Academic Journals Database
Disseminating quality controlled scientific knowledge

Advances in Mechanical Engineering

ISSN: 1687--8132
Publisher: Hindawi Publishing Corporation


ADD TO MY LIST
 
Mixed Volume and Boundary Integral Equation Method with Elliptical Inclusions and a Circular/Elliptical Void

Author(s): Jung-Ki Lee | Heung-Soap Choi | Young-Bae Han
Volume: 2013
Year: 2013
Comments on Thermal Physical Properties Testing Methods of Phase Change Materials

Author(s): Jingchao Xie | Yue Li | Weilun Wang | Song Pan | Na Cui | Jiaping Liu
Volume: 2013
Year: 2013
Study on the Application of Cool Paintings for the Passive Cooling of Existing Buildings in Mediterranean Climates

Author(s): V. Costanzo | G. Evola | A. Gagliano | L. Marletta | F. Nocera
Volume: 2013
Year: 2013
Marker Identification Technique for Deformation Measurement

Author(s): Huaiwen Wang
Volume: 2013
Year: 2013
Dynamic Modeling and Analysis of Hub-Tapered Beam System

Author(s): Si-jia Chen | Ding-guo Zhang
Volume: 2013
Year: 2013
Recommendation in Motion: Intelligent Hypertouch Garment Design

Author(s): Shuang Liang | George Baciu | Rong-Hua Li | Jinyuan Jia | Jianhua Zhang
Volume: 2013
Year: 2013
Analysis of Grinding Force and Elastic Deformation in Thread Grinding Process

Author(s): Wei Wang | Xianying Feng
Volume: 2013
Year: 2013
APF-Based Car Following Behavior Considering Lateral Distance

Author(s): Zhao-Sheng Yang | Yao Yu | De-Xin Yu | Hu-Xing Zhou | Xiang-Lun Mo
Volume: 2013
Year: 2013
Effects of Process Parameters on Microstructure of A2017 Alloy Strip Produced by a Novel Semisolid Rolling

Author(s): Zhan-yong Zhao | Ren-guo Guan | Xiang Wang | Jian Zhang | Chun-ming Liu | Guang-ming Xu
Volume: 2013
Year: 2013
Research on SDG-Based Qualitative Reasoning in Conceptual Design

Author(s): Kai Li | Zhen-Zhen Yi | Wei Xu | Ke Zhao | Lin Wang
Volume: 2013
Year: 2013
A Biomechanical Study on Laminectomy and Dekyphosis for Thoracic Ossification of the Posterior Longitudinal Ligament

Author(s): Tadaki Okayama | Hideki Murakami | Satoru Demura | Norio Kawahara | Katsuro Tomita | Hiroyuki Tsuchiya
Volume: 2013
Year: 2013
The Effect of First-Order Bending Resonance of Wheelset at High Speed on Wheel-Rail Contact Behavior

Author(s): Shuoqiao Zhong | Xinbiao Xiao | Zefeng Wen | Xuesong Jin
Volume: 2013
Year: 2013
Automatic Detection of Repetitive Components in 3D Mechanical Engineering Models

Author(s): Laixiang Wen | Jinyuan Jia | Shuang Liang | Jianhua Zhang
Volume: 2013
Year: 2013
Optimal Parameter Estimation for Muskingum Model Using a CSS-PSO Method

Author(s): S. Talatahari | R. Sheikholeslami | B. Farahmand Azar | H. Daneshpajouh
Volume: 2013
Year: 2013
Development of Ocean Energy Technologies: A Case Study of China

Author(s): Qin Guodong | Lou Ping | Wu Xianglian
Volume: 2013
Year: 2013
Research on Wireless Video Monitoring System

Author(s): Zhao Hong | Yang Peng | Gong Ren-bin | Liang Xi-jun
Volume: 2013
Year: 2013
Approximate Bisimulation for High-Level Datapaths in Intelligent Transportation Systems

Author(s): Hui Deng | Jinzhao Wu | Hongyan Tan
Volume: 2013
Year: 2013
Development of Lifting and Propulsion Mechanism for Biped Robot Inspired by Basilisk Lizards

Author(s): Linsen Xu | Tao Mei | Xianming Wei | Kai Cao | Mingzhou Luo
Volume: 2013
Year: 2013
Elastodynamic Effects of Mass-Balancing: Experimental Investigation of a Four-Bar Linkage

Author(s): Alberto Martini | Marco Troncossi | Alessandro Rivola
Volume: 2013
Year: 2013
Nonlinear Dynamics Modeling and Analysis of Torsional Spring-Loaded Antibacklash Gear with Time-Varying Meshing Stiffness and Friction

Author(s): Zheng Yang | Jianzhong Shang | Zirong Luo | Xiaoming Wang | Naihui Yu
Volume: 2013
Year: 2013
Analysis of Thermal Stability in a Convecting and Radiating Two-Step Reactive Slab

Author(s): O. D. Makinde | M. S. Tshehla
Volume: 2013
Year: 2013
Improved Thin-Walled Finite Curved Beam Elements

Author(s): Nam-Il Kim | Chan-Ki Jeon
Volume: 2013
Year: 2013
Fast Numerical Solutions of Gas-Particle Two-Phase Vacuum Plumes

Author(s): ZhaoXin Ren | Bing Wang | Huiqiang Zhang
Volume: 2013
Year: 2013
A Review of the Piston Effect in Subway Stations

Author(s): Song Pan | Li Fan | Jiaping Liu | Jingchao Xie | Yuying Sun | Na Cui | Lili Zhang | Binyang Zheng
Volume: 2013
Year: 2013
Experimental Study of the Performance of Air Source Heat Pump Systems Assisted by Low-Temperature Solar-Heated Water

Author(s): Jinshun Wu | Chao Chen | Song Pan | Jun Wei | Tianquan Pan | Yixuan Wei | Yunmo Wang | Xinru Wang | Jiale Su
Volume: 2013
Year: 2013
The Effective Use of the Piston Effect, Natural Cold Sources, and Energy Saving in Beijing Subways

Author(s): Zhenzhen Li | Chao Chen | Song Pan | Le Yan | Kang Li
Volume: 2013
Year: 2013
Analytical Method for Heat Conduction Problem with Internal Heat Source in Irregular Domains

Author(s): Hongming Fan | Sen Tang | Jin Hua | Hang Yu
Volume: 2013
Year: 2013
Fault Prognostic Based on Hybrid Method of State Judgment and Regression

Author(s): Xiaobin Li | Jiansheng Qian | Gai-ge Wang
Volume: 2013
Year: 2013
Modeling, Simulation, and Experiment of Switched Reluctance Ocean Current Generator System

Author(s): Hao Chen | Xiaoxiao Zhang | Yang Xu
Volume: 2013
Year: 2013
Comparison of Structural Properties between Monopile and Tripod Offshore Wind-Turbine Support Structures

Author(s): Da Chen | Kai Huang | Valentin Bretel | Lijun Hou
Volume: 2013
Year: 2013
External Electric Field-Assisted Laser Percussion Drilling for Highly Reflective Metals

Author(s): Chao-Ching Ho | Guan-Ru Tseng | Yuan-Jen Chang | Jin-Chen Hsu | Chia-Lung Kuo
Volume: 2013
Year: 2013
Flow Visualization and Heat Transfer Characteristics of Oscillating Fluid through Pin-Fin Array in a Rectangular Channel

Author(s): Tzer-Ming Jeng | Sheng-Chung Tzeng | Wei-Ting Hsu | Guan-Wei Xu
Volume: 2013
Year: 2013
Dynamic Mechanical Behaviors of 6082-T6 Aluminum Alloy

Author(s): Peng Yibo | Wang Gang | Zhu Tianxing | Pan Shangfeng | Rong Yiming
Volume: 2013
Year: 2013
Vertical Spindle Grinding of Si and Granite with a New Abrasive Disk

Author(s): Yiqing Yu | Juan Liu | Bin Kuang | Jianyun Shen | Xipeng Xu
Volume: 2013
Year: 2013
Performance Evolution of Phytic Acid Conversion Film in the Forming Process

Author(s): Xiufang Cui | Lili Lin | Erbao Liu | Guo Jin | Jie Jin
Volume: 2013
Year: 2013
Research on the Comparison and Selection of Street Network Patterns with Gridiron Structures

Author(s): Fei Shi | Wei Wang | Jiangang Xu
Volume: 2013
Year: 2013
Convolutional Neural Network Applied to Traversability Analysis of Vehicles

Author(s): Li Linhui | Wang Mengmeng | Ding Xinli | Lian Jing | Zong Yunpeng
Volume: 2013
Year: 2013
A New Vehicle Intelligent Shift System

Author(s): Jin Hui | Ge Anlin
Volume: 2013
Year: 2013
Mechanism Simulation and Optimal Design of Five-Link Bionic Joint Driven by Two Antagonistic Pneumatic Muscles

Author(s): Binrui Wang | Yinglian Jin | Tianhong Yan | Miao Cheng
Volume: 2013
Year: 2013
Assessment of the Kinematic Parameters of Distant Noncooperative Objects

Author(s): Lovro Kuščer | Janez Diaci
Volume: 2013
Year: 2013
Conjugated Heat and Mass Transfer in Convective Drying in Compact Wood Kilns: A System Approach

Author(s): M. Vaz Jr. | P. S. B. Zdanski | R. F. Cerqueira | D. G. Possamai
Volume: 2013
Year: 2013
Mathematical Analysis of Blood Flow in Porous Tubes: A Comparative Study

Author(s): D. S. Sankar | Atulya K. Nagar
Volume: 2013
Year: 2013
Flow in a Low Specific Speed Centrifugal Pump Using PIV

Author(s): Cui Dai | Liang Dong
Volume: 2013
Year: 2013
A Sphere-Based Calibration Method for Line Structured Light Vision Sensor

Author(s): Zhenzhong Wei | Mingwei Shao | Yali Wang | Mengjie Hu
Volume: 2013
Year: 2013
Path Planning for Detection Robot Climbing on Rotor Blade Surfaces of Wind Turbine Based on Neural Network

Author(s): Binrui Wang | Haohua Luo | Yinglian Jin | Mewei He
Volume: 2013
Year: 2013
Analysis of Floating Buoy of a Wave Power Generating Jack-Up Platform Haiyuan 1

Author(s): Date Li | Detang Li | Fei Li | Jingxin Shi | Wei Zhang
Volume: 2013
Year: 2013
New Concept for Assessment of Tidal Current Energy in Jiangsu Coast, China

Author(s): Ji-Sheng Zhang | Jun Wang | Ai-Feng Tao | Jin-Hai Zheng | Hui Li
Volume: 2013
Year: 2013
Mathematical and Simulation Modelling of Moisture Diffusion Mechanism during Plastic IC Packages Disassembly

Author(s): Peng Mou | Dong Xiang | Guanghong Duan
Volume: 2013
Year: 2013
Numerical Predictions of the Incipient and Developed Interblade Vortex Lines of a Model Francis Turbine by Cavitation Calculations

Author(s): Zhigang Zuo | Shuhong Liu | Demin Liu | Daqing Qin | Yulin Wu
Volume: 2013
Year: 2013
Assessing Numerical Error in Structural Dynamics Using Energy Balance

Author(s): Rabindranath Andujar | Jaume Roset | Vojko Kilar
Volume: 2013
Year: 2013
Influence of Heat Flux and Friction Coefficient on Thermal Stresses in Risers of Drum Boilers under Dynamic Conditions of Steam Demand

Author(s): M. A. Habib | I. Alzaharnah | M. El-Shafei | N. Merah | S. Al-Anizi | M. Y. Al-Awwad | M. Hajji
Volume: 2013
Year: 2013
An Approach to Define the Heat Flow in Drilling with Different Cooling Systems Using Finite Element Analysis

Author(s): Carlos Henrique Lauro | Lincoln Cardoso Brandão | Thiago Januário Santos Vale | André Luis Christóforo
Volume: 2013
Year: 2013
Numerical Analysis of Flow Erosion on Sand Discharge Pipe in Nitrogen Drilling

Author(s): Hongjun Zhu | Yuanhua Lin | Guang Feng | Kuanhai Deng | Xiangwei Kong | Qijun Wang | Dezhi Zeng
Volume: 2013
Year: 2013
Numerical Study of Vortex-Induced Vibrations of Three Circular Cylinders in Equilateral-Triangle Arrangement

Author(s): Huakun Wang | Guoliang Yu | Wenyu Yang
Volume: 2013
Year: 2013
Nonlinear Modelling, Design, and Test of Steel Blast-Resistant Doors

Author(s): V. A. Salomoni | G. Mazzucco | G. Xotta | R. Fincato | C. E. Majorana | M. Schiavon
Volume: 2013
Year: 2013
A Method of Remaining Capacity Estimation for Lithium-Ion Battery

Author(s): Junfu Li | Lixin Wang | Chao Lyu | Weilin Luo | Kehua Ma | Liqiang Zhang
Volume: 2013
Year: 2013
Prognostics and Maintenance for Mechanical Systems in Harsh Environment

Author(s): Cheng-liang Liu | Jay Lee | Liang Gong | Yixiang Huang
Volume: 2013
Year: 2013
Predicting Cooling Loads for the Next 24 Hours Based on General Regression Neural Network: Methods and Results

Author(s): Yuying Sun | Wei Wang | Yaohua Zhao | Song Pan
Volume: 2013
Year: 2013
Experimental Study on Intelligent Control Scheme for Fan Coil Air-Conditioning System

Author(s): Yanfeng Li | Jiang Bian | Ning Zhang | Junmei Li
Volume: 2013
Year: 2013
Computer-Aided Simulations of Convective Heat Transfer in a Wedged Channel with Pin-Fins at Various Outlet Arrangements and Nonuniform Diameters

Author(s): Qitao Zhou | Xinmei Wang | Lei Li | Gongnan Xie | Fujuan Tong
Volume: 2013
Year: 2013
Multicamera Fusion-Based Leather Defects Marking System

Author(s): Chao-Ching Ho | Jheng-Ciao Li | Tzu Hsin Kuo | Chun-Chi Peng
Volume: 2013
Year: 2013
An Experimental Investigation of Residual Stresses in High-Speed End Milling 7050-T7451 Aluminum Alloy

Author(s): Xiaoming Huang | Jie Sun | Jianfeng Li | Xiong Han | Qingchun Xiong
Volume: 2013
Year: 2013
Study on the Algorithm for Train Operation Adjustment Based on Ordinal Optimization

Author(s): Yong-jun Chen | Ji-an Yu | Lei-shan Zhou | Qing Tao
Volume: 2013
Year: 2013
Mathematical Modeling and Validation on a New Valve Core of the Throttle Valve in MPD

Author(s): Y. K. Fu | Q. Y. Liu | G. R. Wang | S. Y. Tao
Volume: 2013
Year: 2013
Dynamic Analysis of Shear Flows over a Porous Medium in a Cylindrical Tube

Author(s): J. P. Dwivedi | V. P. Singh | Radha Krishna Lal
Volume: 2013
Year: 2013
EMD and Wavelet Transform Based Fault Diagnosis for Wind Turbine Gear Box

Author(s): Qingyu Yang | Dou An
Volume: 2013
Year: 2013
An Intelligent Method of Product Scheme Design Based on Product Gene

Author(s): Qing Song Ai | Yan Wang | Quan Liu
Volume: 2013
Year: 2013
Numerical Analysis of the Frictional Characteristics of a Magnetic Suspended Flying Vehicle

Author(s): Xiaoguang Wang | Yongwei Chen
Volume: 2013
Year: 2013
Particle Dispersion Behaviors of Dense Gas-Particle Flows in Bubble Fluidized Bed

Author(s): Sihao Lv | Guohui Li | Xue Liu
Volume: 2013
Year: 2013
Customer Preference-Based Information Retrieval to Build Module Concepts

Author(s): Dongxing Cao | Mandun Zhang | Zhanjun Li
Volume: 2013
Year: 2013
Finite Element Residual Stress Analysis of Planetary Gear Tooth

Author(s): Jungang Wang | Yong Wang | Zhipu Huo
Volume: 2013
Year: 2013
Fuzzy Dynamic Reliability Model of Dependent Series Mechanical Systems

Author(s): Peng Gao | Shaoze Yan
Volume: 2013
Year: 2013
Numerical Simulation of the Flow Field in Circumferential Grooved Liquid Seals

Author(s): Meng Zhang | Xiao-fang Wang | Sheng-li Xu | Wei Wang
Volume: 2013
Year: 2013
Collision Contact Characteristics for Reciprocating Pump Using FEA and Experiments

Author(s): Junfeng Pei | Chao He | Miaorong Lv | Xianru Huang | Kejun Shen | Kunlei Bi
Volume: 2013
Year: 2013
Thermal Performance Prediction of a Trapezoidal Cavity Absorber for a Linear Fresnel Reflector

Author(s): Yanhua Lai | Tao Wu | Shuping Che | Zhen Dong | Mingxin Lyu
Volume: 2013
Year: 2013
Factors That Influence Failure Behaviour and Remaining Useful Life of Mining Equipment Components

Author(s): Mark Ho | Melinda Hodkiewicz
Volume: 2013
Year: 2013
Fault Diagnosis of Rolling Bearing Based on Wavelet Package Transform and Ensemble Empirical Mode Decomposition

Author(s): Quan Liu | Fen Chen | Zude Zhou | Qin Wei
Volume: 2013
Year: 2013
Design Thinking and Cloud Manufacturing: A Study of Cloud Model Sharing Platform Based on Separated Data Log

Author(s): Zhe Wei | Yixiong Feng | Xiaoyi Wang | Zuowen Sun | Yong Sun
Volume: 2013
Year: 2013
A Novel Mechanical Component Retrieval Approach Based on Differential Moment

Author(s): Kehua Guo | Wu Liu | Hong Song
Volume: 2013
Year: 2013
Optimal Partial Reconfiguration for Permanent Fault Recovery on SRAM-Based FPGAs in Space Mission

Author(s): Jie Zhang | Yong Guan | Chunjing Mao
Volume: 2013
Year: 2013
FPGA Implementation of Real-Time Ethernet for Motion Control

Author(s): Chen Youdong | Xing Chunxiang | Tao Yong | Sun Kai
Volume: 2013
Year: 2013
Self-Assembling for Swarm Modular Robots Using MIMO Fuzzy Control

Author(s): Tianmiao Wang | Haiyuan Li | Cai Meng
Volume: 2013
Year: 2013
Investigation on the Applicability of Several Fracture Criteria to the Mixed Mode Brittle Fractures

Author(s): Li Ren | Zheming Zhu | Qinglin Yang | Ting Ai
Volume: 2013
Year: 2013
Design and Application of a Fiber Bragg Grating Tension Sensor for Anchor Rope

Author(s): Jun Huang | Zude Zhou | Dongsheng Zhang | Juntao Chen | Litong Li | Xiwang Deng
Volume: 2013
Year: 2013
A Fiber Bragg Grating Pressure Sensor and Its Application to Pipeline Leakage Detection

Author(s): Jun Huang | Zude Zhou | Dongsheng Zhang | Qin Wei
Volume: 2013
Year: 2013
Reliability Analysis of Semiactive Magnetorheological Dampers Subjected to Harmonic Excitations

Author(s): N. Mohajer Rahbari | S. Talatahari | R. Aalami
Volume: 2013
Year: 2013
A General Framework of Mechatronic Modular Architecture

Author(s): Ying Zou | Gang Zhao | Tianmiao Wang
Volume: 2013
Year: 2013
A Finite Element Removal Method for 3D Topology Optimization

Author(s): M. Akif Kütük | İbrahim Göv
Volume: 2013
Year: 2013
Virtual Reality Method of Portal Slewing Crane Based on WPF

Author(s): Jingsong Li | Quan Liu | Hang Su
Volume: 2013
Year: 2013
Modeling and Experimental Investigation of Pressure Field in the Grinding Zone with Nanoparticle Jet of MQL

Author(s): C. H. Li | Z. L. Han | Q. Zhang | S. Wang
Volume: 2013
Year: 2013
Experimental Characterisation and Modelling of Homogeneous Solid Suspension in an Industrial Stirred Tank

Author(s): Sébastien Calvo | Angélique Delafosse | Marie-Laure Collignon | Michel Crine | Dominique Toye
Volume: 2013
Year: 2013
Extended-Maxima Transform Watershed Segmentation Algorithm for Touching Corn Kernels

Author(s): Yibo Qin | Wei Wang | Wei Liu | Ning Yuan
Volume: 2013
Year: 2013
IPv6-Based Smart Metering Network for Monitoring Building Electricity

Author(s): Dong Xu | Jingmeng Liu
Volume: 2013
Year: 2013
Fluid Dynamics in a Teniente Type Copper Converter Model with One and Two Tuyeres

Author(s): Alvaro Valencia | Marco Rosales-Vera | Camilo Orellana
Volume: 2013
Year: 2013
Generalized Correlations for Heat Transfer through High Performance Fins

Author(s): A.-R. A. Khaled
Volume: 2013
Year: 2013
Natural Fiber Composites

Author(s): Hiroyuki Hamada | Johanne Denault | Amar K. Mohanty | Yan Li | Mohamed S. Aly-Hassan
Volume: 2013
Year: 2013
Look-Ahead Algorithm with Whole S-Curve Acceleration and Deceleration

Author(s): Youdong Chen | Xudong Ji | Yong Tao | Hongxing Wei
Volume: 2013
Year: 2013
A Force-Position Control System Based on Soft Tissue under Large Deformation

Author(s): Lei Hu | Jie Zhang | Changsheng Li | Yan Cui | Liquan Wang
Volume: 2013
Year: 2013
Research on Optimization for Motion Control Bus Based on Ethernet

Author(s): Kai Sun | Jie Zhang | Guangping He | Youdong Chen
Volume: 2013
Year: 2013
Finite Element Analysis Design of a Split Rotor Bracket for a Bulb Turbine Generator

Author(s): Yongyao Luo | Zhengwei Wang | Liangnian Chen | Jinshui Wu
Volume: 2013
Year: 2013
A PLIC-VOF-Based Simulation of Water-Organic Slug Flow Characteristics in a T-Shaped Microchannel

Author(s): Xian Wang | Hiroyuki Hirano | Gongnan Xie
Volume: 2013
Year: 2013
Simulation on following Performance of High-Speed Railway In Situ Testing System

Author(s): Fei-Long Zheng | Liang-Cai Zeng | Xin-Yuan Chen
Volume: 2013
Year: 2013
Advanced Stochastic Modeling of Railway Track Irregularities

Author(s): Mengyi Zhu | Xiaohui Cheng | Lixin Miao | Xinya Sun | Shuai Wang
Volume: 2013
Year: 2013
Numerical Study on the Performance of Double Layer Microchannel with Liquid Gallium and Water

Author(s): Deewakar Sharma | Harry Garg | Parbar Pratham Singh | Vinod Karar
Volume: 2013
Year: 2013
DNS Study of the Turbulent Taylor-Vortex Flow on a Ribbed Inner Cylinder

Author(s): Takahiro Tsukahara | Manabu Ishikawa | Yasuo Kawaguchi
Volume: 2013
Year: 2013
Numerical Study of Thermal Behavior in Alternating Current Light-Emitting Diodes

Author(s): Farn-Shiun Hwu | Hung-Lin Hsieh
Volume: 2013
Year: 2013
Mathematical Modeling of the High Temperature Treatment of Birch in a Prototype Furnace

Author(s): Duygu Kocaefe | Yasar Kocaefe | Ramdane Younsi | Noura Oumarou | S. Thierry Lekounougou
Volume: 2013
Year: 2013
Modeling of the Cutting Forces in Turning Process Using Various Methods of Cooling and Lubricating: An Artificial Intelligence Approach

Author(s): Djordje Cica | Branislav Sredanovic | Gordana Lakic-Globocki | Davorin Kramar
Volume: 2013
Year: 2013
Ultrasonic Motor Using Bending Modes with Single Foot

Author(s): Xiaohui Yang | Qiang Zhang | Xiangyu Zhou
Volume: 2013
Year: 2013
Overview of Ionic Liquids Used as Working Fluids in Absorption Cycles

Author(s): Mehrdad Khamooshi | Kiyan Parham | Ugur Atikol
Volume: 2013
Year: 2013
Total Energy Growth Rate of Rolling Bearing due to Faults during Run-Up

Author(s): Zhongqiu Wang | Zhencai Zhu | Wei Li | Guoan Chen | Gongbo Zhou
Volume: 2013
Year: 2013
A Rough Set Approach of Mechanical Fault Diagnosis for Five-Plunger Pump

Author(s): Jiangping Wang
Volume: 2013
Year: 2013
Temperature Dependence of Ascending Bubble-Driven Flow Patterns Found in Champagne Glasses as Determined through Numerical Modeling

Author(s): Fabien Beaumont | Catalin Popa | Gérard Liger-Belair | Guillaume Polidori
Volume: 2013
Year: 2013
Experimental Study of Damping and Energy Regeneration Characteristics of a Hydraulic Electromagnetic Shock Absorber

Author(s): Zhigang Fang | Xuexun Guo | Lin Xu | Han Zhang
Volume: 2013
Year: 2013
Design of Online Monitoring and Fault Diagnosis System for Belt Conveyors Based on Wavelet Packet Decomposition and Support Vector Machine

Author(s): Wei Li | Zewen Wang | Zhencai Zhu | Gongbo Zhou | Guoan Chen
Volume: 2013
Year: 2013
Numerical Simulation of the Transient Process of Power Failure in a Mixed Pump

Author(s): Xudan Ma | Jintao Liu | Leqin Wang
Volume: 2013
Year: 2013
Aerodynamic Performance Prediction of Straight-Bladed Vertical Axis Wind Turbine Based on CFD

Author(s): L. X. Zhang | Y. B. Liang | X. H. Liu | Q. F. Jiao | J. Guo
Volume: 2013
Year: 2013
Comparisons of LES and RANS Computations with PIV Experiments on a Cylindrical Cavity Flow

Author(s): Wen-Tao Su | Xiao-Bin Li | Feng-Chen Li | Xian-Zhu Wei | Zhi-Ying Zheng | Xin Zhang
Volume: 2013
Year: 2013
Effect of Viscoelasticity on the Natural Frequencies of Axially Moving Continua

Author(s): B. Burak Özhan | Mehmet Pakdemirli
Volume: 2013
Year: 2013
Numerical Simulation on the Food Package Temperature in Refrigerated Display Cabinet Influenced by Indoor Environment

Author(s): Chang Zhijuan | Wu Xuehong | Lu Yanli | Ma Qiuyang | Zhang Wenhui
Volume: 2013
Year: 2013
Numerical Simulation of Gas-Liquid-Solid Three-Phase Flow in Deep Wells

Author(s): Jianyu Xie | Bo Yu | Xinyu Zhang | Qianqian Shao | Xianzhi Song
Volume: 2013
Year: 2013
Error Analysis of 3D Metal Micromold Fabricated by Femtosecond Laser Cutting and Microelectric Resistance Slip Welding

Author(s): Bin Xu | Xiao-Yu Wu | Jian-Guo Lei | Feng Luo | Feng Gong | Chen-Lin Du | Xiu-Quan Sun | Shuang-Chen Ruan
Volume: 2013
Year: 2013
Detection of Early Faults in Rotating Machinery Based on Wavelet Analysis

Author(s): Meng Hee Lim | M. S. Leong
Volume: 2013
Year: 2013
Modeling and Numerical Simulation of the Grinding Temperature Field with Nanoparticle Jet of MQL

Author(s): C. H. Li | J. Y. Li | S. Wang | Q. Zhang
Volume: 2013
Year: 2013
Improved Complexity Based on Time-Frequency Analysis in Bearing Quantitative Diagnosis

Author(s): Jing Wang | Lingli Cui | Huaqing Wang | Peng Chen
Volume: 2013
Year: 2013
Performance Evaluation of a Bench-Top Precision Glass Molding Machine

Author(s): Peter Wachtel | Peiman Mosaddegh | Benn Gleason | J. David Musgraves | Kathleen Richardson
Volume: 2013
Year: 2013
Modeling and Analysing of Air Filter in Air Intake System in Automobile Engine

Author(s): R. Manikantan | E. James Gunasekaran
Volume: 2013
Year: 2013
Analysis of Dual Heat Sources in a Partially Open Enclosure

Author(s): M. McGarry | James G. Kohl
Volume: 2013
Year: 2013
Injection Moulded Biocomposites from Oat Hull and Polypropylene/Polylactide Blend: Fabrication and Performance Evaluation

Author(s): Jeevan Prasad Reddy | Manjusri Misra | Amar Mohanty
Volume: 2013
Year: 2013
Numerical Simulation of Mixed Convection in a Rotating Cylindrical Cavity: Influence of Prandtl Number

Author(s): Gustavo Urquiza | Laura Castro | Juan García | Miguel Basurto | Enoc Bogarin
Volume: 2013
Year: 2013
An Analytical Approximation for Continuous Flow Microwave Heating of Liquids

Author(s): G. Cuccurullo | L. Giordano | G. Viccione
Volume: 2013
Year: 2013
Pressure Change in Tee Branch Pipe in Oscillatory Flow

Author(s): Daisuke Sakamoto | Chongho Youn | Toshiharu Kagawa
Volume: 2013
Year: 2013
Analysis of Dry Sliding Wear Behaviour of Aluminium-Fly Ash Composites: The Taguchi Approach

Author(s): Shanmughasundaram Palanisamy | Subramanian Ramanathan | Ravikumar Rangaraj
Volume: 2013
Year: 2013
Large Eddy Simulation of Inertial Particle Preferential Dispersion in a Turbulent Flow over a Backward-Facing Step

Author(s): Bing Wang | Huiqiang Zhang | Xilin Wang
Volume: 2013
Year: 2013
Numerical Analysis of Flow around a Moving Object by an Immersed Boundary Method with the Level Set Method

Author(s): Atsuki Iijima | Tomomitsu Sato | Toshio Tagawa
Volume: 2013
Year: 2013
Research on Dynamic Models and Performances of Shield Tunnel Boring Machine Cutterhead Driving System

Author(s): Xianhong Li | Haibin Yu | Mingzhe Yuan | Yu Zhao
Volume: 2013
Year: 2013
The Polymer Effect on Nonlinear Processes in Decaying Homogeneous Isotropic Turbulence

Author(s): Wei-Hua Cai | Feng-Chen Li | Hong-Na Zhang | Yue Wang | Lu Wang
Volume: 2013
Year: 2013
Study of Dynamic Flow and Mixing Performances of Tri-Screw Extruders with Finite Element Method

Author(s): X. Z. Zhu | G. Wang | Y. D. He | Z. F. Cheng
Volume: 2013
Year: 2013
Developing Simple Production of Continuous Ramie Single Yarn Reinforced Composite Strands

Author(s): Hyun-Bum Kim | Koichi Goda | Junji Noda | Kenji Aoki
Volume: 2013
Year: 2013
Turbulence Modulation by Small Bubbles in the Vertical Upward Channel Flow

Author(s): Mingjun Pang | Jinjia Wei | Bo Yu
Volume: 2013
Year: 2013
Optimum Path Synthesis of a Geared Five-Bar Mechanism

Author(s): Wen-Yi Lin
Volume: 2013
Year: 2013
Synthetic Amplitude Spectrum and Its Extensions for Analyzing the Two Perpendicular Directional Vibration Displacement Signals of a Rotating Rotor

Author(s): Liang Yonggang | Liu Tiebing | Liu Hongxing | Si Junfeng | Huang Xiaolin | Wang Rui
Volume: 2013
Year: 2013
Research on the Controlling Parameters of Creep-Thermal Fatigue Crack

Author(s): Ming Yan | Xiang-jun Zhu | Shi-jie Wang
Volume: 2013
Year: 2013
The Processing Design of Jute Spun Yarn/PLA Braided Composite by Pultrusion Molding

Author(s): Anin Memon | Asami Nakai
Volume: 2013
Year: 2013
Stiffness Identification of Spindle-Toolholder Joint Based on Finite Difference Technique and Residual Compensation Theory

Author(s): Zhifeng Liu | Xiaolei Song | Yongsheng Zhao | Ligang Cai | Hongsheng Guo | Jianchuan Ma
Volume: 2013
Year: 2013
Effective Resistance of Gas Flow in Microchannels

Author(s): Xiao-Dong Shan | Moran Wang
Volume: 2013
Year: 2013
A Modified Model for Computation of Flows with Large Streamline Curvature

Author(s): Jun-Lian Yin | De-Zhong Wang | Yu-Lin Wu | D. Keith Walters
Volume: 2013
Year: 2013
An Approach for the Evaluation of Sphericity Error and Its Uncertainty

Author(s): Jian Mao | Man Zhao
Volume: 2013
Year: 2013
Understanding of Thermal Conductance of Thin Gas Layers

Author(s): Xiaodong Shan | Moran Wang
Volume: 2013
Year: 2013
Teaching Planetary Gear Trains with the Aid of Nomographs

Author(s): Essam Lauibi Esmail
Volume: 2013
Year: 2013
Rossby Solitary Waves Generated by Wavy Bottom in Stratified Fluids

Author(s): Hongwei Yang | Baoshu Yin | Bo Zhong | Huanhe Dong
Volume: 2013
Year: 2013
Magnetic Field Effect on Natural Convection in a Porous Cavity Heating from below and Salting from Side

Author(s): A. A. Altawallbeh | N. H. Saeid | I. Hashim
Volume: 2013
Year: 2013
Experimental Study of Ignition over Impact-Driven Supersonic Liquid Fuel Jet

Author(s): Anirut Matthujak | Kulachate Pianthong | Kazuyoshi Takayama | B. E. Milton
Volume: 2013
Year: 2013
Studies of Moisture Absorption and Release Behaviour of Akund Fiber

Author(s): Xue Yang | Liqian Huang | Longdi Cheng | Jianyong Yu
Volume: 2012
Year: 2012
Boundary Layer Flow and Heat Transfer past a Permeable Shrinking Sheet in a Nanofluid with Radiation Effect

Author(s): Khairy Zaimi | Anuar Ishak | Ioan Pop
Volume: 2012
Year: 2012
Fatigue Reliability Assessment of Steel Member Using Probabilistic Stress-Life Method

Author(s): Dae-Hung Kang | Changhwan Jang | Yeon-Soo Park | Suk-Yeol Han | Jin Ho Kim
Volume: 2012
Year: 2012
Mechanical, Thermal Degradation, and Flammability Studies on Surface Modified Sisal Fiber Reinforced Recycled Polypropylene Composites

Author(s): Arun Kumar Gupta | Manoranjan Biswal | S. Mohanty | S. K. Nayak
Volume: 2012
Year: 2012
Vertical Vibration Model for Unsteady Lubrication in Rolls-Strip Interface of Cold Rolling Mills

Author(s): Xu Yang | Qing Li | Chao-nan Tong | Qi-han Liu
Volume: 2012
Year: 2012
FSI Simulation of Common Carotid under Normal and High Blood Pressures

Author(s): S. M. Abdul Khader | Anurag Ayachit | B. Raghuvir Pai | V. R. K. Rao | S. Ganesh Kamath
Volume: 2012
Year: 2012
Effect of Red Mud and Copper Slag Particles on Physical and Mechanical Properties of Bamboo-Fiber-Reinforced Epoxy Composites

Author(s): Sandhyarani Biswas | Amar Patnaik | Ritesh Kaundal
Volume: 2012
Year: 2012
Experimental Validation of Volume of Fluid Method for a Sluice Gate Flow

Author(s): A. A. Oner | M. S. Akoz | M. S. Kirkgoz | V. Gumus
Volume: 2012
Year: 2012
Using Neural Network for Determination of Viscosity in Water-TiO2 Nanofluid

Author(s): Mehdi Bahiraei | Seyed Mostafa Hosseinalipour | Kaveh Zabihi | Ehsan Taheran
Volume: 2012
Year: 2012
Experimental Study on Chaotic Mixing Created by a New Type of Mixer with Rotational Blades

Author(s): Payam Rahim Mashaei | Seyed Mostafa Hosseinalipour | Norouz Mohammad Nouri | Mohammad el Jawad Muslmani
Volume: 2012
Year: 2012
Comparative Modal Analysis of Gasketed and Nongasketed Bolted Flanged Pipe Joints: FEA Approach

Author(s): Muhammad Abid | Shahid Maqsood | Hafiz Abdul Wajid
Volume: 2012
Year: 2012
Experimental Study of the Cooling of Electrical Components Using Water Film Evaporation

Author(s): S. Harmand | D. Pérez Gil | S. Zouitene | L. Remmerie | T. Benazzouz | F. Cardarelli
Volume: 2012
Year: 2012
Performance Evaluation of /Water Nanofluid as Coolant in a Double-Tube Heat Exchanger Flowing under a Turbulent Flow Regime

Author(s): Navid Bozorgan | Mostafa Mafi | Nariman Bozorgan
Volume: 2012
Year: 2012
Fault Severity Estimation of Rotating Machinery Based on Residual Signals

Author(s): Fan Jiang | Wei Li | Zhongqiu Wang | Zhencai Zhu
Volume: 2012
Year: 2012
Slip Flow in Elliptic Microducts with Constant Heat Flux

Author(s): Marco Spiga | Pamela Vocale
Volume: 2012
Year: 2012
Modeling and Computation of Heat Transfer through Permeable Hollow-Pin Systems

Author(s): A.-R. A. Khaled
Volume: 2012
Year: 2012
Mechanical Properties of Natural Jute Fabric/Jute Mat Fiber Reinforced Polymer Matrix Hybrid Composites

Author(s): Elsayed A. Elbadry | Mohamed S. Aly-Hassan | Hiroyuki Hamada
Volume: 2012
Year: 2012
Life Assessment and Life Extension of an Aircraft Wheel

Author(s): M. Aghaie-Khafri | M. Amin | A. H. Momeni
Volume: 2012
Year: 2012
Power Balancing of Inline Multicylinder Diesel Engine

Author(s): S. H. Gawande | L. G. Navale | M. R. Nandgaonkar
Volume: 2012
Year: 2012
Influence of Process Parameters on Microhardness of Electroless Ni-B Coatings

Author(s): Suman Kalyan Das | Prasanta Sahoo
Volume: 2012
Year: 2012
Modeling of Tooling-Workpiece Interactions on Random Surfaces

Author(s): Hitesh Kataria | Andres L. Carrano | Brian K. Thorn
Volume: 2012
Year: 2012
Development of a Wheelchair with a Lifting Function

Author(s): Yoshikazu Mori | Norikatsu Sakai | Kaoru Katsumura
Volume: 2012
Year: 2012
Fuzzy-Based Evaluation of a Specific Drive Train

Author(s): Attila Piros | Zsolt Farkas
Volume: 2012
Year: 2012
Mechanical Properties of Ti-6Al-4V Octahedral Porous Material Unit Formed by Selective Laser Melting

Author(s): Jianfeng Sun | Yongqiang Yang | Di Wang
Volume: 2012
Year: 2012
Pure Nano-Rotation Scanner

Author(s): Moo-Yeon Lee | Eun-Joo Park | Jeong-Kuk Yeom | Dong-Pyo Hong | Dong-Yeon Lee
Volume: 2012
Year: 2012
Projectile Nose Mass Abrasion of High-Speed Penetration into Concrete

Author(s): Haijun Wu | Fei Qian | Fenglei Huang | Yinan Wang
Volume: 2012
Year: 2012
MHD Free Convection and Mass Transfer Flow from a Vertical Plate in the Presence of Hall and Ion-Slip Current

Author(s): Koushik Dash | Mahmud Alam | Mohammad Wahiduzzaman
Volume: 2012
Year: 2012
Numerical Analysis of Mixed Convection through an Internally Finned Tube

Author(s): Sachindra Kumar Rout | Dipti Prasad Mishra | Dhirendra Nath Thatoi | Asit Ku. Acharya
Volume: 2012
Year: 2012
Numerical Analysis of Oscillation Death in Coupled Self-Excited Elastic Beams

Author(s): Miguel A. Barron | Isaias Hilerio | Gabriel Plascencia
Volume: 2012
Year: 2012
Experimental Investigation on Power Output in Aged Wind Turbines

Author(s): N. Murugan | M. Umamaheswari | SI. Vimal | P. Sivashanmugam
Volume: 2012
Year: 2012
The Critical Height of a Liquid Being Drained from the Tank with Bell-Mouth Drain Port

Author(s): J. Mohammadi | H. Karimi | M. Islami | M. H. Hamedi
Volume: 2012
Year: 2012
Utilization of Bio-Oil for Cooking and Lighting

Author(s): P. K. Halder | M. U. H. Joardder | M. R. A. Beg | N. Paul | I. Ullah
Volume: 2012
Year: 2012
Review of Techniques for Fault Diagnosis in Damaged Structure and Engineering System

Author(s): Dhirendra Nath Thatoi | Harish Ch. Das | Dayal R. Parhi
Volume: 2012
Year: 2012
Choosing Actuation Scheme for Optimal Performance of 3-DOF Planar Parallel Manipulators

Author(s): S. Ramana Babu | V. Ramachandra Raju | K. Ramji
Volume: 2012
Year: 2012
Temperature Estimation in the Combustion Chamber of an Internal Combustion Engine

Author(s): Gholam Reza Safakish
Volume: 2012
Year: 2012
Computational Fluid Dynamics Modeling to Improve Natural Flow Rate and Sweet Pepper Productivity in Greenhouse

Author(s): W. Limtrakarn | P. Boonmongkol | A. Chompupoung | K. Rungprateepthaworn | J. Kruenate | P. Dechaumphai
Volume: 2012
Year: 2012
Heat Transfer in Nanofluids 2012

Author(s): Yogesh Jaluria | Oronzio Manca | Dimos Poulikakos | Kambiz Vafai | Liqiu Wang
Volume: 2012
Year: 2012
A Heuristic Scheduling Algorithm for Minimizing Makespan and Idle Time in a Nagare Cell

Author(s): M. Muthukumaran | S. Muthu
Volume: 2012
Year: 2012
Measurement and Model Validation of Nanofluid Specific Heat Capacity with Differential Scanning Calorimetry

Author(s): Harry O'Hanley | Jacopo Buongiorno | Thomas McKrell | Lin-wen Hu
Volume: 2012
Year: 2012
Molecular Dynamics Simulations of Pressure-Driven Flows and Comparison with Acceleration-Driven Flows

Author(s): Quy Dong To | Thanh Tung Pham | Guy Lauriat | Céline Léonard
Volume: 2012
Year: 2012
Graph-Theoretic Approach for the Dynamic Simulation of Flexible Multibody Systems

Author(s): M. J. Richard | M. Bouazara
Volume: 2012
Year: 2012
Modeling and Calibration for Crack Detection in Circular Shafts Supported on Bearings Using Lateral and Torsional Vibration Measurements

Author(s): A. Tlaisi | A. S. J. Swamidas | M. R. Haddara | A. Akinturk
Volume: 2012
Year: 2012
Enhancing Heat Transfer of Drag-Reducing Surfactant Solution by anHEV Static Mixer with Low Pressure Drop

Author(s): Haifeng Shi | Yi Wang | Wu Ge | Bo Fang | Jacob T. Huggins | Thaddaus R. Huber | Jacques L. Zakin
Volume: 2011
Year: 2011
Evaluation of Surfactant Drag Reduction Effect in a District Heating System

Author(s): Ning Ma | Jinjia Wei | Jianfeng Wang
Volume: 2011
Year: 2011
A Simulation Technology for a Full Cycle of Steel Line Pipe Manufacturing Operations

Author(s): Vladimir V. Aleshin | Viacheslav V. Kobyakov | Vadim E. Seleznev
Volume: 2011
Year: 2011
Evaluation of Hole Quality in Hardened Steel with High-Speed Drilling Using Different Cooling Systems

Author(s): Lincoln Cardoso Brandão | Frederico Ozanan Neves | Gregório Christo Nocelli
Volume: 2011
Year: 2011
Synthesis of Five-Bar Slider Mechanism with Variable Topology for Finitely Separated Positions

Author(s): Umesh M. Daivagna | Shrinivas S. Balli
Volume: 2011
Year: 2011
Characteristics of Embedded-Shock-Free Compressible Vortex Rings: A Detailed Study Using PIV

Author(s): C. Lakshmana Dora | D. Saravanan | K. Karunakar | Debopam Das
Volume: 2011
Year: 2011
Effects of Delta-Shaped Obstacles on the Thermal Performance of Solar Air Heater

Author(s): Adisu Bekele | Manish Mishra | Sushanta Dutta
Volume: 2011
Year: 2011
Remarks on Constitutive Modeling of Nanofluids

Author(s): Mehrdad Massoudi | Tran X. Phuoc
Volume: 2012
Year: 2012
Natural Convection of Nanofluids in a Square Enclosure with a Protruding Heater

Author(s): J. Guiet | M. Reggio | P. Vasseur
Volume: 2012
Year: 2012
Experimental Investigation on Zonal Structure in Drag-Reducing Channel Flow with Surfactant Additives

Author(s): Masaaki Motozawa | Takahiro Watanabe | Weiguo Gu | Yasuo Kawaguchi
Volume: 2011
Year: 2011
Review on Drag Reduction and Its Heat Transfer by Additives

Author(s): Yi Wang | Bo Yu | Jacques L. Zakin | Haifeng Shi
Volume: 2011
Year: 2011
Analysis of Zero Reynolds Shear Stress Appearing in Dilute Surfactant Drag-Reducing Flow

Author(s): Weiguo Gu | Dezhong Wang | Yasuo Kawaguchi
Volume: 2011
Year: 2011
Drag Reduction of Turbulent Flow by Additives

Author(s): Jinjia Wei | Yasuo Kawaguchi | Bo Yu
Volume: 2011
Year: 2011
Multiple-Scale Interactions Affecting Tropical Cyclone Track Changes

Author(s): Zhexian Luo | Noel E. Davidson | Fan Ping | Weican Zhou
Volume: 2011
Year: 2011
A Comparative Study of Biologically Inspired Walking Gaits through Waypoint Navigation

Author(s): Umar Asif | Javaid Iqbal
Volume: 2011
Year: 2011
Biomechanical Study of the Pullout Resistance in Screws of a Vertebral Fixation System

Author(s): Sarah F. Fakhouri | Ariane Zamarioli | Célia R. G. Wichr | Cleudmar A. Araujo | Helton L. A. Defino | Antônio C. Shimano
Volume: 2011
Year: 2011
Meshless Local Petrov-Galerkin Method for 3D Steady-State Heat Conduction Problems

Author(s): M. J. Mahmoodabadi | R. Abedzadeh Maafi | A. Bagheri | G. H. Baradaran
Volume: 2011
Year: 2011
Experimental Study of the Freezing Point of γ-Al2O3/Water Nanofluid

Author(s): Thierry Maré | Ousmane Sow | Salma Halelfadl | Sylvain Lebourlout | Cong Tam Nguyen
Volume: 2012
Year: 2012
Experimental Investigation of the Energy Needs for a Conventionally and an Infrared-Heated Greenhouse

Author(s): A. Kavga | G. Alexopoulos | V. Bontozoglou | S. Pantelakis | Th. Panidis
Volume: 2012
Year: 2012
The Utilization of Waste Date Seed as Bio-Oil and Activated Carbon by Pyrolysis Process

Author(s): Mohammad Uzzal Hossain Joardder | Md. Shazib Uddin | Mohammad Nurul Islam
Volume: 2012
Year: 2012
On Relationships among the Aggregation Number, Rheological Property, and Turbulent Drag-Reducing Effect of Surfactant Solutions

Author(s): Ying-Bo Zhou | Na Xu | Ning Ma | Feng-Chen Li | Jin-Jia Wei | Bo Yu
Volume: 2011
Year: 2011
Drag Reduction of Bacterial Cellulose Suspensions

Author(s): Satoshi Ogata | Tetsuya Numakawa | Takuya Kubo
Volume: 2011
Year: 2011
Metallic Light Absorbers Produced by Femtosecond Laser Pulses

Author(s): Anatoliy Y. Vorobyev | Chunlei Guo
Volume: 2010
Year: 2010
Lower-Mobility Parallel Robots: Theory and Applications

Author(s): Zhen Huang | Fengfeng (Jeff) Xi | Tian Huang | Jian Sheng Dai | Rosario Sinatra
Volume: 2010
Year: 2010
Water-Based Fe2O3 Nanofluid Characterization: Thermal Conductivity and Viscosity Measurements and Correlation

Author(s): L. Colla | L. Fedele | M. Scattolini | S. Bobbo
Volume: 2012
Year: 2012
Numerical Study of Laminar Confined Impinging Slot Jets with Nanofluids

Author(s): Giuseppe Di Lorenzo | Oronzio Manca | Sergio Nardini | Daniele Ricci
Volume: 2012
Year: 2012
Numerical Investigation on Mixed Convection in Triangular Cross-Section Ducts with Nanofluids

Author(s): Oronzio Manca | Sergio Nardini | Daniele Ricci | Salvatore Tamburrino
Volume: 2012
Year: 2012
Performance of PVD-Coated Carbide Tools When Turning Inconel 718 in Dry Machining

Author(s): Gusri Akhyar Ibrahim | Che Hassan Che Haron | Jaharah Abdul Ghani | Ahmad Yasir Moh. Said | Moh. Zaid Abu Yazid
Volume: 2011
Year: 2011
Effect of Ferrofluid on the Performance and Emission Patterns of a Four-Stroke Diesel Engine

Author(s): M. B. Shafii | F. Daneshvar | N. Jahani | K. Mobini
Volume: 2011
Year: 2011
Performance of Cableless Magnetic In-Piping Actuator Capable of High-Speed Movement by Means of Inertial Force

Author(s): Hiroyuki Yaguchi | Tomohiro Izumikawa
Volume: 2011
Year: 2011
Using Artificial Neural Network for Predicting Impurity Concentration in Solid Diffusion Process under Insufficient Input Parameters

Author(s): Iyad M. Muslih | Mohammad A. Mansour | Saleem Z. Ramadan
Volume: 2011
Year: 2011
Static Analysis of Functionally Graded Piezoelectric Beams under Thermo-Electro-Mechanical Loads

Author(s): Amin Komeili | Abdol Hamid Akbarzadeh | Arezou Doroushi | Mohammad Reza Eslami
Volume: 2011
Year: 2011
Yarn Strength Prediction: A Practical Model Based on Artificial Neural Networks

Author(s): Rocco Furferi | Maurizio Gelli
Volume: 2010
Year: 2010
CFD Investigation on 3-Dimensional Interference of a Five-Hole Probe in an Automotive Wheel Arch

Author(s): V. Malviya | R. Mishra | E. Palmer
Volume: 2010
Year: 2010
Diesel Engine Valve Clearance Detection Using Acoustic Emission

Author(s): Fathi Elamin | Yibo Fan | Fengshou Gu | Andrew Ball
Volume: 2010
Year: 2010
A Continuum Model for Water Transport in the Ionomer-Phase of Catalyst Coated Membranes for PEMFCs

Author(s): Vladimir Gurau | J. Adin Mann
Volume: 2010
Year: 2010
Effect of Localized Heating on Three-Dimensional Flat-Plate Oscillating Heat Pipe

Author(s): S. M. Thompson | H. B. Ma
Volume: 2010
Year: 2010
Heat Transfer Mechanisms and Clustering in Nanofluids

Author(s): Kaufui V. Wong | Michael J. Castillo
Volume: 2010
Year: 2010
Applications of Nanofluids: Current and Future

Author(s): Kaufui V. Wong | Omar De Leon
Volume: 2010
Year: 2010
Study of the Effect of Reduced Iron Temperature Rising on Total Carbon Formation in Iron Reactor Isobaric and Cooling Zone

Author(s): Bayu Alamsari | Shuichi Torii | Azis Trianto | Yazid Bindar
Volume: 2010
Year: 2010
Kinetostatic and Inertial Conditioning of the McGill Schönflies-Motion Generator

Author(s): Alessandro Cammarata | Jorge Angeles | Rosario Sinatra
Volume: 2010
Year: 2010
On the Beams with External Auxetic Patches

Author(s): Veturia Chiroiu | Ligia Munteanu | Ştefania Donescu
Volume: 2009
Year: 2009
Investigation on Stone Machining Performance Using Force and Specific Energy

Author(s): S. Turchetta | W. Polini | I. S. Buyuksagis
Volume: 2009
Year: 2009
Experimental Investigations on the Effects of Cerium Oxide Nanoparticle Fuel Additives on Biodiesel

Author(s): V. Sajith | C. B. Sobhan | G. P. Peterson
Volume: 2010
Year: 2010
Optimal Design and Development of a Decoupled A/B-Axis Tool Head with Parallel Kinematics

Author(s): Fugui Xie | Xin-Jun Liu | Li-Ping Wang | Jinsong Wang
Volume: 2010
Year: 2010
Kinetostatic Analysis of 4-R(CRR) Parallel Manipulator with Overconstraints via Reciprocal-Screw Theory

Author(s): Zhen Huang | Yan Zhao | Jingfang Liu
Volume: 2010
Year: 2010
Effects of Particle Surface Charge, Species, Concentration, and Dispersion Method on the Thermal Conductivity of Nanofluids

Author(s): Raghu Gowda | Hongwei Sun | Pengtao Wang | Majid Charmchi | Fan Gao | Zhiyong Gu | Bridgette Budhlall
Volume: 2010
Year: 2010
Field Synergy Principle for Energy Conservation Analysis and Application

Author(s): Qun Chen | Moran Wang | Zeng-Yuan Guo
Volume: 2010
Year: 2010
Experimental and Numerical Study on the Cold Start Performance of a Single PEM Fuel Cell

Author(s): Calvin H. Li | G. P. Peterson
Volume: 2010
Year: 2010
A Compliant PKM Mesomanipulator: Kinematic and Dynamic Analyses

Author(s): C. Amici | A. Borboni | R. Faglia
Volume: 2010
Year: 2010
On the Specific Heat Capacity of CuO Nanofluid

Author(s): Le-Ping Zhou | Bu-Xuan Wang | Xiao-Feng Peng | Xiao-Ze Du | Yong-Ping Yang
Volume: 2010
Year: 2010
An Investigation into the Different Hardening Models in Reverse Forming of Thin Sheets

Author(s): M. Kadkhodayan | J. Mosayebi
Volume: 2009
Year: 2009
The Expand Probability Analysis of a Surrounding Large Truss-Board Antenna

Author(s): Jianguo Zhang | Jianjun Chen | Taibin Hu
Volume: 2009
Year: 2009
Modeling of Configuration-Dependent Flexible Joints for a Parallel Robot

Author(s): Zili Zhou | Chris K. Mechefske | Fengfeng Xi
Volume: 2010
Year: 2010
On the Behavior of Fiberglass Epoxy Composites under Low Velocity Impact Loading

Author(s): Gautam S. Chandekar | Bhushan S. Thatte | Ajit D. Kelkar
Volume: 2010
Year: 2010
Homogenization Topology Optimization Method Based on Continuous Field

Author(s): Hongwei Zhao | Kai Long | Z.-D. Ma
Volume: 2010
Year: 2010
Combustion of Syngas Fuel in Gas Turbine Can Combustor

Author(s): Chaouki Ghenai
Volume: 2010
Year: 2010
Abruption Cross-Section and Bending Change of ACSR Energy Lines in Fire Environment

Author(s): C. D. Halevidis | S. D. Anagnostatos | A. D. Polykrati | E. I. Koufakis | P. D. Bourkas
Volume: 2010
Year: 2010
Affiliate Program      Why do you need a reservation system?