Academic Journals Database
Disseminating quality controlled scientific knowledge

Advances in Materials Science and Engineering

ISSN: 1687--8434
Publisher: Hindawi Publishing Corporation


ADD TO MY LIST
 
Study of Alloying Process on 40Cr Surface with Electron Beam after Electroplated Cr Layer

Author(s): Xu Hongbin | Hu Jianjun | Li Hui | Mao Rongshan | Sun Fei | Hou Tianfeng
Volume: 2013
Year: 2013
Deposition of Low Stress Silicon Nitride Thin Film and Its Application in Surface Micromachining Device Structures

Author(s): Beirong Zheng | Chen Zhou | Quan Wang | Yifeng Chen | Wei Xue
Volume: 2013
Year: 2013
Scaling Analysis of the Tensile Strength of Bamboo Fibers Using Weibull Statistics

Author(s): Jiaxing Shao | Fang Wang | Lu Li | Junqian Zhang
Volume: 2013
Year: 2013
Effect of Cation Distribution on Structural and Magnetic Properties of Nickel Cobalt Zinc Ferrites

Author(s): S. J. Azhagushanmugam | N. Suriyanarayanan | R. Jayaprakash
Volume: 2013
Year: 2013
Analysis on the Manufacturing of an AA5083 Straight Blade Previously ECAE Processed

Author(s): Daniel Salcedo | Carmelo Luis | Ignacio Puertas | Javier León | Juan Pablo Fuertes | Rodrigo Luri
Volume: 2013
Year: 2013
Enhancing Microstructure and Mechanical Properties of AZ31-MWCNT Nanocomposites through Mechanical Alloying

Author(s): J. Jayakumar | B. K. Raghunath | T. H. Rao
Volume: 2013
Year: 2013
Performance of Hybrid Steel Fibers Reinforced Concrete Subjected to Air Blast Loading

Author(s): Mohammed Alias Yusof | Norazman Mohamad Nor | Ariffin Ismail | Ng Choy Peng | Risby Mohd Sohaimi | Muhammad Azani Yahya
Volume: 2013
Year: 2013
Comparative Performance of PLZT and PVDF Pyroelectric Sensors Used to the Thermal Characterization of Liquid Samples

Author(s): Gemima Lara Hernandez | Alfredo Cruz-Orea | Ernesto Suaste Gomez | Jose Jesus Agustin Flores Cuautle
Volume: 2013
Year: 2013
Effect of Environmental Degradation on Mechanical Properties of Kenaf/Polyethylene Terephthalate Fiber Reinforced Polyoxymethylene Hybrid Composite

Author(s): Mohamad Zaki Abdullah | Yakubu Dan-mallam | Puteri Sri Melor Megat Yusoff
Volume: 2013
Year: 2013
A Study on Contact Fatigue Performance of Nitrided and TiN Coated Gears

Author(s): Hongbin Xu | Hui Li | Jianjun Hu | Song Wang
Volume: 2013
Year: 2013
Mechanical Performance Evaluation of Concrete Beams Strengthened with Carbon Fiber Materials

Author(s): Jun Ding | Xia Huang | Gang Zhu | Song Chen | Guochao Wang
Volume: 2013
Year: 2013
CFD Study on Wall/Nanoparticle Interaction in Nanofluids Convective Heat Transfer

Author(s): Mohammad Reza Tarybakhsh | Ali Akbar Lotfi Neyestanak | Hamed Tarybakhsh
Volume: 2013
Year: 2013
Geometry Optimization Calculations for the Elasticity of Gold at High Pressure

Author(s): E. Güler | M. Güler
Volume: 2013
Year: 2013
Modelling the Influence of Manufacturing Process Variables on Dimensional Changes of Porcelain Tiles

Author(s): Dolly Santos-Barbosa | Dachamir Hotza | Juan Boix | Gustavo Mallol
Volume: 2013
Year: 2013
Synergistic Flame Retardancy of Aluminium Dipropylphosphinate and Melamine in Polyamide 6

Author(s): Linsheng Tang | Zhigang Yuan | Lu Xu | Xue Li | Yuzhen Ge
Volume: 2013
Year: 2013
An Alternative to Clay in Building Materials: Red Mud Sintering Using Fly Ash via Taguchi’s Methodology

Author(s): Suchita Rai | Dilip H. Lataye | M. J. Chaddha | R. S. Mishra | P. Mahendiran | J. Mukhopadhyay | ChangKyoo Yoo | Kailas L. Wasewar
Volume: 2013
Year: 2013
Effect of Soil Burial on Tensile Properties of Polypropylene/Plasticized Cassava Starch Blends

Author(s): Henry C. Obasi | Isaac O. Igwe | Innocent C. Madufor
Volume: 2013
Year: 2013
Novel Optical Fiber Dynamic Light Scattering Measurement System for Nanometer Particle Size

Author(s): Zhemin Chen | Pengbing Hu | Qingqiang Meng | Xinyong Dong
Volume: 2013
Year: 2013
The Spot Weldability of Carbon Steel Sheet

Author(s): A. M. Al-Mukhtar | Q. Doos
Volume: 2013
Year: 2013
Damage Characterization of Polypropylene Honeycomb Sandwich Panels Subjected to Low-Velocity Impact

Author(s): Freeda A. Amir | A. R. Othman | H. Md. Akil
Volume: 2013
Year: 2013
Application of Electron Beam Melting to the Removal of Phosphorus from Silicon: Toward Production of Solar-Grade Silicon by Metallurgical Processes

Author(s): Hideaki Sasaki | Yoshifumi Kobashi | Takashi Nagai | Masafumi Maeda
Volume: 2013
Year: 2013
Deformation Properties and Fatigue of Bituminous Mixtures

Author(s): Frantisek Schlosser | Jan Mikolaj | Viera Zatkalikova | Juraj Sramek | Dominika Durekova | Lubos Remek
Volume: 2013
Year: 2013
Effect of Magnesium Sulphate on Self-Compacting Concrete Containing Supplementary Cementitious Materials

Author(s): Aiad Hassan | Hilmi Bin Mahmud | Mohd. Zamin Jumaat | Belal ALsubari | Aziz Abdulla
Volume: 2013
Year: 2013
Application of Macrofiber Composite for Smart Transducer of Lamb Wave Inspection

Author(s): Gang Ren | Kyung-Young Jhang
Volume: 2013
Year: 2013
Electromechanical Characterization and Locomotion Control of IPMC BioMicroRobot

Author(s): Martin J.-D. Otis
Volume: 2013
Year: 2013
An Experimental Simulation to Validate FEM to Predict Transverse Young’s Modulus of FRP Composites

Author(s): V. S. Sai | M. R. S. Satyanarayana | V. B. K. Murthy | G. S. Rao | A. S. Prasad
Volume: 2013
Year: 2013
Aerogels in Aerospace: An Overview

Author(s): Nadiir Bheekhun | Abd. Rahim Abu Talib | Mohd Roshdi Hassan
Volume: 2013
Year: 2013
Studies on the Potential of Waste Soda Lime Silica Glass in Glass Ionomer Cement Production

Author(s): V. W. Francis Thoo | N. Zainuddin | K. A. Matori | S. A. Abdullah
Volume: 2013
Year: 2013
Dynamic Shear Characteristic and Fracture Feature of Inconel 690 Alloy under Different High Strain Rates and Temperatures

Author(s): Tao-Hsing Chen | Chih-Kai Tsai | Te-Hua Fang
Volume: 2013
Year: 2013
Multifunction of Ni/Ag Nanocompound Fluid

Author(s): Mu-Jung Kao
Volume: 2013
Year: 2013
Evaluation of Ultrasonic Nonlinear Characteristics in Heat-Treated Aluminum Alloy (Al-Mg-Si-Cu)

Author(s): JongBeom Kim | Kyung-Young Jhang
Volume: 2013
Year: 2013
Modelling of Ballistic Impact over a Ceramic-Metal Protection System

Author(s): Leandro Neckel | Dachamir Hotza | Daniel Stainer | Rolf Janssen | Hazim Ali Al-Qureshi
Volume: 2013
Year: 2013
An Experimental Study on Heat Conduction and Thermal Contact Resistance for the AlN Flake

Author(s): Huann-Ming Chou | Jin-Chi Wang | Yuh-Ping Chang
Volume: 2013
Year: 2013
Electric and Magnetic Properties of Sputter Deposited BiFeO3 Films

Author(s): N. Siadou | I. Panagiotopoulos | N. Kourkoumelis | T. Bakas | K. Brintakis | A. Lappas
Volume: 2013
Year: 2013
Preparation of Organic-Inorganic Hybrid Materials Based on MCM-41 and Its Applications

Author(s): Sana M. Alahmadi | Sharifah Mohamad | Mohd Jamil Maah
Volume: 2013
Year: 2013
SmBa2NbO6 Nanopowders, an Effective Percolation Network Medium for YBCO Superconductors

Author(s): S. Vidya | K. C. Mathai | P. P. Rejith | Sam Solomon | J. K. Thomas
Volume: 2013
Year: 2013
Charge-Trapping Devices Using Multilayered Dielectrics for Nonvolatile Memory Applications

Author(s): Wen-Chieh Shih | Chih-Hao Cheng | Joseph Ya-min Lee | Fu-Chien Chiu
Volume: 2013
Year: 2013
A Nonlocal Model for Carbon Nanotubes under Axial Loads

Author(s): Raffaele Barretta | Francesco Marotti de Sciarra
Volume: 2013
Year: 2013
Design and Analytical Evaluation of a New Self-Centering Connection with Bolted T-Stub Devices

Author(s): Mahbobeh Mirzaie Aliabadi | Mohammad Reza Bahaari | Shahabeddin Torabian
Volume: 2013
Year: 2013
Defect Study of MgO-CaO Material Doped with CeO2

Author(s): Han Zhang | Huizhong Zhao | Jinfeng Chen | Jingjie Li | Jun Yu | Jianhua Nie
Volume: 2013
Year: 2013
Study of the Boson Peak and Fragility of Bioprotectant Glass-Forming Mixtures by Neutron Scattering

Author(s): F. Migliardo | S. Magazù | M. A. Gonzalez | C. Mondelli
Volume: 2013
Year: 2013
High Pressure Elastic Behavior of Synthetic Mg3Y2(SiO4)3 Garnet up to 9 GPa

Author(s): Dawei Fan | Maining Ma | Shuyi Wei | Zhiqiang Chen | Hongsen Xie
Volume: 2013
Year: 2013
Laser Treatment of Wood Surfaces for Ski Cores: An Experimental Parameter Study

Author(s): Alexander Petutschnigg | Michael Stöckler | Florian Steinwendner | Julian Schnepps | Herwig Gütler | Johann Blinzer | Helmut Holzer | Thomas Schnabel
Volume: 2013
Year: 2013
Preparation of Biodegradable Silk Fibroin/Alginate Blend Films for Controlled Release of Antimicrobial Drugs

Author(s): Yaowalak Srisuwan | Yodthong Baimark
Volume: 2013
Year: 2013
Microstructural Investigations of Rapidly Solidified Al-Co-Y Alloys

Author(s): B. Avar | M. Gogebakan | M. Tarakci | Y. Gencer | S. Kerli
Volume: 2013
Year: 2013
Characterization of Metal Oxide-Based Gas Nanosensors and Microsensors Fabricated via Local Anodic Oxidation Using Atomic Force Microscopy

Author(s): Bráulio S. Archanjo | Pablo F. Siles | Camilla K. B. Q. M. Oliveira | Daniel L. Baptista | Bernardo R. A. Neves
Volume: 2013
Year: 2013
Performance Evaluation of Crumb Rubber Modified Stone Mastic Asphalt Pavement in Malaysia

Author(s): Nuha Salim Mashaan | Asim H. Ali | Suhana Koting | Mohamed Rehan Karim
Volume: 2013
Year: 2013
Research on the Static Recrystallization and Precipitation Behaviors of a V-N Microalloyed Steel

Author(s): Baochun Zhao | Tan Zhao | Guiyan Li | Qiang Lu
Volume: 2013
Year: 2013
Development and Performance Evaluation of Very High Early Strength Geopolymer for Rapid Road Repair

Author(s): Abideng Hawa | Danupon Tonnayopas | Woraphot Prachasaree | Pichai Taneerananon
Volume: 2013
Year: 2013
Effects of Excess Cu Addition on Photochromic Properties of AgCl-Urethane Resin Composite Films

Author(s): Hidetoshi Miyazaki | Hirochi Shimoguchi | Hiroki Nakayama | Hisao Suzuki | Toshitaka Ota
Volume: 2013
Year: 2013
High Temperature Deformation Behavior of 8090 Al-Li Alloy

Author(s): Woo Young Jung | Tae Kwon Ha
Volume: 2013
Year: 2013
White-Ceramic Conversion on Ti-29Nb-13Ta-4.6Zr Surface for Dental Applications

Author(s): Akiko Obata | Eri Miura-Fujiwara | Akimitsu Shimizu | Hirotaka Maeda | Masaaki Nakai | Yoshimi Watanabe | Mitsuo Niinomi | Toshihiro Kasuga
Volume: 2013
Year: 2013
Characterisation and Properties of Lithium Disilicate Glass Ceramics in the SiO2-Li2O-K2O-Al2O3 System for Dental Applications

Author(s): Naruporn Monmaturapoj | Pornchanok Lawita | Witoon Thepsuwan
Volume: 2013
Year: 2013
Modeling, Characterization, and Processing of Advanced Composites

Author(s): Philip Harrison | Abbas S. Milani | Roham Rafiee
Volume: 2013
Year: 2013
Incorporation of Functionalized Multiwall Carbon Nanotubes into a Polyurethane Matrix

Author(s): Martin Michálek | Michael Bredol
Volume: 2013
Year: 2013
Direct Synthesis of (K0.5Na0.5)NbO3 Powders by Mechanochemical Method

Author(s): Nguyen Duc Van
Volume: 2013
Year: 2013
Characteristics of Carbon Nanospheres Prepared from Locally Deoiled Asphalt

Author(s): Mohammed Ibrahim Mohammed | Raheek Ismaeel Ibrahim | Luma Hussein Mahmoud | Mumtaz Abdulahad Zablouk | Neeran Manweel | Abeer Mahmoud
Volume: 2013
Year: 2013
Electrospun Polymer-Fiber Solar Cell

Author(s): Shinobu Nagata | Gary M. Atkinson | Dmitry Pestov | Gary C. Tepper | James T. Mcleskey
Volume: 2013
Year: 2013
Analysis of the Dynamic Response in Blast-Loaded CFRP-Strengthened Metallic Beams

Author(s): Zhenyu Wang | Yang Zhao | Xu Liang | Zhiguo He
Volume: 2013
Year: 2013
Challenges of the Modeling Methods for Investigating the Interaction between the CNT and the Surrounding Polymer

Author(s): Roham Rafiee | Timon Rabczuk | Reza Pourazizi | Junhua Zhao | Yancheng Zhang
Volume: 2013
Year: 2013
Mechanical Characterization of Cryomilled Al Powder Consolidated by High-Frequency Induction Heat Sintering

Author(s): Ehab A. El-Danaf | Mahmoud S. Soliman | Abdulhakim A. Almajid | Khalil Abdelrazek Khalil
Volume: 2013
Year: 2013
A Review on Tribological Behaviour of Polymeric Composites and Future Reinforcements

Author(s): B. Aldousiri | A. Shalwan | C. W. Chin
Volume: 2013
Year: 2013
Sustainable Use of Tepetate Composite in Earthen Structure

Author(s): T. López-Lara | Juan Bosco Hernandez-Zaragoza | Jaime Horta | Eduardo Rojas Gonzalez | Carlos Lopez-Cajun | Gerson Ramirez
Volume: 2013
Year: 2013
Stress-Softening and Residual Strain Effects in Suture Materials

Author(s): Alex Elías-Zúñiga | Beatriz Montoya | Wendy Ortega-Lara | Eduardo Flores-Villalba | Ciro A. Rodríguez | Hector R. Siller | José A. Díaz-Elizondo | Oscar Martínez-Romero
Volume: 2013
Year: 2013
Redistribution and Effect of Various Elements on the Morphology of Primary Graphite in Cast Iron

Author(s): J. Lacaze | N. Valle | K. Theuwissen | J. Sertucha | B. El Adib | L. Laffont
Volume: 2013
Year: 2013
Impact Toughness and Ductility Enhancement of Biodegradable Poly(lactic acid)/Poly(ε-caprolactone) Blends via Addition of Glycidyl Methacrylate

Author(s): Wei Kit Chee | Nor Azowa Ibrahim | Norhazlin Zainuddin | Mohd Faizal Abd Rahman | Buong Woei Chieng
Volume: 2013
Year: 2013
Improving Barrier Properties of PET by Depositing a Layer of DLC Films on Surface

Author(s): Zhiguo Zhang | Riheng Song | Guoneng Li | Guilin Hu | Yaoyu Sun
Volume: 2013
Year: 2013
Manufacture of Green-Composite Sandwich Structures with Basalt Fiber and Bioepoxy Resin

Author(s): J. P. Torres | R. Hoto | J. Andrés | J. A. García-Manrique
Volume: 2013
Year: 2013
Materials Selection, Synthesis, and Dielectrical Properties of PVC Nanocomposites

Author(s): Youssef Mobarak | M. Bassyouni | M. Almutawa
Volume: 2013
Year: 2013
A Humidity Sensor Based on Silver Nanoparticles Thin Film Prepared by Electrostatic Spray Deposition Process

Author(s): Thutiyaporn Thiwawong | Korakot Onlaor | Benchapol Tunhoo
Volume: 2013
Year: 2013
Fluorescent Thiol-Derivatized Gold Clusters Embedded in Polymers

Author(s): G. Carotenuto | S. De Nicola | L. Nicolais
Volume: 2013
Year: 2013
Microtomographic Analysis of Impact Damage in FRP Composite Laminates: A Comparative Study

Author(s): M. Alemi-Ardakani | A. S. Milani | S. Yannacopoulos | L. Bichler | D. Trudel-Boucher | G. Shokouhi | H. Borazghi
Volume: 2013
Year: 2013
Optimization of Ni-Based WC/Co/Cr Composite Coatings Produced by Multilayer Laser Cladding

Author(s): Andrea Angelastro | Sabina L. Campanelli | Giuseppe Casalino | Antonio D. Ludovico
Volume: 2013
Year: 2013
Morphology and In Vitro Behavior of Electrospun Fibrous Poly(D,L-lactic acid) for Biomedical Applications

Author(s): Toshihiro Inami | Yasuhiro Tanimoto | Masayuki Ueda | Yo Shibata | Satoshi Hirayama | Masaru Yamaguchi | Kazutaka Kasai
Volume: 2013
Year: 2013
Mechanical Properties of Palm Fibre Reinforced Recycled HDPE

Author(s): B. Aldousiri | M. Alajmi | A. Shalwan
Volume: 2013
Year: 2013
Study on Tensile Properties of Nanoreinforced Epoxy Polymer: Macroscopic Experiments and Nanoscale FEM Simulation Prediction

Author(s): Zhenqing Wang | Fang Liu | Wenyan Liang | Limin Zhou
Volume: 2013
Year: 2013
Structural and Morphological Characterization of Micro and Nanofibers Produced by Electrospinning and Solution Blow Spinning: A Comparative Study

Author(s): Juliano E. Oliveira | Luiz H. C. Mattoso | William J. Orts | Eliton S. Medeiros
Volume: 2013
Year: 2013
Wood versus Plant Fibers: Similarities and Differences in Composite Applications

Author(s): Bo Madsen | E. Kristofer Gamstedt
Volume: 2013
Year: 2013
Effect of Ground Waste Concrete Powder on Cement Properties

Author(s): Xianwei Ma | Zhenyu Wang
Volume: 2013
Year: 2013
Biopolymer Doped with Titanium Dioxide Superhydrophobic Photocatalysis as Self-Clean Coating for Lightweight Composite

Author(s): Anika Zafiah M. Rus | S. R. Mohid | S. Nurulsaidatulsyida | N. Marsi
Volume: 2013
Year: 2013
Improvement of Dispersion and Color Effect of Organic Pigments in Polymeric Films via Microencapsulation by the Miniemulsion Technique

Author(s): Dongming Qi | Zhijie Chen | Lei Yang | Zhihai Cao | Minghua Wu
Volume: 2013
Year: 2013
Pressure Dependence of the Electrical Resistivity in Polymer Polyaniline

Author(s): Daihui Huang | Dong Xie | Jingjing Gao | Wangchun Lv | Shiming Hong
Volume: 2013
Year: 2013
The Effect of Annealing on the Structural and Optical Properties of Titanium Dioxide Films Deposited by Electron Beam Assisted PVD

Author(s): Yaser M. Abdulraheem | Sahar Ghoraishi | Lidia Arockia-Thai | Suji K. Zachariah | Moustafa Ghannam
Volume: 2013
Year: 2013
Study on Thixojoining Process Using Partial Remelting Method

Author(s): M. N. Mohammed | M. Z. Omar | M. S. Salleh | K. S. Alhawari
Volume: 2013
Year: 2013
The Behavior of Masonry Walls with Reinforced Plaster Mortar

Author(s): Hakan Basaran | Ali Demir | Muhiddin Bagci
Volume: 2013
Year: 2013
Investigation of Rock Failure Pattern in Creep by Digital Speckle Correlation Method

Author(s): Yunliang Tan | Yanchun Yin | Tongbin Zhao
Volume: 2013
Year: 2013
Reinforcement of Recycled Foamed Asphalt Using Short Polypropylene Fibers

Author(s): Yongjoo Kim | Tae-Soon Park
Volume: 2013
Year: 2013
Microstructural Study of Neodmium Nickelate Doped with Strontium Synthesized by Gelatin Method

Author(s): R. M. P. B. Oliveira | P. M. Pimentel | J. H. Araújo | D. M. A. Melo | M. A. F. Melo | A. E. Martinelli
Volume: 2013
Year: 2013
Structural and Optical Properties of Chemical Bath Deposited Silver Oxide Thin Films: Role of Deposition Time

Author(s): A. C. Nwanya | P. E. Ugwuoke | B. A. Ezekoye | R. U. Osuji | F. I. Ezema
Volume: 2013
Year: 2013
Stay-in-Place Formwork of TRC Designed as Shear Reinforcement for Concrete Beams

Author(s): S. Verbruggen | O. Remy | J. Wastiels | T. Tysmans
Volume: 2013
Year: 2013
Thermal and Cure Kinetics of Epoxy Molding Compounds Cured with Thermal Latency Accelerators

Author(s): Chean-Cheng Su | Chien-Huan Wei | Bo-Ching Li
Volume: 2013
Year: 2013
Study on Microchannel Design and Burst Frequency Detection for Centrifugal Microfluidic System

Author(s): Yaw-Jen Chang | Shia-Chung Chen | Cheng-Li Hsu
Volume: 2013
Year: 2013
Investigations of Physical and Rheological Properties of Aged Rubberised Bitumen

Author(s): Asim Hassan Ali | Nuha S. Mashaan | Mohamed Rehan Karim
Volume: 2013
Year: 2013
A Review of Structural Performance of Oil Palm Empty Fruit Bunch Fiber in Polymer Composites

Author(s): Reza Mahjoub | Jamaludin Bin Mohamad Yatim | Abdul Rahman Mohd Sam
Volume: 2013
Year: 2013
Terahertz Wave Approach and Application on FRP Composites

Author(s): Kwang-Hee Im | David K. Hsu | Chien-Ping Chiou | Daniel J. Barnard | Jong-An Jung | In-Young Yang
Volume: 2013
Year: 2013
Processing and Validation of Whey-Protein-Coated Films and Laminates at Semi-Industrial Scale as Novel Recyclable Food Packaging Materials with Excellent Barrier Properties

Author(s): E. Bugnicourt | M. Schmid | O. Mc. Nerney | J. Wildner | L. Smykala | A. Lazzeri | P. Cinelli
Volume: 2013
Year: 2013
Evaluation of PE Films Having NIR-Reflective Additives for Greenhouse Applications in Arid Regions

Author(s): Syed K. H. Gulrez | Ahmed M. Abdel-Ghany | Ibrahim M. Al-Helal | Saeed M. Al-Zaharani | Abdullah A. Alsadon
Volume: 2013
Year: 2013
Behavior of Concrete Columns Repaired with Polymer Mortar and Epoxy Fiber Panel

Author(s): Sungnam Hong | Sun-Kyu Park
Volume: 2013
Year: 2013
Curing Pressure Influence of Out-of-Autoclave Processing on Structural Composites for Commercial Aviation

Author(s): Vasileios M. Drakonakis | James C. Seferis | Charalambos C. Doumanidis
Volume: 2013
Year: 2013
Reduction of Maximum and Residual Drifts on Posttensioned Steel Frames with Semirigid Connections

Author(s): Arturo López-Barraza | Edén Bojórquez | Sonia E. Ruiz | Alfredo Reyes-Salazar
Volume: 2013
Year: 2013
The Effect of Operational Cutting Parameters on Nitinol-60 in Wire Electrodischarge Machining

Author(s): Ali Akbar LotfiNeyestanak | Saeed Daneshmand
Volume: 2013
Year: 2013
Degradation in Seawater of Structural Adhesives for Hybrid Fibre-Metal Laminated Materials

Author(s): Cristina Alia | María V. Biezma | Paz Pinilla | José M. Arenas | Juan C. Suárez
Volume: 2013
Year: 2013
Impact Behavior of Recycled Aggregate Concrete Based on Split Hopkinson Pressure Bar Tests

Author(s): Yubin Lu | Xing Chen | Xiao Teng | Shu Zhang
Volume: 2013
Year: 2013
Interfacial Reaction of Sn-Ag-Cu Lead-Free Solder Alloy on Cu: A Review

Author(s): Liu Mei Lee | Ahmad Azmin Mohamad
Volume: 2013
Year: 2013
Compression of Multilayered Composite Electrospun Scaffolds: A Novel Strategy to Rapidly Enhance Mechanical Properties and Three Dimensionality of Bone Scaffolds

Author(s): Parthasarathy A. Madurantakam | Isaac A. Rodriguez | Koyal Garg | Jennifer M. McCool | Peter C. Moon | Gary L. Bowlin
Volume: 2013
Year: 2013
Effects of Clay and Moisture Content on Direct Shear Tests for Clay-Sand Mixtures

Author(s): Muawia A. Dafalla
Volume: 2013
Year: 2013
Effect of Cobalt Fillers on Polyurethane Segmentations Investigated by Synchrotron Small Angle X-Ray Scattering

Author(s): Krit Koyvanich | Chitnarong Sirisathitkul | Supagorn Rugmai
Volume: 2013
Year: 2013
On the Inertia Term of Projectile's Penetration Resistance

Author(s): Yu Shan | Haijun Wu | Fenglei Huang | Jinzhu Li
Volume: 2013
Year: 2013
Photocatalytic Materials

Author(s): Guohua Jiang | Tao Chen | Qiang Yang
Volume: 2012
Year: 2012
Luminescence and Structure of ZnO Grown by Physical Vapor Deposition

Author(s): R. García-Gutiérrez | M. Barboza-Flores | D. Berman-Mendoza | R. Rangel-Segura | O. E. Contreras-López
Volume: 2012
Year: 2012
Numerical Tools for Composite Woven Fabric Preforming

Author(s): Abel Cherouat | Houman Bourouchaki
Volume: 2013
Year: 2013
Corrosion of Mechanically Alloyed Nanostructured FeAl Intermetallic Powders

Author(s): A. Torres-Islas | C. Carachure | S. Serna | B. Campillo | G. Rosas
Volume: 2012
Year: 2012
Simple Method to Synthesize Functionalized Carbon Nanotubes Employing Cobalt Nitrate and Acetone by Using Spray Pyrolysis Deposition Technique

Author(s): Jorge A. Gómez | Alfredo Marquez | Antonino Pérez | A. Duarte-Moller
Volume: 2012
Year: 2012
Optical and Physical Properties of Methyltrimethoxysilane Transparent Film Incorporated with Nanoparticles

Author(s): W. Ahliah Ismail | Zainal Abidin Ali | R. Puteh
Volume: 2012
Year: 2012
The Influence of Hydroxylated Carbon Nanotubes on Epoxy Resin Composites

Author(s): Jiaoxia Zhang | Yaping Zheng | Haijun Zhou | Jing Zhang | Jun Zou
Volume: 2012
Year: 2012
Solar Energy: Materials, Devices, and Applications

Author(s): Ru-Yuan Yang | Yu-Pei Huang | Nowshad Amin | Fengqiang Sun
Volume: 2012
Year: 2012
Segregation of Cu-In-S Elements in the Spray-Pyrolysis-Deposited Layer of CIS Solar Cells

Author(s): Seigo Ito | Toshihiro Ryo
Volume: 2012
Year: 2012
Experimental Study on the Compressive Strength of Big Mobility Concrete with Nondestructive Testing Method

Author(s): Huai-Shuai Shang | Ting-Hua Yi | Lu-Sheng Yang
Volume: 2012
Year: 2012
Integral Solution of the Interface Profile of Grain Boundary Grooving by Surface Diffusion

Author(s): Caifang Wang | Hui Xing | Fengping Yao | Changle Chen | Jianyuan Wang | Fei Fan
Volume: 2012
Year: 2012
Materials, Devices, Fabrication, Characterization, and Applications for OLED Illumination and Display

Author(s): Jwo-Huei Jou | Yong Qiu | Saulius Grigalevicius | Etienne Baranoff
Volume: 2012
Year: 2012
Optimum Design of Fibre Orientation in Composite Laminate Plates for Out-Plane Stresses

Author(s): Rasoul Khandan | Siamak Noroozi | Philip Sewell | John Vinney | Mehran Koohgilani
Volume: 2012
Year: 2012
Recent Advances in the Deposition of Diamond Coatings on Co-Cemented Tungsten Carbides

Author(s): R. Polini | M. Barletta | G. Rubino | S. Vesco
Volume: 2012
Year: 2012
A Phenomenological Thermal-Mechanical Viscoelastic Constitutive Modeling for Polypropylene Wood Composites

Author(s): Xiongqi Peng | Hongling Yin | Jun Chen | Xue Liu
Volume: 2012
Year: 2012
Performance Evaluation of Warm- and Hot-Mix Asphalt Mixtures Based on Laboratory and Accelerated Pavement Tests

Author(s): Yongjoo Kim | Jaejun Lee | Cheolmin Baek | Sunglin Yang | Sooahn Kwon | Youngchan Suh
Volume: 2012
Year: 2012
Development of Alternative Glass Ceramic Seal for a Planar Solid Oxide Fuel Cell

Author(s): P. Lemes-Rachadel | H. Birol | A. P. N. Oliveira | D. Hotza
Volume: 2012
Year: 2012
Mn-Rich Nanostructures in : Fabrication, Microstructure, and Magnetic Properties

Author(s): Ying Jiang | Yong Wang
Volume: 2012
Year: 2012
Elastomeric Polymers for Retrofitting of Reinforced Concrete Structures against the Explosive Effects of Blast

Author(s): S. N. Raman | T. Ngo | P. Mendis | T. Pham
Volume: 2012
Year: 2012
Study of Ruthenium Complex Sensitizer and Gold Nanoparticles Doped Flexible Organic Solar Cells

Author(s): Cheng-Chiang Chen | Lung-Chien Chen
Volume: 2012
Year: 2012
Series Resistance Analysis of Passivated Emitter Rear Contact Cells Patterned Using Inkjet Printing

Author(s): Martha A. T. Lenio | James Howard | Doris (Pei Hsuan) Lu | Fabian Jentschke | Yael Augarten | Alison Lennon | Stuart R. Wenham
Volume: 2012
Year: 2012
Performance Degradation of Dye-Sensitized Solar Cells Induced by Electrolytes

Author(s): Ru-Yuan Yang | Huang-Yu Chen | Fu-Der Lai
Volume: 2012
Year: 2012
Effects of Organic Compounds on Microstructure, Optical, and Electrical Properties of ITO Thin Films Prepared by Dip-Coating Method

Author(s): Ru-Yuan Yang | Cheng-Jye Chu | Yu-Ming Peng | Hui-Ju Chueng
Volume: 2012
Year: 2012
A Molecular Dynamics Study on the Constraint Conditions of the Particle Growth Process in Laser Synthesis of Nanopowders

Author(s): Shiwei Zhang | Jun Liu | Zhijun Zhang | Wenhui Zhang
Volume: 2012
Year: 2012
Relationship between Rheological Behaviour and Final Structure of Al

Author(s): S. Y. Gómez | O. A. Alvarez | J. A. Escobar | J. B. Rodrigues Neto | C. R. Rambo | D. Hotza
Volume: 2012
Year: 2012
New Surface Properties in Porcelain Gres Tiles with a Look to Human and Environmental Safety

Author(s): C. L. Bianchi | C. Pirola | S. Gatto | S. Nucci | A. Minguzzi | G. Cerrato | S. Biella | V. Capucci
Volume: 2012
Year: 2012
Dispersion Behavior of Gold-Nanocoated Dielectric Optical Fibers

Author(s): P. K. Choudhury
Volume: 2012
Year: 2012
Preparation of Nanosized

Author(s): Hyun Soo Kim | No-Kuk Park | Tae Jin Lee | Myeong-Heon Um | Misook Kang
Volume: 2012
Year: 2012
A Review of Metallic Bipolar Plates for Proton Exchange Membrane Fuel Cells: Materials and Fabrication Methods

Author(s): Shahram Karimi | Norman Fraser | Bronwyn Roberts | Frank R. Foulkes
Volume: 2012
Year: 2012
The Relationship between Secondary Structure and Biodegradation Behavior of Silk Fibroin Scaffolds

Author(s): Yongpei Hu | Qin Zhang | Renchuan You | Lingshuang Wang | Mingzhong Li
Volume: 2012
Year: 2012
The Influence of Na and Ti on the In Vitro Degradation and Bioactivity in 58S Sol-Gel Bioactive Glass

Author(s): Shirong Ni | Ruilin Du | Siyu Ni
Volume: 2012
Year: 2012
Experimental Study on Solar Cooling Tube Using Thermal/Vacuum Emptying Method

Author(s): Huizhong Zhao | Haibin Liang | Wenzhe Sun | Guoqing Yu | Dan Cao | Jun Ji
Volume: 2012
Year: 2012
Simulation and System Design of a 3D Metrology Optical System Based on a Bidirectional OLED Microdisplay

Author(s): Constanze Großmann | Ute Gawronski | Martin Breibarth | Gunther Notni | Andreas Tünnermann
Volume: 2012
Year: 2012
Control of Crystallinity in Nanocrystalline Silicon Prepared by High Working Pressure Plasma-Enhanced Chemical Vapor Deposition

Author(s): Jung-Dae Kwon | Kee-Seok Nam | Yongsoo Jeong | Dong-Ho Kim | Sung-Gyu Park | Si-Young Choi
Volume: 2012
Year: 2012
The Role of pH in PEG-b-PAAc Modification of Gadolinium Oxide Nanostructures for Biomedical Applications

Author(s): Eva Hemmer | Nallusamy Venkatachalam | Hiroshi Hyodo | Kohei Soga
Volume: 2012
Year: 2012
Hydrogen Storage Enhancement Attained by Fixation of Ti on MWNTs

Author(s): J. J. Pérez-Bueno | M. L. Mendoza López | K. M. Brieño Enriquez | J. Ledesma García | L. A. Godínez Mora-Tovar | C. Angeles Chavez
Volume: 2012
Year: 2012
Structural and Phase Transformations in Water-Vapour-Plasma-Treated Hydrophilic TiO2 Films

Author(s): L. Pranevicius | M. Urbonavicius | S. Tuckute | K. Gedvilas | T. Rajackas | L. L. Pranevicius | D. Milcius
Volume: 2012
Year: 2012
Coating and Characterization of Mock and Explosive Materials

Author(s): Emily M. Hunt | Matt Jackson
Volume: 2012
Year: 2012
Enhancing the Out-Coupling Efficiency of Organic Light-Emitting Diodes Using Two-Dimensional Periodic Nanostructures

Author(s): Qingyang Yue | Wei Li | Fanmin Kong | Kang Li
Volume: 2012
Year: 2012
Durability Index Performance of High Strength Concretes Made Based on Different Standard Portland Cements

Author(s): Stephen O. Ekolu | Sheena Murugan
Volume: 2012
Year: 2012
Enhancement of Efficiency and Lifetime of Blue Organic Light-Emitting Diodes Using Two Dopants in Single Emitting Layer

Author(s): Jianning Yu | Na Wei | Chong Li | Bin Wei | Wei Huang | Taiju Tsuboi | Jianhua Zhang | Zhilin Zhang
Volume: 2012
Year: 2012
High and Low Temperature Properties of FT-Paraffin-Modified Bitumen

Author(s): Hassan Fazaeli | Hamid Behbahani | Amir Ali Amini | Jafar Rahmani | Golazin Yadollahi
Volume: 2012
Year: 2012
Polystyrene Backbone Polymers Consisting of Alkyl-Substituted Triazine Side Groups for Phosphorescent OLEDs

Author(s): Beatrice Ch. D. Salert | Armin Wedel | Lutz Grubert | Thomas Eberle | Rémi Anémian | Hartmut Krueger
Volume: 2012
Year: 2012
Reactive Chemical Vapor Deposition Method as New Approach for Obtaining Electroluminescent Thin Film Materials

Author(s): Valentina V. Utochnikova | Oxana V. Kotova | Andrey A. Vaschenko | Leonid S. Lepnev | Alexei G. Vitukhnovsky | Natalia P. Kuzmina
Volume: 2012
Year: 2012
Efficiency Control in Iridium Complex-Based Phosphorescent Light-Emitting Diodes

Author(s): Boucar Diouf | Woo Sik Jeon | Ramchandra Pode | Jang Hyuk Kwon
Volume: 2012
Year: 2012
Research on Fire Resistance of Ultra-High-Performance Concrete

Author(s): Hao-wen Ye | Nai-qian Feng | Yan Ling-hu | Zhi-wei Ran | Li-xun Lin | Shi-kun Qi | Yi Dong
Volume: 2012
Year: 2012
Fourier Transform Infrared Radiation Spectroscopy Applied for Wood Rot Decay and Mould Fungi Growth Detection

Author(s): Bjørn Petter Jelle | Per Jostein Hovde
Volume: 2012
Year: 2012
Rapid Synthesis of Dittmarite by Microwave-Assisted Hydrothermal Method

Author(s): Lai zhenyu | Qian Jueshi | Lu Zhongyuan | Li Qian | Zou Qiulin
Volume: 2012
Year: 2012
Investigations of Accelerated Climate Aged Wood Substrates by Fourier Transform Infrared Material Characterization

Author(s): Bjørn Petter Jelle | Petra Rüther | Per Jostein Hovde
Volume: 2012
Year: 2012
Optimization of Nano-TiO2 Photocatalytic Reactor for Organophosphorus Degradation

Author(s): Ilin Sadeghi | Pooya Arbab | Mahdi Fathizadeh | Hoseen Fakhraee | Mahdi Amrollahi
Volume: 2012
Year: 2012
Photocatalytic Degradation of Dichlorvos in Visible Light by Mg2+-TiO2 Nanocatalyst

Author(s): T. Siva Rao | Teshome Abdo Segne | T. Susmitha | A. Balaram Kiran | C. Subrahmanyam
Volume: 2012
Year: 2012
Treatment of Color Filter Wastewater by Fresnel Lens Enhanced Solar Photo-Fenton Process

Author(s): Wen-shiuh Kuo | Chia-ling Wu
Volume: 2012
Year: 2012
Study on Surface Heat Budget of Various Pavements for Urban Heat Island Mitigation

Author(s): Hideki Takebayashi | Masakazu Moriyama
Volume: 2012
Year: 2012
The Compressive Strength of High-Performance Concrete and Ultrahigh-Performance

Author(s): E. H. Kadri | S. Aggoun | S. Kenai | A. Kaci
Volume: 2012
Year: 2012
Uniaxial Bond Stress-Slip Relationship of Reinforcing Bars in Concrete

Author(s): Sungnam Hong | Sun-Kyu Park
Volume: 2012
Year: 2012
Use of UHPC in Bridge Structures: Material Modeling and Design

Author(s): Oguz Gunes | Seda Yesilmen | Burcu Gunes | Franz-Joseph Ulm
Volume: 2012
Year: 2012
Flexural Behavior of Extruded DFRCC Panel and Reinforced Concrete Composite Slab

Author(s): Chang-Geun Cho | Bang Yeon Lee | Yun Yong Kim | Byung-Chan Han | Seung-Jung Lee
Volume: 2012
Year: 2012
Experimental Testing of the Effects of Fine Particles on the Properties of the Self-Compacting Lightweight Concrete

Author(s): Sandra Juradin | Goran Baloević | Alen Harapin
Volume: 2012
Year: 2012
Experimental Research on Fire Resistance of Reactive Powder Concrete

Author(s): Gai-Fei Peng | Yi-Rong Kang | Yan-Zhu Huang | Xiao-Ping Liu | Qiang Chen
Volume: 2012
Year: 2012
Research on Fracture Toughness of C120 Ultra-High-Performance Concrete in Kingkey Financial Center Project

Author(s): Hao-Wen Ye | Nai-Qian Feng | Zhi-Wei Ran | Li-Xun Lin | Yan Ling-Hu | Shi-Kun Qi | Yi Dong
Volume: 2012
Year: 2012
Attachment and Proliferation of Osteoblasts on Lithium-Hydroxyapatite Composites

Author(s): Ana Paula M. Shainberg | Patrícia Valério | Alessandra Zonari | Faik N. Oktar | Lutfiye S. Ozyegin | Manuel Pedro F. Graça | Maria F. Leite | Alfredo M. Goes
Volume: 2012
Year: 2012
The Comparison of Biocompatibility Properties between Ti Alloys and Fluorinated Diamond-Like Carbon Films

Author(s): Chavin Jongwannasiri | Nutthanun Moolsradoo | Anak Khantachawana | Pongpan Kaewtatip | Shuichi Watanabe
Volume: 2012
Year: 2012
Rock Mechanical Property Influenced by Inhomogeneity

Author(s): Yunliang Tan | Dongmei Huang | Ze Zhang
Volume: 2012
Year: 2012
Simulation of Electronic Structure of Aluminum Phosphide Nanocrystals Using Ab Initio Large Unit Cell Method

Author(s): Hamad R. Jappor | Zeyad Adnan Saleh | Mudar A. Abdulsattar
Volume: 2012
Year: 2012
Synthesis and Characterization of Nickel-Alumina Composites from Recycled Nickel Powder

Author(s): V. G. Karayannis | A. K. Moutsatsou
Volume: 2012
Year: 2012
Effects of Aging Temperature on Moisture Absorption of Perforated GFRP

Author(s): Shiva Eslami | Fathollah Taheri-Behrooz | Farid Taheri
Volume: 2012
Year: 2012
Stress Corrosion Cracking of Steel and Aluminum in Sodium Hydroxide: Field Failure and Laboratory Test

Author(s): Y. Prawoto | K. Sumeru | W. B. Wan Nik
Volume: 2012
Year: 2012
Photocatalytic Properties of Columnar Nanostructured TiO2 Films Fabricated by Sputtering Ti and Subsequent Annealing

Author(s): Zhengcao Li | Liping Xing | Zhengjun Zhang
Volume: 2012
Year: 2012
Comparison of Gelation Time and Polyalcohol Effect on Hydrogels from Domestic and Wild Silk Fibroins

Author(s): Huijing Zhao | Siyong Xiong | Mingzhong Li | Qiang Zhang | Guiyang Liu
Volume: 2012
Year: 2012
The Effect of Ultrasonic Treatment on Thermal Stability of the Cured Epoxy/Layered Silicate Nanocomposite

Author(s): N. Y. Yuhana | S. Ahmad | A. R. Shamsul Bahri
Volume: 2012
Year: 2012
Electrical Properties of a CeO2-Bi2O3 Mix System Elaborated at 600°C

Author(s): Lamia Bourja | Bahcine Bakiz | Abdeljalil Benlhachemi | Mohamed Ezahri | Sylvie Villain | Claude Favotto | Jean-Raymond Gavarri
Volume: 2012
Year: 2012
Microstructural Evolution in Materials during Thermal Processing

Author(s): Joseph K. L. Lai | Brian Ralph | Zhiwen Chen | Kin Ho Lo
Volume: 2012
Year: 2012
Preparation and Photocatalytic Activity of Magnetic Fe3O4/SiO2/TiO2 Composites

Author(s): Rijing Wang | Xiaohong Wang | Xiaoguang Xi | Ruanbing Hu | Guohua Jiang
Volume: 2012
Year: 2012
Synthesis and Characterization of Fe-N-S-tri-Doped TiO2 Photocatalyst and Its Enhanced Visible Light Photocatalytic Activity

Author(s): Biying Li | Xiuwen Cheng | Xiujuan Yu | Lei Yan | Zipeng Xing
Volume: 2012
Year: 2012
Modification, Synthesis, and Analysis of Advanced Materials Using Ion Beam Techniques

Author(s): Adam Georg Balogh | Koumei Baba | David D. Cohen | Robert G. Elliman | Wolfgang Ensinger | Joseph Gyulai
Volume: 2012
Year: 2012
Lanthanum Influence on EuAlO3 Perovskite Structural Properties: Experimental and Molecular Dynamics Studies

Author(s): Enrique Lima | María Elena Villafuerte-Castrejón | José Saniger | Victor Lara | Jorge E. Sánchez-Sánchez | Luis Javier Álvarez
Volume: 2012
Year: 2012
Study on Burr Formation at the Top Edge in Rectangular Groove Cutting

Author(s): Wen Jun Deng | Zi Chun Xie | Ping Lin | Tong Kui Xu
Volume: 2012
Year: 2012
Self-Healing Materials Systems: Overview of Major Approaches and Recent Developed Technologies

Author(s): B. Aïssa | D. Therriault | E. Haddad | W. Jamroz
Volume: 2012
Year: 2012
Synthesis of Photochromic AgCl-Urethane Resin Composite Films

Author(s): Hidetoshi Miyazaki | Hirochi Shimoguchi | Hisao Suzuki | Toshitaka Ota
Volume: 2012
Year: 2012
Application of PEI-Modified Magnetic Nanoparticles as Gene Transfer Vector for the Genetic Modification of Animals

Author(s): Jinhui Cui | Haixin Cui | Yan Wang | Changjiao Sun | Kui Li | Hongyan Ren | Wei Du
Volume: 2012
Year: 2012
Combustion Synthesis of Fe-Incorporated SnO2 Nanoparticles Using Organometallic Precursor Combination

Author(s): Thomas K. Barkley | Jenna E. Vastano | James R. Applegate | Smitesh D. Bakrania
Volume: 2012
Year: 2012
Effect of PVP Intermediate Layer on the Properties of SAPO 34 Membrane

Author(s): Jugal K. Das | Nandini Das | Sibdas Bandyopadhyay
Volume: 2012
Year: 2012
Influence of Doping Concentration on Dielectric, Optical, and Morphological Properties of PMMA Thin Films

Author(s): Lyly Nyl Ismail | Habibah Zulkefle | Sukreen Hana Herman | Mohamad Rusop Mahmood
Volume: 2012
Year: 2012
Radiation Effects in Nuclear Ceramics

Author(s): L. Thomé | S. Moll | A. Debelle | F. Garrido | G. Sattonnay | J. Jagielski
Volume: 2012
Year: 2012
TEM Study of High-Temperature Precipitation of Delta Phase in Inconel 718 Alloy

Author(s): Moukrane Dehmas | Jacques Lacaze | Aliou Niang | Bernard Viguier
Volume: 2011
Year: 2011
γ′ Precipitation and Growth Kinetics in Mechanically Alloyed Ni–Al

Author(s): QingXin Tang | Shigeharu Ukai | Akinobu Minami | Shigenari Hayashi
Volume: 2011
Year: 2011
Young's Modulus and Coefficient of Linear Thermal Expansion of ZnO Conductive and Transparent Ultra-Thin Films

Author(s): Naoki Yamamoto | Hisao Makino | Tetsuya Yamamoto
Volume: 2011
Year: 2011
Direct Laser Cladding of Cobalt on Ti-6Al-4V with a Compositionally Graded Interface

Author(s): Jyotsna Dutta Majumdar
Volume: 2011
Year: 2011
Precise Hole Drilling in PMMA Using 1064 nm Diode Laser CNC Machine

Author(s): Jinan A. Abdulnabi | Thaier A. Tawfiq | Anwaar A. Al-Dergazly | Ziad A. Taha | Khalil I. Hajim
Volume: 2011
Year: 2011
Near UV-Blue Excitable Green-Emitting Nanocrystalline Oxide

Author(s): C. E. Rodríguez-García | N. Perea-López | G. A. Hirata
Volume: 2011
Year: 2011
Analysis of the Indentation Size Effect in the Microhardness Measurements in B6O

Author(s): Ronald Machaka | Trevor E. Derry | Iakovos Sigalas | Mathias Herrmann
Volume: 2011
Year: 2011
Thermal Stability and Tribological Performance of DLC-Si–O Films

Author(s): Nutthanun Moolsradoo | Shinya Abe | Shuichi Watanabe
Volume: 2011
Year: 2011
The Influence of Pores on Irradiation Property of Selected Nuclear Graphites

Author(s): Zhengcao Li | Dongyue Chen | Xiaogang Fu | Wei Miao | Zhengjun Zhang
Volume: 2012
Year: 2012
Preparation and Properties of Ag-Containing Diamond-Like Carbon Films by Magnetron Plasma Source Ion Implantation

Author(s): K. Baba | R. Hatada | S. Flege | W. Ensinger
Volume: 2012
Year: 2012
Hydrogen Charging Effects in Pd/Ti/TiO2 /Ti Thin FilmsDeposited on Si(111) Studied by Ion Beam Analysis Methods

Author(s): K. Drogowska | S. Flege | C. Schmitt | D. Rogalla | H.-W. Becker | Nhu-T. H. Kim-Ngan | A. Brudnik | Z. Tarnawski | K. Zakrzewska | M. Marszałek | A. G. Balogh
Volume: 2012
Year: 2012
High Spatial Resolution Time-of-Flight Secondary Ion Mass Spectrometry for the Masses: A Novel Orthogonal ToF FIB-SIMS Instrument with In Situ AFM

Author(s): James A. Whitby | Fredrik Östlund | Peter Horvath | Mihai Gabureac | Jessica L. Riesterer | Ivo Utke | Markus Hohl | Libor Sedláček | Jaroslav Jiruše | Vinzenz Friedli | Mikhael Bechelany | Johann Michler
Volume: 2012
Year: 2012
Thermal Effect on Structure of Silver in Ion-Exchanged Soda-Lime Glasses and Aluminum-Doped Zinc Oxide Films

Author(s): Paul W. Wang | Yanfeng Jiang | Jin-Cherng Hsu | Yu-Yun Chen | Yung-Hsing Lin | Huang-Lu Chen
Volume: 2011
Year: 2011
The Effects of Different Types of Fly Ash on the Compressive Strength Properties of Briquettes

Author(s): Özlem Çelik Sola | Murat Yayla | Barış Sayın | Cengiz Duran Atiş
Volume: 2011
Year: 2011
Formation and Device Application of Ge Nanowire Heterostructures via Rapid Thermal Annealing

Author(s): Jianshi Tang | Chiu-Yen Wang | Faxian Xiu | Yi Zhou | Lih-Juann Chen | Kang L. Wang
Volume: 2011
Year: 2011
Advances in Metallic Materials Processing

Author(s): Jyotsna Dutta Majumdar | Igor Smurov | Shoujin Sun | Indranil Manna
Volume: 2011
Year: 2011
SEM and EDS Characterisation of Layering TiOx Growth onto the Cutting Tool Surface in Hard Drilling Processes of Ti-Al-V Alloys

Author(s): M. Álvarez | J. Salguero | J. A. Sánchez | M. Huerta | M. Marcos
Volume: 2011
Year: 2011
Modifications Caused by Enzyme-Retting and Their Effect on Composite Performance

Author(s): Jonn A. Foulk | Denis Rho | Mercedes M. Alcock | Chad A. Ulven | Shanshan Huo
Volume: 2011
Year: 2011
Experimental Study of Fiber Length and Orientation in Injection Molded Natural Fiber/Starch Acetate Composites

Author(s): Heidi Peltola | Bo Madsen | Roberts Joffe | Kalle Nättinen
Volume: 2011
Year: 2011
Crystallisation Kinetics of a β-Spodumene-Based Glass Ceramic

Author(s): Oscar Rubem Klegues Montedo | Dachamir Hotza | Antonio Pedro Novaes de Oliveira | Robert Meszaros | Nahum Travitzky | Peter Greil
Volume: 2012
Year: 2012
Mechanical and Structural Properties of Fluorine-Ion-Implanted Boron Suboxide

Author(s): Ronald Machaka | Bonex W. Mwakikunga | Elayaperumal Manikandan | Trevor E. Derry | Iakovos Sigalas | Mathias Herrmann
Volume: 2012
Year: 2012
Effect of Silicon, Titanium, and Zirconium Ion Implantation on NiTi Biocompatibility

Author(s): L. L. Meisner | A. I. Lotkov | V. A. Matveeva | L. V. Artemieva | S. N. Meisner | A. L. Matveev
Volume: 2012
Year: 2012
Mathematical Model of Hot Metal Desulfurization by Powder Injection

Author(s): Yolanda Cepeda Rodríguez | Guillermo González Múzquiz | José Refugio Parga Torres | Luciano Eliezer Ramírez Vidaurri
Volume: 2012
Year: 2012
A Thermodamage Strength Theoretical Model of Ceramic Materials Taking into Account the Effect of Residual Stress

Author(s): Weiguo Li | Ruzhuan Wang | Dingyu Li | Daining Fang
Volume: 2012
Year: 2012
Isothermal and Two-Temperature Zone Selenization of Mo Layers

Author(s): L. Kaupmees | M. Altosaar | O. Volobujeva | T. Raadik | M. Grossberg | M. Danilson | E. Mellikov | P. Barvinschi
Volume: 2012
Year: 2012
Production of C3+ Olefins and Propylene from Ethanol by Zr-Modified H-ZSM-5 Zeolite Catalysts

Author(s): Megumu Inaba | Kazuhisa Murata | Isao Takahara | Ken-ichiro Inoue
Volume: 2012
Year: 2012
Focused Ion Beam in the Study of Biomaterials and Biological Matter

Author(s): Kathryn Grandfield | Håkan Engqvist
Volume: 2012
Year: 2012
Application of Resonant Nuclear Reactions for Studying the Diffusion of Nitrogen and Silicon in Ti-Modified Stainless Steel

Author(s): J. Arunkumar | C. David | K. G. M. Nair | B. K. Panigrahi | C. S. Sundar
Volume: 2012
Year: 2012
Powder Characterization and Electrochemical Properties of LiNi0.5Mn1.5O4 Cathode Materials Produced by Large Spray Pyrolysis Using Flame Combustion

Author(s): Shinsuke Akao | Motofumi Yamada | Takayuki Kodera | Kenichi Myoujin | Takashi Ogihara
Volume: 2011
Year: 2011
Low-Temperature Strengths and Ductility of Various Tungsten Sheets

Author(s): Yutaka Hiraoka | Hiroaki Kurishita
Volume: 2011
Year: 2011
Influence of Welding Parameters on Weld Formation and Microstructure of Dual-Laser Beams Welded T-Joint of Aluminum Alloy

Author(s): Min Li | Zhuguo Li | Yong Zhao | Hao Li | Yuhua Wang | Jian Huang
Volume: 2011
Year: 2011
The Electrical Characteristics of Aluminium Doped Zinc Oxide Thin Film for Humidity Sensor Applications

Author(s): N. D. Md Sin | M. Fuad Kamel | Rosalena Irma Alip | Zulfakri Mohamad | M. Rusop
Volume: 2011
Year: 2011
Effect of Induced Charge on the Passivity and Passivity Breakdown of 304LN Stainless Steels

Author(s): Gargi Roy Chowdhury | P. K. Mitra
Volume: 2011
Year: 2011
Characteristics and Photocatalytic Properties of TiO2 Thin Film Prepared by Sputter Deposition and Post-N+ Ion Implantation

Author(s): Haider A. Shukur | Mitsunobu Sato | Isao Nakamura | Ichiro Takano
Volume: 2012
Year: 2012
Purity of Ion Beams: Analysis and Simulation of Mass Spectra and Mass Interferences in Ion Implantation

Author(s): Volker Häublein | Heiner Ryssel | Lothar Frey
Volume: 2012
Year: 2012
Single-Ion Implantation for the Development of Si-Based MOSFET Devices with Quantum Functionalities

Author(s): Jeffrey C. McCallum | David N. Jamieson | Changyi Yang | Andrew D. Alves | Brett C. Johnson | Toby Hopf | Samuel C. Thompson | Jessica A. van Donkelaar
Volume: 2012
Year: 2012
Numerical Simulation for Thermal Shock Resistance of Ultra-High Temperature Ceramics Considering the Effects of Initial Stress Field

Author(s): Weiguo Li | Tianbao Cheng | Dingyu Li | Daining Fang
Volume: 2011
Year: 2011
Electrospun Nanoporous Poly(butylenes succinate-co-bytylene terephthalate) Nonwoven Mats

Author(s): Liang Wang | Yang-Shuai Liu | Lu-Feng Mo | Fu-Juan Liu | Lan Xu
Volume: 2011
Year: 2011
Analysis of Intergranular Precipitation in Isothermally Aged Nitrogen-Containing Austenitic Stainless Steels by an Electrochemical Method and Its Relation to Cryogenic Toughness

Author(s): Maribel L. Saucedo-Muñoz | Victor M. Lopez-Hirata | Hector J. Dorantes-Rosales | Erika O. Avila-Davila
Volume: 2011
Year: 2011
Effects of Ti-Based Additives on the Hydrogen Storage Properties of a LiBH4/CaH2 Destabilized System

Author(s): Hongwei Yang | Adeola Ibikunle | Andrew J. Goudy
Volume: 2010
Year: 2010
Magnetic Nanoparticles with Core Shell: Macroscopic Model and Coercive Field

Author(s): O. Hudak | M. Hudak
Volume: 2010
Year: 2010
Estimation of Elastic Moduli of Particulate Composites by New Models and Comparison with Moduli Measured by Tension, Dynamic, and Ultrasonic Tests

Author(s): G. Bourkas | I. Prassianakis | V. Kytopoulos | E. Sideridis | C. Younis
Volume: 2010
Year: 2010
The Modification of Sodium Polyacrylate Water Solution Cooling Properties by AL2O3

Author(s): Wojciech Gęstwa | Małgorzata Przyłęcka
Volume: 2010
Year: 2010
Fabrication of Si3N4 Nanocrystals and Nanowires Using PECVD

Author(s): Jingwei Song | Xiying Ma | Wang Zui | Chen Wei | Zhongpin Chen
Volume: 2010
Year: 2010
Friction and Wear Studies Using Taguchi Method: Application to the Characterization of Carbon-Silicon Carbide Tribological Couples of Automotive Water Pump Seals

Author(s): Pascal Déprez | Philippe Hivart | Jean François Coutouly | Etienne Debarre
Volume: 2009
Year: 2009
XPS Study of Chemical Changes on the La/Ce Treated Surface of A361 Aluminium Alloy Exposed to Air at Temperatures up to 500∘C

Author(s): A. Pardo | S. Feliú | M. C. Merino | R. Arrabal | E. Matykina
Volume: 2009
Year: 2009
Fabrication of Highly Porous Alumina-Based Ceramics with Connected Spaces by Employing PMMA Microspheres as a Template

Author(s): Kazutaka Kamitani | Takeo Hyodo | Yasuhiro Shimizu | Makoto Egashira
Volume: 2009
Year: 2009
Column Strengthening with TRC: Influences of the Column Geometry onto the Confinement Effect

Author(s): Regine Ortlepp | Andy Lorenz | Manfred Curbach
Volume: 2009
Year: 2009
The Effect of Novel Binary Accelerator System on Properties of Vulcanized Natural Rubber

Author(s): Moez Kamoun | Abdallah Nassour | Nelles Michael
Volume: 2009
Year: 2009
Preparation and In Vitro Behavior of a Poly(lactic acid)-Fiber/Hydroxyapatite Composite Sheet

Author(s): Yasuhiro Tanimoto | Norihiro Nishiyama
Volume: 2009
Year: 2009
Properties Evolution during Transient Liquid Phase Sintering of PM Alumix 431

Author(s): Maziyar Azadbeh | Zahra Allafe Razzaghi
Volume: 2009
Year: 2009
Anion Effect of Zinc Source on Chemically Deposited ZnS(O,OH) Films

Author(s): K. Ernits | K. Muska | M. Danilson | J. Raudoja | T. Varema | O. Volobujeva | M. Altosaar
Volume: 2009
Year: 2009
Systematic Investigation of Gettering Effects on 4th Row Element Impurities in Si by Dopant Atoms

Author(s): Koji Sueoka | Ken Kamimura | Seiji Shiba
Volume: 2009
Year: 2009
Plasma Spraying and Characterization of Tungsten Carbide-Cobalt Coatings by the Water-Stabilized System WSP

Author(s): Pavel Ctibor | Micheala Kašparová | Jeremy Bellin | Emmanuel Le Guen | František Zahálka
Volume: 2009
Year: 2009
The Possibility of Correlation of Hardening Power for Oils and Polymers of Quenching Mediums

Author(s): Małgorzata Przyłęcka | Wojciech Gęstwa
Volume: 2009
Year: 2009
Temperature Dependent Electrical Properties and Catalytic Activities of La2O3–CO2–H2O Phase System

Author(s): Bahcine Bakiz | Frédéric Guinneton | Madjid Arab | Sylvie Villain | Abdeljalil Benlhachemi | Jean Raymond Gavarri
Volume: 2009
Year: 2009
Synthetic Conditions and Color Characteristics of Tantalum Oxynitride Prepared via Liquid-NH3 Process

Author(s): Yo Sasaki | Zentaro Tokuyasu | Yoichi Ono | Mitsunobu Iwasaki | Seishiro Ito
Volume: 2009
Year: 2009
Selectivity of Na-Montmorillonite versus Concentration of Two Competitive Bivalent Cations (Cu2+, Pb2+): Quantitative XRD Investigation

Author(s): W. Oueslati | M. Meftah | H. Ben Rhaiem | A. Ben Haj Amara
Volume: 2009
Year: 2009
Self-Assembly of Cluster-Based Nanoscopic Supramolecules into One-Dimensional Coordination Polymers

Author(s): Jian-Jun Zhang | Sergio Aarón Gamboa | Barry Julian Davis | Abdessadek Lachgar
Volume: 2009
Year: 2009
Laser Beam Welding of AA5052, AA5083, and AA6061 Aluminum Alloys

Author(s): A. El-Batahgy | M. Kutsuna
Volume: 2009
Year: 2009
Prediction of Continuous Cooling Diagrams for the Precision Forged Tempering Steel 50CrMo4 by Means of Artificial Neural Networks

Author(s): Florian Nürnberger | Mirko Schaper | Friedrich-Wilhelm Bach | Iryna Mozgova | Kostjantyn Kuznetsov | Anna Halikova | Olga Perederieieva
Volume: 2009
Year: 2009
Morphological Investigation of Foamed Aluminum Parts Produced by Melt Gas Injection

Author(s): R. Surace | L. A. C. De Filippis | E. Niini | A. D. Ludovico | J. Orkas
Volume: 2009
Year: 2009
Fire and Gas Barrier Properties of Poly(styrene-co-acrylonitrile) Nanocomposites Using Polycaprolactone/Clay Nanohybrid Based-Masterbatch

Author(s): S. Benali | A. Olivier | P. Brocorens | L. Bonnaud | M. Alexandre | S. Bourbigot | E. Espuche | F. Gouanve | R. Lazzaroni | Ph. Dubois
Volume: 2008
Year: 2008
Synthesis and Characterization of High-Entropy Alloy AlXFeCoNiCuCr by Laser Cladding

Author(s): Xiaoyang Ye | Mingxing Ma | Wenjin Liu | Lin Li | Minlin Zhong | Yuanxun Liu | Qiwen Wu
Volume: 2011
Year: 2011
Critical Analysis on the Structural and Magnetic Properties of Bulk and Nanocrystalline Cu-Fe-O

Author(s): D. Paul Joseph | C. Venkateswaran | R. Selva Vennila
Volume: 2010
Year: 2010
Metallurgical Aspects of Laser Surface Processing of PM Cr-V Ledeburitic Steel

Author(s): Peter Jurči | Jiři Cejp | Jan Brajer
Volume: 2011
Year: 2011
The Influence of Prior Natural Aging on the Subsequent Artificial Aging Response of Aluminium Alloy A356 with Respective Globular and Dendritic Microstructures

Author(s): Heinrich Möller | Gonasagren Govender | Pierre Rossouw | Waldo Stumpf
Volume: 2011
Year: 2011
Why do you need a reservation system?      Affiliate Program