Chen Ruirun | Huang Feng | Guo Jingjie
Volume: 8
Issue: 2
Year: 2011





Effect of potassium on as-cast microstructure of a hypereutectic high chromium cast iron

Author(s): Liu Qing | Yang Hua | Ding Haimin
Volume: 8
Issue: 2
Year: 2011





Effect of casting technology on microstructure and phases of high carbon high speed steel

Author(s): Zhang Tianming | Wang Qinjuan | Song Xuding
Volume: 8
Issue: 2
Year: 2011





Interaction mechanism between niobium-silicide-based alloy melt and Y2O3 refractory crucible in vacuum induction melting process

Author(s): Gao Ming | Jia Lina | Tang Xiaoxia
Volume: 8
Issue: 2
Year: 2011





Study on roasting process of zircon-silica sol ceramic mould

Author(s): Zhang Yeming | Zeng Ming | Hu Li
Volume: 8
Issue: 2
Year: 2011





Optimization of casting process based on the theory of inventive problem solving

Author(s): Liu Feng | Yang Yi | Li Xionglong
Volume: 8
Issue: 2
Year: 2011





Using finite difference method to simulate casting thermal stress

Author(s): Liao Dunming | Zhang Bin | Zhou Jianxin
Volume: 8
Issue: 2
Year: 2011





Effect of temperature field on solidification structure of pure Al under pulse magneto-oscillation

Author(s): Li Bo | Yin Zhenxing | Gong Yongyong
Volume: 8
Issue: 2
Year: 2011





An investigation on bonding interface microstructure of ceramic coating prepared on AZ91D by evaporated pattern casting technique

Author(s): Chen Dongfeng | Dong Xuanpu | Fan Zitian
Volume: 8
Issue: 2
Year: 2011





Curing mechanism of furan resin modified with different agents and their thermal strength

Author(s): Huang Renhe | Gao Hongmei | Tang Yaoji
Volume: 8
Issue: 2
Year: 2011





Colour Metallography of Cast Iron - Chapter 4: Vermicular Graphite Cast Iron (Ⅱ)

Author(s): Zhou Jiyang
Volume: 8
Issue: 2
Year: 2011





Graded coal — its role in iron casting production from greensand systems

Author(s): Alexander Brown
Volume: 8
Issue: 2
Year: 2011





Improving chill control in iron powder treated slightly hypereutectic grey cast irons

Author(s): Iulian Riposan | Mihai Chisamera | Stelian Stan
Volume: 8
Issue: 2
Year: 2011





Sn60Pb40 solder powders produced by the planar flow casting atomization process

Author(s): Xiang Qingchun | Zhao Jing | Pan Haicheng
Volume: 8
Issue: 2
Year: 2011





Solidified structure of thin-walled titanium parts by vertical centrifugal casting

Author(s): Wu Shiping | Xu Qin | Zhang Jun
Volume: 8
Issue: 2
Year: 2011





Opportunities and challenges of Chinese die-casting market

Author(s): Caifei SONG
Volume: 1
Issue: 1
Year: 2004





Development of electroslag metallurgy and casting in China

Author(s): Zhengbang LI
Volume: 1
Issue: 1
Year: 2004





Advances in the research of nitrogen containing stainless steels

Author(s): Zhongqiu ZHANG | Xinya LI | Yanchun LOU
Volume: 1
Issue: 1
Year: 2004





Low-temperature superplasticity of ZK40 magne-sium alloy processed using equal channel angular pressing

Author(s): Li LIN | Lijia CHEN | Wei WU
Volume: 1
Issue: 1
Year: 2004





The mechanism of hot crack formation in Ti-6A1-4V during cold crucible continuous casting

Author(s): Hongsheng DING
Volume: 1
Issue: 1
Year: 2004





Microstructure refinement of Sn一Sb Peritectic alloy by power ultrasonic

Author(s): Haibo ZHANG | Qijie ZHAI | Feipeng QI
Volume: 1
Issue: 1
Year: 2004





Computer precision simulation for titanium casting centrifugal mold filling of prescision titanium castings

Author(s): Daming XU | Xin LI | Geving AN
Volume: 1
Issue: 1
Year: 2004





Accuracy analysis of the part made by selected laser sintering

Author(s): Zitian FAN | Naiyu HUANG | Yuejia XIAO
Volume: 1
Issue: 1
Year: 2004





Effects of processing parameters on microstructure of semi-solid magnesium alloy

Author(s): Shusen WU | Dongnan LI | Youwu MAO
Volume: 1
Issue: 1
Year: 2004





Measurement of elastic modulus and evaluation of viscoelasticity of foundry green sand

Author(s): Qingchun XIANG | Zuxi XIE | Fengwen ZHANG
Volume: 1
Issue: 1
Year: 2004





Rheologic behaviors of A356 aluminum alloy billet produced by semisolid continuous casting process

Author(s): Shuming XING | Lizhong ZHANG | Yunhui DU
Volume: 1
Issue: 1
Year: 2004





Influence of annealing and spheroidizing treatment on microstructure and mechanical properties of AZ91 magnesium alloy

Author(s): Zhang Jumei | Wang Zhihu | Jiang Bailing
Volume: 10
Issue: 1
Year: 2013





Relationship between micro-porosity and tensile properties of 6063 alloy

Author(s): Li Xiehua | He Lizi | Zhu Pei
Volume: 10
Issue: 1
Year: 2013





Microstructural evolution of directionally solidified DZ125 superalloy castings with different solidification methods

Author(s): Ge Bingming | Liu Lin | Zhang Jun
Volume: 10
Issue: 1
Year: 2013





Effect of Bi modification treatment on microstructure, tensile properties, and fracture behavior of cast Al-Mg2Si metal matrix composite

Author(s): Wu Xiaofeng | Wang Zhe | Zhang Guangan
Volume: 10
Issue: 1
Year: 2013





Research and application of enterprise resource planning system for foundry enterprises

Author(s): Zhou Jianxin | Ji Xiaoyuan | Liao Dunming
Volume: 10
Issue: 1
Year: 2013





Latest advances and developments in aluminum shape casting

Author(s): Qigui Wang
Volume: 10
Issue: 1
Year: 2013





Grain refinement of AZ91D alloy by intensive melt shearing and its persistence after remelting and isothermal holding

Author(s): Zuo Yubo | Fan Zhongyun | Cui Jianzhong
Volume: 10
Issue: 1
Year: 2013




