Academic Journals Database
Disseminating quality controlled scientific knowledge

Journal of the Brazilian Society of Mechanical Sciences and Engineering

ISSN: 1678--5878
Publisher: The Brazilian Society of Mechanical Sciences and Engineering


ADD TO MY LIST
 
Vibration energy harvesting using piezoelectric transducer and non-controlled rectifiers circuits

Author(s): Daniel Motter | Jairo Vinícius Lavarda | Felipe Aguiar Dias | Samuel da Silva
Volume: 34
Issue: spe
Year: 2012
System identification and active vibration control of a flexible structure

Author(s): Gustavo Luiz C. M. de Abreu | Sanderson M. da Conceição | Vicente Lopes Jr. | Michael John Brennan | Marco Túlio Santana Alves
Volume: 34
Issue: spe
Year: 2012
Control of strain in a flexible beam using Ni-Ti-Cu shape memory alloy wire actuators

Author(s): Walber Medeiros Lima | Carlos José de Araújo | Walter Andrés Vermehren Valenzuela | José Sérgio da Rocha Neto
Volume: 34
Issue: spe
Year: 2012
Usable work of macro-scale cavities in liquids

Author(s): Harry Edmar Schulz | Geraldo Lombardi | Francisco Júlio do Nascimento | Hélio José Donizeti Trebi | Jorge Nicolau dos Santos | André Luiz Andrade Simões
Volume: 34
Issue: 4
Year: 2012
Design of a computer aided quick-stop device for study of dead metal zone formation

Author(s): Sabri Ozturk | Erhan Altan
Volume: 34
Issue: 4
Year: 2012
Double diffusive natural convection in power-law fluid saturated porous medium with Soret and Dufour Effects

Author(s): D. Srinivasacharya | G. Swamy Reddy
Volume: 34
Issue: 4
Year: 2012
Studying transmission of fuel storage bank to NGV cylinder in CNG fast filling station

Author(s): Mahdi Deymi-Dashtebayaz | Mahmood Farzaneh Gord | Hamid Reza Rahbari
Volume: 34
Issue: 4
Year: 2012
On the evaluation of linear and non-linear models using DNS data of turbulent channel flows

Author(s): Hasna BenSaid | Gilmar Mompean | Hassane Naji
Volume: 34
Issue: 4
Year: 2012
Geometric classification tests using interval arithmetic in b-rep solid modeling

Author(s): Tsuzuki M. de S. G. | Shimada M.
Volume: 25
Issue: 4
Year: 2003
Improving the power consumption in pneumatic conveying systems by a daptive control of the flow regime

Author(s): Barbosa P. R. | Seleghim Jr. P.
Volume: 25
Issue: 4
Year: 2003
A novel hypersingular B.E.M. formulation for three-dimensional potential problems

Author(s): Huacasi W. | Mansur W. J. | Azevedo J. P. S.
Volume: 25
Issue: 4
Year: 2003
Numerical simulation of the wind action on a long-span bridge deck

Author(s): Braun A. L. | Awruch A. M.
Volume: 25
Issue: 4
Year: 2003
Effects of wet CO oxidation on the operation of engines and power generators

Author(s): Costa F. de S. | Cardoso J. | Villela T. E. A. | Veras C. A. G.
Volume: 25
Issue: 4
Year: 2003
Effect of the fiber reinforcement on the low energy impact behavior of fabric reinforced resin matrix composite materials

Author(s): Morais W. A. de | d'Almeida J. R. M. | Godefroid L. B.
Volume: 25
Issue: 4
Year: 2003
On the development of an agglomeration multigrid solver for turbulent flows

Author(s): Strauss D. | Azevedo J. L. F.
Volume: 25
Issue: 4
Year: 2003
Vibrations of a parametrically and self-Excited system with ideal and non-ideal energy sources

Author(s): Warminski J. | Balthazar J. M.
Volume: 25
Issue: 4
Year: 2003
A short note on a nonlinear system vibrations under two non-ideal excitations

Author(s): Palacios J. L. | Balthazar J. M. | Brasil R. M. L. R. F.
Volume: 25
Issue: 4
Year: 2003
Kinetic energy in grid turbulence: comparison between data and theory

Author(s): Janzen J. G. | Souza L. B. S. de | Schulz H. E.
Volume: 25
Issue: 4
Year: 2003
Universal closed-form of lagrangian multipliers for coast-arcs of optimum space trajectories

Author(s): Fernandes S. da S.
Volume: 25
Issue: 4
Year: 2003
Identification of flutter parameters for a wing model

Author(s): De Marqui Junior Carlos | Rebolho Daniela C. | Belo Eduardo M. | Marques Flávio D.
Volume: 28
Issue: 3
Year: 2006
Transient stability of empty and fluid-filled cylindrical shells

Author(s): Gonçalves Paulo B. | Silva Frederico M. A. da | del Prado Zenon J. G. N.
Volume: 28
Issue: 3
Year: 2006
Adaptive techniques applied to offshore dynamic positioning systems

Author(s): Tannuri Eduardo A. | Kubota Leonardo K. | Pesce Celso P.
Volume: 28
Issue: 3
Year: 2006
Recent advances in multi-body dynamics and nonlinear control

Author(s): Udwadia Firdaus E.
Volume: 28
Issue: 3
Year: 2006
Multimodal vibration damping through piezoelectric patches and optimal resonant shunt circuits

Author(s): Viana Felipe Antonio C. | Steffen Jr,Valder
Volume: 28
Issue: 3
Year: 2006
Sensitivity analysis of shallow water problems via perturbative methods

Author(s): Fraidenraich Ariel | Jacovkis Pablo M. | Lima Fernando Roberto de A.
Volume: 28
Issue: 3
Year: 2006
Some observations on wear and damages in cemented carbide tools

Author(s): Melo Anderson C. A. de | Milan Júlio César G. | Silva Márcio B. da | Machado Álisson R.
Volume: 28
Issue: 3
Year: 2006
Critical flow regions in tissue artificial heart valve assessed by laser doppler anemometer in continuous flow

Author(s): Pinotti Marcos | Faria Edna M. de
Volume: 28
Issue: 3
Year: 2006
Heat transfer coefficient in a shallow fluidized bed heat exchanger with a continuous flow of solid particles

Author(s): Pécora Araí A. Bernárdez | Parise Maria Regina
Volume: 28
Issue: 3
Year: 2006
Numerical simulation of magnetic field for electromagnetic casting of hollow billets

Author(s): Wang Z. F. | Cui J. Z. | Piao F. X. | Wang Z. Y. | Ma M. X.
Volume: 27
Issue: 3
Year: 2005
Geometrical aspects on bi-material microtensile tests

Author(s): Meira J. B. C. | Ballester R. Y. | Lima R. G. | Martins de Souza R. | Driemeier L.
Volume: 27
Issue: 3
Year: 2005
A source wake model for cascades of axial flow turbomachines

Author(s): Ramirez Camacho R. G. | Manzanares Filho N.
Volume: 27
Issue: 3
Year: 2005
Influence of specimen dimensions on nominal polymerization contraction stress of a dental composite

Author(s): Witzel M. F. | Braga R. R. | Ballester R. Y. | Lima R. G.
Volume: 27
Issue: 3
Year: 2005
Simulations of incompressible fluid flows by a least squares finite element method

Author(s): Pereira V. D. | Campos Silva J. B.
Volume: 27
Issue: 3
Year: 2005
Phenomenological model of particulate matter emission from direct injection diesel engines

Author(s): Argachoy C. | Pimenta A. P.
Volume: 27
Issue: 3
Year: 2005
A methodology and computational system for the simulation of fluid-structure interaction problem

Author(s): Antunes A. R. E. | Lyra P. R. M. | Willmersdorf R. B.
Volume: 27
Issue: 3
Year: 2005
A methodology for quality control evaluation for laminated composites manufacturing

Author(s): Morais D. T. S. | Avila A. F.
Volume: 27
Issue: 3
Year: 2005
An evaporative and desiccant cooling system for air conditioning in humid climates

Author(s): Camargo J. R. | Godoy Jr E. | Ebinuma C. D.
Volume: 27
Issue: 3
Year: 2005
Comparison between a centered and a flux difference split schemes using unstructured strategy

Author(s): Maciel E. S. de G.
Volume: 27
Issue: 3
Year: 2005
An extension of the partition of unity finite element method

Author(s): Alves M. Krajnc | Rossi R.
Volume: 27
Issue: 3
Year: 2005
Theoretical and experimental dynamic analysis of fiber reinforced composite beams

Author(s): Tita V. | Carvalho J. de | Lirani J.
Volume: 25
Issue: 3
Year: 2003
Analytical modeling of multipass welding process with distributed heat source

Author(s): Fassani R. N. S. | Trevisan O. V.
Volume: 25
Issue: 3
Year: 2003
Complexity control in the topology optimization of continuum structures

Author(s): Cardoso E. L. | Fonseca J. S. O.
Volume: 25
Issue: 3
Year: 2003
Comparison of engine power correction factors for varying atmospheric conditions

Author(s): Sodré J. R. | Soares S. M. C.
Volume: 25
Issue: 3
Year: 2003
Building 3D frameworks of accessory aquatic systems

Author(s): Soares C. B. P. | Medeiros J. L. de
Volume: 25
Issue: 3
Year: 2003
Analysis of a porous exponential slider bearing lubricated with a ferrofluid considering slip velocity

Author(s): Shah Rajesh C. | Bhat M. V.
Volume: 25
Issue: 3
Year: 2003
Estimation of the SEA coupling loss factors by means of spectral element modeling

Author(s): Ahmida K. M. | Arruda J. R. F.
Volume: 25
Issue: 3
Year: 2003
Heat flux canals (HFC) technique: an alternative to cool down stereolithography moulds

Author(s): Ahrens C. H. | Ribeiro Jr A. S. | Beal V. E.
Volume: 25
Issue: 3
Year: 2003
A comparison of flexible coupling models for updating in rotating machinery response

Author(s): Tadeo A. T. | Cavalca K. L.
Volume: 25
Issue: 3
Year: 2003
Metal transfer in the aluminum gas metal arc welding

Author(s): Ferraresi V. A. | Figueiredo K. M. | Ong T. Hiap
Volume: 25
Issue: 3
Year: 2003
Influence of the mechanical and metallurgical state of an Al-Mg alloy on the surface integrity in ultraprecision machining

Author(s): Jasinevicius R. G. | Campos G. P. de | Montanari L. | Tsukamoto R. | Garcia J. P. | Camargo R. | Duduch J. G. | Porto A. J. V.
Volume: 25
Issue: 3
Year: 2003
Virtual kinematic chains to solve the underwater vehicle-manipulator systems redundancy

Author(s): Santos Carlos H. F. dos | Guenther Raul | Martins Daniel | De Pieri Edson R.
Volume: 28
Issue: 3
Year: 2006
Analytical and numerical approaches to study the gravitational capture in the four-body problem

Author(s): Prado Antonio F B. de A
Volume: 28
Issue: 3
Year: 2006
Structural optimization for statics, dynamics and beyond

Author(s): Vanderplaats Garret N.
Volume: 28
Issue: 3
Year: 2006
Unsteady MHD flow of a dusty non-Newtonian Bingham fluid through a circular pipe

Author(s): Attia Hazem A.
Volume: 28
Issue: 3
Year: 2006
Neural networks assessment of beam-to-column joints

Author(s): Lima L. R. O. de | Vellasco P. C. G. da S. | Andrade S. A. L. de | Silva J. G. S. da | Vellasco M. M. B. R.
Volume: 27
Issue: 3
Year: 2005
The influence of loading on the heat of transformation in shape memory alloys

Author(s): Da Silva E. Paulo
Volume: 27
Issue: 3
Year: 2005
Experimental evaluation of cutting force parameters applying mechanistic model in orthogonal milling

Author(s): Coelho R. T. | Braghini Jr. A. | Valente C. M. O. | Medalha G. C.
Volume: 25
Issue: 3
Year: 2003
In-plane strain measurement by digital image correlation

Author(s): Hung Po-Chih | Voloshin A. S.
Volume: 25
Issue: 3
Year: 2003
Reduction of pollutants emissions on SI engines: accomplishments with efficiency increase

Author(s): Vianna J. N. de S. | Reis A. do V. | Oliveira A. B. de S. | Fraga A. G. | Sousa M. T. de
Volume: 27
Issue: 3
Year: 2005
A direct approach to area change in continuum mechanics

Author(s): Martins L. C. | Oliveira R. F. de
Volume: 25
Issue: 3
Year: 2003
Dynamic signal analyses in dry sliding wear tests

Author(s): Bergantin R. | Maru M. M. | Farias M. C. M. | Padovese L. R.
Volume: 25
Issue: 3
Year: 2003
Novozhilov's mean rotation measures invariance

Author(s): Oliveira R. F. de | Santiago J. A. F. | Cezario F.
Volume: 27
Issue: 3
Year: 2005
Production of rheocast slurries by partial melting through alternative thermomechanical treatments

Author(s): Margarido M. | Robert M. H.
Volume: 25
Issue: 2
Year: 2003
The effects of mechanical alloying on the extrusion process of AA 6061 alloy reinforced with Si3N4

Author(s): Fogagnolo J. B. | Robert M. H. | Torralba J. M.
Volume: 25
Issue: 2
Year: 2003
The influence of chemical composition of high-speed steels on the wear during cutting and erosion tests

Author(s): Dobrzanski L. A. | Kasprzak W. | Adamiak M. | Sokovic M. | Kopac J. | D?Errico G.
Volume: 25
Issue: 2
Year: 2003
Application of neural networks in steels' chemical composition design

Author(s): Dobrzaski L. A. | Sitek W.
Volume: 25
Issue: 2
Year: 2003
Modeling solidification and mushy zone deformation of alloys

Author(s): Rizzo E. M. da S. | Santos R. Gomes dos | Beckermann C.
Volume: 25
Issue: 2
Year: 2003
Time dependent response of a rubber-toughened carbon/epoxy composite with damage accumulation

Author(s): Soriano E. de A. | Almeida S. F. Müller de
Volume: 25
Issue: 2
Year: 2003
Toughness of two HSLA steel sheets

Author(s): Magnabosco R. | Rossetto L. C.
Volume: 25
Issue: 2
Year: 2003
CMM touch trigger performance verification using a probe test apparatus

Author(s): Miguel P. A. Cauchick | King T. | Abackerli A. J.
Volume: 25
Issue: 2
Year: 2003
Vortex method with turbulence sub-grid scale modelling

Author(s): Pereira L. A. A. | Hirata M. H. | Silveira Neto A.
Volume: 25
Issue: 2
Year: 2003
A new robotic drive joint friction compensation mechanism using neural networks

Author(s): Gervini V. I. | Gomes S. C. P. | Rosa V. S. da
Volume: 25
Issue: 2
Year: 2003
Modeling and experimental evaluation of parallel flow micro channel condensers

Author(s): Jabardo J. M. Saiz | Mamani W. G.
Volume: 25
Issue: 2
Year: 2003
Transient chaos in an elasto-plastic beam with hardening

Author(s): Savi M. A. | Pacheco P. M. C. L.
Volume: 25
Issue: 2
Year: 2003
Buckling analysis of high-temperature pressurized pipelines with soil-structure interaction

Author(s): Einsfeld R. A. | Murray D. W. | Yoosef-Ghodsi N.
Volume: 25
Issue: 2
Year: 2003
The elliptic-bi-parabolic planar transfer for artificial satellites

Author(s): Prado A. F. B. A.
Volume: 25
Issue: 2
Year: 2003
Application of mass conservation method to investigate the wind patterns over an area of complex topography

Author(s): Karam H. A. | Oliveira A. P. | Soares J.
Volume: 25
Issue: 2
Year: 2003
Generalized Integral Transform Solution for hydrodynamically developing non-Newtonian flows in circular tubes

Author(s): Nascimento Shirley C. C. | Macêdo Emanuel N. | Quaresma João N. N.
Volume: 28
Issue: 1
Year: 2006
In-process grinding monitoring through acoustic emission

Author(s): Aguiar Paulo R. | Serni Paulo J. A. | Dotto Fábio R. L. | Bianchi Eduardo C.
Volume: 28
Issue: 1
Year: 2006
Orbital control of a satellite using the gravity of the Moon

Author(s): Prado Antônio F. B. A.
Volume: 28
Issue: 1
Year: 2006
Punching and broaching combos - a newstamping tool

Author(s): Mello Lizandro B. de | Marcondes Paulo V. P.
Volume: 28
Issue: 1
Year: 2006
Active flutter suppression in a 2-D airfoil using linear matrix inequalities techniques

Author(s): Silva Samuel da | Lopes Júnior Vicente
Volume: 28
Issue: 1
Year: 2006
Carbon dioxide evaporation in a single microchannel

Author(s): Gasche José L.
Volume: 28
Issue: 1
Year: 2006
Development of an omnidirectional vision system

Author(s): Grassi Junior Valdir | Okamoto Junior Jun
Volume: 28
Issue: 1
Year: 2006
Biodegradable fibrous thermal insulation

Author(s): Manohar Krishpersad | Ramlakhan Dale | Kochhar Gurmohan | Haldar Subhas
Volume: 28
Issue: 1
Year: 2006
Film thickness and wave velocity measurement using reflected laser intensity

Author(s): Oliveira Fábio S. de | Yanagihara Jurandir I. | Pacífico Antônio L.
Volume: 28
Issue: 1
Year: 2006
Influence of process parameters on the quality of thermally sprayed X46Cr13 stainless steel coatings

Author(s): Schiefler Filho M. F. O. | Buschinell i A. J. A. | Gärtner F. | Kirsten A. | Voyer J. | Kreye H.
Volume: 26
Issue: 1
Year: 2004
Recent developments in high productivity pipeline welding

Author(s): Yapp D. | Blackman S. A.
Volume: 26
Issue: 1
Year: 2004
Evaluation of cutting forces and prediction of chatter vibrations in milling

Author(s): Lacerda H. B. | Lima V. T.
Volume: 26
Issue: 1
Year: 2004
Information and knowledge models supporting brake friction material manufacturing

Author(s): Costa C. A. | Luciano M. A.
Volume: 26
Issue: 1
Year: 2004
Normalizing heat treatment effect on low alloy steel weld metals

Author(s): Trindade Filho V. B. da | Guimarães A. S. | Payão Filho J. da C. | Paranhos R. P. da R.
Volume: 26
Issue: 1
Year: 2004
A comparative study on ultrasonic machining of hard and brittle materials

Author(s): Guzzo P. L. | Shinohara A. H. | Raslan A. A.
Volume: 26
Issue: 1
Year: 2004
The development of an open architecture control system for CBN high speed grinding

Author(s): Silva E. Jannone da | Biffi M. | Oliveira J. F. G. de
Volume: 26
Issue: 1
Year: 2004
Formability evaluation of two austenitic stainless steels

Author(s): Andrade M. S. | Gomes O. A. | Vilela J. M. C. | Serrano A. T. L. | Moraes J. M. D. de
Volume: 26
Issue: 1
Year: 2004
The use of stereolithography rapid tools in the manufacturing of metal powder injection molding parts

Author(s): Beal V. E. | Ahrens C. H. | Wendhausen P. A.
Volume: 26
Issue: 1
Year: 2004
GMAW welding optimization using genetic algorithms

Author(s): Correia D. S. | Gonçalves C. V. | Junior Sebastião S. C. | Ferraresi V. A.
Volume: 26
Issue: 1
Year: 2004
Study of the machinability of compacted graphite iron for drilling process

Author(s): Mocellin F. | Melleras E. | Guesser W. L. | Boehs L.
Volume: 26
Issue: 1
Year: 2004
Toroidal milling of hardened SAE H13 steel

Author(s): Diniz A. E. | Ferreira J. R. | Silveira J. F.
Volume: 26
Issue: 1
Year: 2004
Evaluation of the performance of different nano-ceramic tool grades when machining nickel-base, inconel 718, alloy

Author(s): Ezugwu E. O. | Bonney J. | Silva R. B. da | Machado A. R.
Volume: 26
Issue: 1
Year: 2004
High speed machining of aero-engine alloys

Author(s): Ezugwu E. O.
Volume: 26
Issue: 1
Year: 2004
A model-based predictive control scheme for steal rolling mills using neural networks

Author(s): Gálvez J. M. | Zárate Luis E. | Helman H.
Volume: 25
Issue: 1
Year: 2003
Transverse cylindrical grinding of a eutectic alloy

Author(s): Bianchi E. C. | Vargas V. L. | Magagnin T. C. | Monici R. D. | Vicari Filho O. | Aguiar P. R. de | Silva E. Jannone da
Volume: 25
Issue: 1
Year: 2003
Recurrent neural network approaches for biped walking robot based on zero-moment point criterion

Author(s): Gonçalves J. B. | Zampieri D. E.
Volume: 25
Issue: 1
Year: 2003
Minimum lubrication in Al-Si drilling

Author(s): Braga D. U. | Diniz A. E. | Miranda G. W. A. | Coppini N. L.
Volume: 25
Issue: 1
Year: 2003
The performance of a fluidized particulate feeding system with multiple discharge sections

Author(s): Tureso J. P. | Milioli F. E. | Lombardi G.
Volume: 25
Issue: 1
Year: 2003
The application of a mesoscopic scale approach in fretting fatigue

Author(s): Araújo J. A. | Mamiya E. N.
Volume: 25
Issue: 1
Year: 2003
Sensitivity computations using first and second orders perturbative methods for the advection-diffusion-reaction model of pollutant transport

Author(s): Fraidenraich A. | Jacovkis P. M. | Lima F. R. de A.
Volume: 25
Issue: 1
Year: 2003
An architecture for the design entity

Author(s): Barbosa C. A. M. | Dreux M. | Feijó B.
Volume: 25
Issue: 1
Year: 2003
Thermal properties estimation of polymers using only one Active Surface

Author(s): Silva S. M. M. de Lima e | Ong T. H. | Guimarães G.
Volume: 25
Issue: 1
Year: 2003
Drag optimization for transport aircraft Mission Adaptive Wing

Author(s): Martins A. L. | Catalano F. M.
Volume: 25
Issue: 1
Year: 2003
Intelligent systems for welding process automation

Author(s): Alfaro Sadek C. A. | Drews Paul
Volume: 28
Issue: 1
Year: 2006
Output-only structural identification of random vibrating systems

Author(s): Mucheroni Mário F. | Cardoso Andréa
Volume: 28
Issue: 1
Year: 2006
Cascade controlled pneumatic positioning system with LuGre model based friction compensation

Author(s): Guenther Raul | Perondi Eduardo A. | DePieri Edson R. | Valdiero Antônio C.
Volume: 28
Issue: 1
Year: 2006
Inverse and optimization problems in heat transfer

Author(s): Colaço Marcelo J. | Orlande Helcio R. B. | Dulikravich George S.
Volume: 28
Issue: 1
Year: 2006
Force prediction in thread milling

Author(s): Araujo A. C. | Silveira J. L. | Kapoor S.
Volume: 26
Issue: 1
Year: 2004
A new model for Fast-acting electromagnetic fuel injector analysis and design

Author(s): Passarini L. C. | Pinotti Jr,M.
Volume: 25
Issue: 1
Year: 2003
Chaotic motion of an elasto-plastic beam

Author(s): Savi M. A. | Pacheco P. M. C. L.
Volume: 25
Issue: 1
Year: 2003
Velocity and pressure fluctuations on inclined tube banks submitted to turbulent flow

Author(s): Barcellos C. R. | Bartz C. L. | Endres L. A. M. | Möller S. V.
Volume: 25
Issue: 1
Year: 2003
Direct numerical simulations of emulsion flows

Author(s): Cunha F. R. | Almeida M. H. P. | Loewenberg M.
Volume: 25
Issue: 1
Year: 2003
Errata

Volume: 26
Issue: 1
Year: 2004
Save time & money - Smart Internet Solutions      Why do you need a reservation system?