Academic Journals Database
Disseminating quality controlled scientific knowledge

Journal of Achievements in Materials and Manufacturing Engineering

ISSN: 1734--8412
Publisher: World Academy of Materials and Manufacturing Engineering


ADD TO MY LIST
 
Skeleton castings dynamic load resistance PDF available

Author(s): M. Cholewa | J. Szajnar | T. Szuter
Volume: 58
Issue: 2
Year: 2013
Development of the intelligent algorithm to control on-line bead height for robotic welding process PDF available

Author(s): J.S. Son | I.S. Kim | J.H. Lee | M.H. Park | G.S. Jeon
Volume: 58
Issue: 2
Year: 2013
Input physical properties in mathematical model of steel quenching PDF available

Author(s): B. Smoljan | D. Iljkić | L. Pomenić
Volume: 58
Issue: 2
Year: 2013
Effect of MWCNTs content on the characteristics of A356 nanocomposite PDF available

Author(s): R.M. Rashad | O.M. Awadallah | A.S. Wifi
Volume: 58
Issue: 2
Year: 2013
Cooling curve and microchemical phase analysis of rapidly quenched magnesium AM60B and AE44 alloys PDF available

Author(s): A.J. Gesing | J.H. Sokolowsk | P.C. Marchwica | C. Blawert | J. Jekl | M. Kozdras | M. Kasprzak | J. Wood
Volume: 58
Issue: 2
Year: 2013
The evaluation of the TPM synchronization on the basis of their outputs PDF available

Author(s): M. Dolecki | R. Kozera | K. Lenik
Volume: 57
Issue: 2
Year: 2013
Influence the heat treatment of two base metal alloys used on dental prosthesis on corrosion resistance PDF available

Author(s): Ł. Reimann | L.A. Dobrzański | B. Nieradka | M. Kusy | R. Riedlmajer
Volume: 57
Issue: 2
Year: 2013
Application of Taguchi design method to optimize the electrical discharge machining PDF available

Author(s): D.C. Chen | J.J. Jhang | M.W. Guo
Volume: 57
Issue: 2
Year: 2013
Austenitic steels for boiler elements in USC power plants PDF available

Author(s): A. Zieliński
Volume: 57
Issue: 2
Year: 2013
Applications of lasers in metallization of thermoplastic and thermosetting polymers PDF available

Author(s): P. Rytlewski | M. Żenkiewicz
Volume: 57
Issue: 2
Year: 2013
Types of wear and tear of biomaterials used in orthopaedic surgery PDF available

Author(s): L. Klimek | E. Wołowiec | B. Majkowska
Volume: 56
Issue: 2
Year: 2013
The silica-titania layer deposited by sol-gel method on the AISI 316L for contact with blood PDF available

Author(s): W. Walke | Z. Paszenda | P. Karasiński | M. Basiaga
Volume: 56
Issue: 2
Year: 2013
Fabrication of ternary Ca-Mg-Zn bulk metallic glasses PDF available

Author(s): R. Nowosielski | A. Borowski | A. Guwer | R. Babilas
Volume: 56
Issue: 2
Year: 2013
Toward a new approach for passive safety assessment of gymnastic equipment PDF available

Author(s): G. Costabile | S. Schwanitz | G. Amodeo | M. Martorelli | A. Lanzotti | S. Odenwald
Volume: 56
Issue: 2
Year: 2013
Evaluation of selected elements of human resources management in organization PDF available

Author(s): A. Kania | M. Spilka
Volume: 56
Issue: 2
Year: 2013
Modification of non-metallic inclusions in high-strength steels containing increased Mn and Al contents PDF available

Author(s): A. Grajcar | M. Kamińska | U. Galisz | L. Bulkowski | M. Opiela | P. Skrzypczyk
Volume: 55
Issue: 2
Year: 2012
Characterization of aluminosilicate nanoparticles as a reinforcement in composite materials based on polymeric matrix PDF available

Author(s): L.A. Dobrzański | M. Górniak | Ł. Reimann | M. Staszuk
Volume: 55
Issue: 2
Year: 2012
Mechanical properties and microstructure of high-manganese TWIP, TRIP and TRIPLEX type steels PDF available

Author(s): L.A. DobrzańskI | W. Borek
Volume: 55
Issue: 2
Year: 2012
Analysis of crystallization process of selected Fe-based bulk metallic glasses PDF available

Author(s): R. Babilas | R. Nowosielski | W. Pilarczyk | P. Sakiewicz
Volume: 55
Issue: 2
Year: 2012
Influence of cold working on microstructure and properties of annealing CuTi4 alloy PDF available

Author(s): J. Konieczny | Z. Rdzawski
Volume: 55
Issue: 2
Year: 2012
Properties of the magnetostrictive composite materials with the polyurethane matrix reinforced with Terfenol-D particles PDF available

Author(s): L.A. Dobrzański | A.E. Tomiczek | A.W. Pacyna
Volume: 55
Issue: 2
Year: 2012
Investigation of various properties of monocrystalline silicon solar cell PDF available

Author(s): L.A. Dobrzański | M. Musztyfaga | M. Giedroć | P. Panek
Volume: 55
Issue: 2
Year: 2012
Disadvantages of applied lacquer coatings on polymer substrate PDF available

Author(s): Ł. Wierzbicki | J. Kulesza
Volume: 55
Issue: 2
Year: 2012
The kinetics of phase transformations of undercooled austenite of the 38MnCrNi6-4-4 hypoeutectoid steel PDF available

Author(s): E. Rożniata | R. Dziurka | R. Dąbrowski
Volume: 55
Issue: 2
Year: 2012
Structure and magnetic properties of Fe56Co7 Ni7 B20Nb10 metallic glasses PDF available

Author(s): S. Lesz | M. Nabiałek | R. Nowosielski
Volume: 55
Issue: 2
Year: 2012
Solubility of nitrogen in liquid Fe-10Ti and Fe-25Ti alloys PDF available

Author(s): A. Hutny | J. Siwka
Volume: 55
Issue: 2
Year: 2012
Segregation of alloying elements in thermomechanically rolled medium-Mn multiphase steels PDF available

Author(s): A. Grajcar | M. Kamińska | M. Opiela | P. Skrzypczyk | B. Grzegorczyk | E. Kalinowska-Ozgowicz
Volume: 55
Issue: 2
Year: 2012
Fatigue testing by means of miniature test specimens PDF available

Author(s): J. Volak | M. Novak | J. Kaiser | V. Mentl
Volume: 55
Issue: 2
Year: 2012
Failure of austenitic stainless steel tubes during steam generator operation PDF available

Author(s): S. Topolska | J. Łabanowski | M. Głowacka
Volume: 55
Issue: 2
Year: 2012
Shape memory actuators - potentials and specifics of their technical use and electrical activation PDF available

Author(s): J. Strittmatter a,b | P. Gümpel | V. Gheorghita
Volume: 55
Issue: 2
Year: 2012
Investigation of the structure and properties of Fe-Co-B-Si-Nb bulk amorphous alloy obtained by pressure die casting method PDF available

Author(s): W. Pilarczyk | R. Nowosielsk | R. Babilas | P. Sakiewicz | A. Pilarczyk
Volume: 55
Issue: 2
Year: 2012
Evaluation of piezoelectric smart materials subjected to impact test over range of temperatures PDF available

Author(s): I. Patel a,b | E. Siores
Volume: 55
Issue: 2
Year: 2012
Thermal properties of Fe-based bulk metallic glasses PDF available

Author(s): R. Nowosielski | A. Januszka | R. Babilas
Volume: 55
Issue: 2
Year: 2012
The impact of the chemical composition of continuous casting moulds on their physical properties PDF available

Author(s): T. Lis | H. Kania | K. Nowack
Volume: 55
Issue: 2
Year: 2012
The influence of friction stir welding process on structure and mechanical properties of the AlSiCu/SiC composites PDF available

Author(s): P. Kurtyka | I. Sulima | A. Wójcicka | N. Ryłko | A. Pietras
Volume: 55
Issue: 2
Year: 2012
Digitization procedure of creating 3D model of dental bridgework reconstruction PDF available

Author(s): L.A. Dobrzański | Ł. Reimann
Volume: 55
Issue: 2
Year: 2012
Heat treatment influence on mechanical properties of structural steels for quenching and tempering PDF available

Author(s): L.A. Dobrzański | R. Honysz
Volume: 55
Issue: 2
Year: 2012
Diagnostics of surface of narrow crystallizer’s desks PDF available

Author(s): J. David | P. Švec | R. Frischer
Volume: 55
Issue: 2
Year: 2012
Adjustment method of parameters intended for first-principle models PDF available

Author(s): P. Czop | G. Kost | D. Sławik | G. Wszołek | D. Jakubowski
Volume: 55
Issue: 2
Year: 2012
Off-line displacement error correction method for servo-hydraulic testers PDF available

Author(s): D. Braska | M. Huchla | P. Czop | G. Wszołek
Volume: 55
Issue: 2
Year: 2012
Investigations of morphology and optical properties of thin films of TiOPc/PTCDA donor acceptor couple PDF available

Author(s): J. Weszka a,b | P. Jarka | B. Hajduk | M. Chwastek-Ogierman
Volume: 55
Issue: 2
Year: 2012
Role of slag in the steel refining process in the ladle PDF available

Author(s): Z. Wcisło | A. Michaliszyn | A. Baka
Volume: 55
Issue: 2
Year: 2012
Evaluation of an AlCrN coated FSW tool PDF available

Author(s): G.F. Batalha a,c | A. Farias | R. Magnabosco | S. Delijaicov | M. Adamiak | L.A. Dobrzański
Volume: 55
Issue: 2
Year: 2012
Study on carbide cutting tool life using various cutting speeds for α-β Ti-alloy machining PDF available

Author(s): K.B. Ahsan | A.M. Mazid | R.E. Clegg | G.K.H. Pang
Volume: 55
Issue: 2
Year: 2012
Simulation studies of fatigue degradation process with reference to composite pipes PDF available

Author(s): G. Wróbel | M. Rojek | M. Szymiczek
Volume: 55
Issue: 2
Year: 2012
CFD modelling of non-metallic inclusions removal process in the T-type tundish PDF available

Author(s): M. Warzecha | T. Merder | P. Warzecha
Volume: 55
Issue: 2
Year: 2012
Modelling the effects of preheating on angular distortions in one sided fillet welds PDF available

Author(s): M. Sadat Ali | S. Rao | N. Rao
Volume: 55
Issue: 2
Year: 2012
Modelling steel’s homogenization during argon purging PDF available

Author(s): J. Pieprzyca | Z. Kudliński | K. Michalek | K. Gryc | M. Tkadlečková
Volume: 55
Issue: 2
Year: 2012
Numerical simulation of liquid flow and mixing steel in multi-strands tundish PDF available

Author(s): T. Merder
Volume: 55
Issue: 2
Year: 2012
Simulation of powder injection moulding conditions using cadmould program PDF available

Author(s): G. Matula | L.A. Dobrzański | M. Ambroziak
Volume: 55
Issue: 2
Year: 2012
Application of the Finite Element Method for computer simulation of aluminum stamping process PDF available

Author(s): W. Kwaśny | R. Dziwis
Volume: 55
Issue: 2
Year: 2012
Modelling and simulation of plasma spraying process with a use of Jets&Poudres program PDF available

Author(s): S. Kotowski | J. Sieniawski | M. Góral
Volume: 55
Issue: 2
Year: 2012
Possibilities of applying rheological measurements in metallurgy PDF available

Author(s): M. Korolczuk-Hejnak
Volume: 55
Issue: 2
Year: 2012
Advanced numerical simulations of selected metallurgical units PDF available

Author(s): G. Kokot | T. Burczyński a,b | A. John
Volume: 55
Issue: 2
Year: 2012
Influence of the steel scrap classes on the liquid steel output molten in electric steel processes PDF available

Author(s): K. Janiszewski | J. Pieprzyca | Z. Kudliński
Volume: 55
Issue: 2
Year: 2012
Alternate slicing and deposition strategies for fused deposition modelling of light curved parts PDF available

Author(s): B. Huang | S. Singamneni
Volume: 55
Issue: 2
Year: 2012
Factors determining the level of innovation smelting company PDF available

Author(s): M. Górska
Volume: 55
Issue: 2
Year: 2012
The exemplar design features in creation of the series of types PDF available

Author(s): P. Gendarz | D. Rabsztyn
Volume: 55
Issue: 2
Year: 2012
Optimization algorithms in the charge planning for the BOF Plant PDF available

Author(s): M. Gawron | Cz. Adamczyk
Volume: 55
Issue: 2
Year: 2012
Determination of rheological properties using hybrid optimisation method PDF available

Author(s): B. Foder | K. Sołek
Volume: 55
Issue: 2
Year: 2012
Dust arising during steelmaking processes PDF available

Author(s): P. Popielska-Ostrowska | J. Siwka | A. Sorek | M. Niesler
Volume: 55
Issue: 2
Year: 2012
Effects of Nb, Ti and V on recrystallization kinetics of austenite in microalloyed steels PDF available

Author(s): M. Opiela | W. Ozgowicz
Volume: 55
Issue: 2
Year: 2012
Laser ablation surface layer texturing of selected Fe-C alloys PDF available

Author(s): W. Napadłek
Volume: 55
Issue: 2
Year: 2012
Production of ultra-pure steel intended for forged elements PDF available

Author(s): A. Michaliszyn | Z. Wcisło | M. Rydarowicz
Volume: 55
Issue: 2
Year: 2012
TEM microstructure investigations of aluminium alloys used for laser alloying PDF available

Author(s): K. Labisz | M. Krupiński | T. Tański
Volume: 55
Issue: 2
Year: 2012
Controlling technology of Sn whisker in welding of electronics lead PDF available

Author(s): T. Kubouchi | O. Kamiya | T. Sakakida | M. Chida | S. Nishikawa
Volume: 55
Issue: 2
Year: 2012
Machining of near-net shape forged pinions PDF available

Author(s): D. Kramar | J. Kopac
Volume: 55
Issue: 2
Year: 2012
Silicon behaviour at the blast furnace process PDF available

Author(s): A. Klimczyk | R. Stachura | M. Bernasowski | A. Łędzki
Volume: 55
Issue: 2
Year: 2012
Application of HP-HT methodin the manufacture of NiAl phase PDF available

Author(s): P. Hyjek | I. Sulima | P. Malczewski | L. Jaworska
Volume: 55
Issue: 2
Year: 2012
Study of Fe-C-based alloys by dynamic methods of thermal analysis PDF available

Author(s): K. Gryc | B. Smetana | M. Žaludová | M. Tkadlečková | K. Michalek | L. Socha | P. Klus | J. Dobrovská | P. Machovčák
Volume: 55
Issue: 2
Year: 2012
The technology of Plasma Spray Physical Vapour Deposition PDF available

Author(s): M. Góral | J. Sieniawski
Volume: 55
Issue: 2
Year: 2012
Diffusion AlSi-MeCrAlY coatings obtained on intermetallic γ-TiAl phase PDF available

Author(s): M. Góral | G. Moskal
Volume: 55
Issue: 2
Year: 2012
The application of polymer inclusive membranes for removal of heavy metal ions from waste solutions PDF available

Author(s): B. Gajda | M.B. Bogacki
Volume: 55
Issue: 2
Year: 2012
The influence of the selected parameters of the mathematical model of steel continuous casting on the distribution of the solidifying strand temperature PDF available

Author(s): J. Falkus | K. Miłkowska-Piszczek | M. Rywotycki | E. Wielgosz
Volume: 55
Issue: 2
Year: 2012
Recycling process of casting molds applying to precision castings PDF available

Author(s): M. Drajewicz | M. Pytel
Volume: 55
Issue: 2
Year: 2012
Mechanically milled aluminium matrix composites reinforced with halloysite nanotubes PDF available

Author(s): L.A. Dobrzański | B. Tomiczek | M. Adamiak | K. Gołombek
Volume: 55
Issue: 2
Year: 2012
Influence of phyllosilicates 2:1 on structure of polymer nanocomposites PDF available

Author(s): L.A. Dobrzański | M. Bilewicz
Volume: 55
Issue: 2
Year: 2012
Possibilities of S-EMS utilization for the improvement of central segregation in continuously cast billets in conditions of TŽ PDF available

Author(s): J. Cibulka | D. Bocek | T. Huczala | J. Cupek
Volume: 55
Issue: 2
Year: 2012
Friction Stir Lap Welding: material flow, joint structure and strength PDF available

Author(s): Z.W. Chen | S. Yazdanian
Volume: 55
Issue: 2
Year: 2012
Characterization and performance of laser alloyed commercıal tool steels PDF available

Author(s): M. Bonek
Volume: 55
Issue: 2
Year: 2012
The PS-PVD method - formation of columnar TBCs on CMSX-4 superalloy PDF available

Author(s): M. Góral | S. Kotowski | M. Drajewicz | J. Sieniawski
Volume: 55
Issue: 2
Year: 2012
Thermophysical properties of selected powders for thermal barrier coatings PDF available

Author(s): M. Drajewicz | M. Góral | M. Pytel | J. Sieniawski
Volume: 55
Issue: 2
Year: 2012
Quality management in enterprise using Six Sigma method PDF available

Author(s): M. Spilka | M. Sakaluk | A. Kania
Volume: 55
Issue: 2
Year: 2012
Conformity assessment as a manner of risk optimisation in organisations PDF available

Author(s): T. Karkoszka
Volume: 55
Issue: 2
Year: 2012
Current situation on the production market of FeMn and FeCr PDF available

Author(s): M. Karbowniczek | J. Gładysz | W. Ślęzak
Volume: 55
Issue: 2
Year: 2012
Industrial catalysts as a source of valuable metals PDF available

Author(s): A. Fornalczyk
Volume: 55
Issue: 2
Year: 2012
Comparative analysis of two processes for desulphurization of battery paste PDF available

Author(s): D. Malak | A. Rodak | A. Studnicka | W. Soszyński
Volume: 55
Issue: 2
Year: 2012
Oxidation behaviour of palladium modified aluminide coatings deposited by CVD method on nickel-based superalloys under air atmosphere PDF available

Author(s): M. Zagula-Yavorska | K. Kubiak | J. Sieniawski
Volume: 55
Issue: 2
Year: 2012
Evaluating the machinability of AISI 304 stainless steel using alumina inserts PDF available

Author(s): M.A. Xavior
Volume: 55
Issue: 2
Year: 2012
Manufacturing and characterisation of PMMA-graphene oxide (GO) nanocomposite sandwich films with electrospun nano-fibre core PDF available

Author(s): J. Upadhyay | R. Das | S. Rao | D. Liu | D. Bhattacharyya
Volume: 55
Issue: 2
Year: 2012
Performance of cryogenically treated CBN inserts on difficult to cut materials during turning PDF available

Author(s): S. Thamizhmanii | S. Hasan
Volume: 55
Issue: 2
Year: 2012
Pb(II) leaching from waste CRT funnel glass in nitric acid solutions PDF available

Author(s): A. Strzałkowska | M. Wojtala | J. Siwka
Volume: 55
Issue: 2
Year: 2012
The influence of different steering systems on a wheel slip PDF available

Author(s): D. Stajnko | P. Berk | B. Mursec | P. Vindis
Volume: 55
Issue: 2
Year: 2012
A review of contemporary solutions for cold rolling that allow quality improvement PDF available

Author(s): W. Soszyński | A. Studnicka
Volume: 55
Issue: 2
Year: 2012
Effects of pre-process and post-process parameters on formability of magnesium alloys PDF available

Author(s): M.W. Soomro | T.R. Neitzert
Volume: 55
Issue: 2
Year: 2012
Mechanical milling of aluminum powder using planetary ball milling process PDF available

Author(s): M. Ramezani | T. Neitzert
Volume: 55
Issue: 2
Year: 2012
Study of electroless nickel plating on PerFactoryTM rapid prototype model PDF available

Author(s): J.C. Rajaguru | C. Au, M. Duke
Volume: 55
Issue: 2
Year: 2012
Coupled mechanical-electrical identification of the contact resistance in the stranded electric power cable PDF available

Author(s): Y. Zeroukhi | E. Napieralska-Juszczak a,c | K. Komeza | F. Morganti | G. Vega
Volume: 55
Issue: 2
Year: 2012
An estimation of the geothermal source power PDF available

Author(s): R. Szostek
Volume: 55
Issue: 2
Year: 2012
Application of feature based method in constructing innovative sheathing of railway wagons PDF available

Author(s): A. Baier | M. Majzner
Volume: 52
Issue: 2
Year: 2012
The study of glass forming ability of Fe-based alloy for welding processes PDF available

Author(s): W. Pilarczyk
Volume: 52
Issue: 2
Year: 2012
Surface layers on the Mg-Al-Zn alloys coated using the CVD and PVD methods PDF available

Author(s): T. Tański
Volume: 53
Issue: 2
Year: 2012
Structure and density of Fe36Co36B19.2Si4.8Nb4 bulk glassy alloy PDF available

Author(s): A. Januszka | R. Nowosielski
Volume: 52
Issue: 2
Year: 2012
Researches of topography and optical properties of the thin films NiPc/PTCDA donor acceptor couple PDF available

Author(s): J. Weszka | P. Jarka | M. Chwastek-Ogierman | B. Hajduk
Volume: 53
Issue: 2
Year: 2012
Continuous casting and rolling for the manufacturing of thin Al sheets PDF available

Author(s): M. Rosso | I. Peter
Volume: 52
Issue: 2
Year: 2012
Characterisation of carbon nanotubes decorated with platinum nanoparticles PDF available

Author(s): M. Pawlyta | D. Łukowiec | A.D. Dobrzańska-Danikiewicz
Volume: 53
Issue: 2
Year: 2012
Thermo-mechanical processing and microstructure evolution of highmanganese austenitic TRIP-type steels PDF available

Author(s): L.A. Dobrzański | W. Borek | M. Ondrula
Volume: 53
Issue: 2
Year: 2012
Mechanical and physical properties investigation of polyurethane material obtained from renewable natural source PDF available

Author(s): D.J. dos Santos | L.B. Tavares | G.F. Batalha
Volume: 54
Issue: 2
Year: 2012
Development of unconventional forming methods PDF available

Author(s): S. Rusz | L. Čížek
Volume: 54
Issue: 2
Year: 2012
A review of recovery of metals from industrial waste PDF available

Author(s): U.U. Jadhav | H. Hocheng
Volume: 54
Issue: 2
Year: 2012
Sustainability issues of research and development of forging PDF available

Author(s): Y.T. Im | S.K. Hwang | D.K. Kim | H.M. Baek | W.Y. Park | J.W. Lee | H.S. Joo | J.M. Kim
Volume: 54
Issue: 2
Year: 2012
Chosen manufacture methods of Polymeric Graded Materials with electrical and magnetic properties gradation PDF available

Author(s): J. Stabik | M. Chomiak | A. Dybowska | Ł. Suchoń | K. Mrowiec
Volume: 54
Issue: 2
Year: 2012
The skeleton castings as a new type of cast lattice structures

Author(s): M. Cholewa | T. Szuter | T. Wróbel | M. Kondracki
Volume: 54
Issue: 2
Year: 2012
Computer modelling and analysis of microstructures with fibres and cracks PDF available

Author(s): P. Fedeliński
Volume: 54
Issue: 2
Year: 2012
Application of contemporary engineering techniques and technologies in the field of dental prosthetics PDF available

Author(s): I. Budak | B. Kosec | M. Sokovic
Volume: 54
Issue: 2
Year: 2012
New trends in nanoscale compounds for energy storage PDF available

Author(s): Z.A. Stotsko | B.Ya. Venhryn
Volume: 54
Issue: 2
Year: 2012
The influence of inoculants sort on pure Al structure PDF available

Author(s): T. Wróbel | J. Szajnar
Volume: 50
Issue: 2
Year: 2012
Occupational risk assessment at the work station in the selected enterprise PDF available

Author(s): A. Kania | M. Spilka | G. Cieśliński
Volume: 51
Issue: 2
Year: 2012
Influence of plastic deformation on CCT-diagrams of new-developed microalloyed steel PDF available

Author(s): M. Opiela | W. Zalecki | A. Grajcar
Volume: 51
Issue: 2
Year: 2012
Thermal stability of protective coatings produced on nickel based superalloy PDF available

Author(s): M. Pytel | M. Góral | M. Motyka | T. Miziniak
Volume: 51
Issue: 2
Year: 2012
Analyses of the melt cooling rate in the melt-spinning process PDF available

Author(s): B. Karpe | B. Kosec | M. Bizjak
Volume: 51
Issue: 2
Year: 2012
Deformation process of the material of mine powered roof supports in low-cycle fatigue conditions PDF available

Author(s): J. Okrajni | M. Plaza | M. Jaszczuk
Volume: 50
Issue: 2
Year: 2012
Mössbauer investigations of amorphous Fe(80-x) B20Nbx (x=0,4,6,10) alloys PDF available

Author(s): R. Babilas | R. Nowosielski | M. Kądziołka-Gaweł | A. Zajączkowski
Volume: 50
Issue: 2
Year: 2012
Mechanical properties of hot deformed Inconel 718 and X750 PDF available

Author(s): A. Nowotnik | P. Pędrak | J. Sieniawski | M. Góral
Volume: 50
Issue: 2
Year: 2012
Elastomeric matrix composites: effect of processing conditions on the physical, mechanical and viscoelastic properties PDF available

Author(s): D. Zaimova | E. Bayraktar | D. Katundi | N. Dishovsky
Volume: 50
Issue: 2
Year: 2012
Modelling of coal in a railway coach PDF available

Author(s): A Baier | M. Majzner
Volume: 45
Issue: 2
Year: 2011
Demonstration of First-Principle Data- Driven models using numerical case studies PDF available

Author(s): P. Czop | D. Sławik | G. Wszołek
Volume: 45
Issue: 2
Year: 2011
Multi-equipment condition based maintenance optimization by multi- objective genetic algorithm PDF available

Author(s): Š. Valčuha | A. Goti | J. Úradníček | I. Navarro
Volume: 45
Issue: 2
Year: 2011
The robot programming language interpreter written in the Logo language PDF available

Author(s): K. Foit
Volume: 45
Issue: 2
Year: 2011
Synthesis water level control by fuzzy logic PDF available

Author(s): P. Berk | D. Stajnko | P. Vindis | B. Mursec | M. Lakota
Volume: 45
Issue: 2
Year: 2011
Some remarks on the methodology and e-learning tools used in the TQM course PDF available

Author(s): T.A. Walasek | Z. Kucharczyk | D. Morawska-Walasek
Volume: 44
Issue: 2
Year: 2011
Cubic boron nitride based composites for cutting applications PDF available

Author(s): P. Klimczyk | P. Figiel | I. Petrusha | A. Olszyna
Volume: 44
Issue: 2
Year: 2011
Disassembly and aggregation in computer aided overhaul preparation PDF available

Author(s): W. Janik | P. Gendarz
Volume: 44
Issue: 2
Year: 2011
Formulation and identification of First- Principle Data-Driven models PDF available

Author(s): P. Czop | G. Kost | D. Sławik | G. Wszołek
Volume: 44
Issue: 2
Year: 2011
State of cure evaluation by different experimental methods in thick rubber parts PDF available

Author(s): D. Zaimova | E. Bayraktar | N. Dishovsky
Volume: 44
Issue: 2
Year: 2011
Hydrogen storage alloys prepared by high-energy milling PDF available

Author(s): M. Staszewski | A. Sierczyńska | M. Kamińska | M. Osadnik | M. Czepelak | P. Swoboda
Volume: 44
Issue: 2
Year: 2011
Structure and mechanical properties of austenitic steel after cold rolling PDF available

Author(s): A. Kurc-Lisiecka | E. Kalinowska-Ozgowicz
Volume: 44
Issue: 2
Year: 2011
Structure, thermal and magnetic properties of (Fe72B20Si4Nb4)100-xYx (x=0.3) metallic glasses PDF available

Author(s): R. Babilas | S. Griner | P. Sakiewicz | R. Nowosielski
Volume: 44
Issue: 2
Year: 2011
Structure and properties of gradient PVD coatings deposited on the sintered tool materials PDF available

Author(s): L.A. Dobrzański | L.W. Żukowska
Volume: 44
Issue: 2
Year: 2011
Designing of cooling conditions for Si-Al microalloyed TRIP steel on the basis of DCCT diagrams PDF available

Author(s): A. Grajcar | W. Zalecki | R. Kuziak
Volume: 45
Issue: 2
Year: 2011
The preparation of aramid fibres in silicone based composite materials PDF available

Author(s): L.A. Dobrzański | A.J. Nowak | A. Pusz | M. Górniak
Volume: 45
Issue: 2
Year: 2011
Corrosion resistance of AZ31 alloy after plastic working in NaCl solutions PDF available

Author(s): W. Walke | J. Przondziono | E. Hadasik | J. Szala | D. Kuc
Volume: 45
Issue: 2
Year: 2011
Structure and electrical properties of screen printed contacts on silicon solar cells PDF available

Author(s): L.A. Dobrzański | M. Musztyfaga | A. Drygała | W. Kwaśny | P. Panek
Volume: 45
Issue: 2
Year: 2011
The structure and mechanical properties of Al-Mg-Mn alloys shaped in the process of thermomechanical treatment PDF available

Author(s): W. Ozgowicz | E. Kalinowska-Ozgowicz | A. Kowalski | K. Gołombek
Volume: 45
Issue: 2
Year: 2011
The corrosion resistance of zinc-nickel composite coatings PDF available

Author(s): J. Panek | Bierska-Piech | M. Karolus
Volume: 45
Issue: 2
Year: 2011
Evaluation of selected steel thermochemical treatment technologies using foresight methods PDF available

Author(s): A.D. Dobrzańska-Danikiewicz | E. Hajduczek | M. Polok-Rubiniec | M. Przybył | K. Adamaszek
Volume: 46
Issue: 2
Year: 2011
The influence of Ni-P layer deposited onto Al2O3 on structure and properties of Al-Al2O3 composite materials PDF available

Author(s): L.A. Dobrzański | M. Kremzer | J. Konieczny
Volume: 46
Issue: 2
Year: 2011
Crystallisation kinetics of the Zn-Al alloys modified with lanthanum and cerium PDF available

Author(s): B. Krupińska | Z. Rdzawski | K. Labisz
Volume: 46
Issue: 2
Year: 2011
Thermomechanical treatment of low-alloy copper alloys of the kind CuCo2Be and CuCo1NiBe PDF available

Author(s): W. Ozgowicz | E. Kalinowska-Ozgowicz | B. Grzegorczyk
Volume: 46
Issue: 2
Year: 2011
Machinability of hard stainless steel and alloy steel using PCBN tools PDF available

Author(s): S. Thamizhmanii | H.Sulaiman
Volume: 46
Issue: 2
Year: 2011
Computer simulation of quenched and tempered steel properties PDF available

Author(s): B. Smoljan | D. Iljkić | H. Novak
Volume: 46
Issue: 2
Year: 2011
Frictional couplings of wheel with a rail in a brake control system of rail vehicles PDF available

Author(s): A. Baier | A. Niedworok
Volume: 46
Issue: 2
Year: 2011
Thermal and structure analysis of the MA MgAl6Zn3 magnesium alloy PDF available

Author(s): L.A. Dobrzański | M. Król
Volume: 46
Issue: 2
Year: 2011
Thermal and acid treatment of diatom frustules PDF available

Author(s): E. Gulturk | M. Guden
Volume: 46
Issue: 2
Year: 2011
Selected properties of the halloysite as a component of Geosynthetic Clay Liners (GCL) PDF available

Author(s): P. Sakiewicz | R. Nowosielski | W. PIlarczyk | K. Gołombek | M. Lutyński
Volume: 48
Issue: 2
Year: 2011
Ecological optimisation of materials technological processes PDF available

Author(s): R. Nowosielski | A. Kania
Volume: 48
Issue: 2
Year: 2011
Sustainable technological process as an element of the sustainable development strategy realisation PDF available

Author(s): R. Nowosielski | M. Spilka
Volume: 48
Issue: 2
Year: 2011
The influence of initial powder properties on the mechanical alloying process and the final powders structure PDF available

Author(s): W. Pilarczyk | R. Nowosielski | M. Szymczak
Volume: 48
Issue: 2
Year: 2011
Thermal stability and GFA parameters of Fe-Co-based bulk metallic glasses PDF available

Author(s): R. Nowosielski | A. Januszka
Volume: 48
Issue: 2
Year: 2011
Fe-based bulk metallic glasses prepared by centrifugal casting method PDF available

Author(s): R. Nowosielski | R. Babilas
Volume: 48
Issue: 2
Year: 2011
Structure and physical properties of Fe-based metallic glasses with Ni and Co addition PDF available

Author(s): S. Lesz | R. Nowosielski
Volume: 48
Issue: 2
Year: 2011
Effect of the front electrode metallisation process on electrical parameters of a silicon solar cell PDF available

Author(s): L.A. Dobrzański | M. Musztyfaga
Volume: 48
Issue: 2
Year: 2011
The application of Zurek’s rheological model for description of mechanical behaviour of textiles subjected to different state of loads PDF available

Author(s): W. Żurek | M. Chrzanowski | W. Sybilska | I. Jałmużna
Volume: 43
Issue: 2
Year: 2010
Simulation of the microhardness and internal stresses measurement of PVD coatings by use of FEM PDF available

Author(s): A. Śliwa | L.A. Dobrzański | W. Kwaśny | M. Staszuk
Volume: 43
Issue: 2
Year: 2010
Optimization of hydraulic dampers with the use of Design For Six Sigma methodology PDF available

Author(s): D. Sławik | P. Czop | A. Król | G. Wszołek
Volume: 43
Issue: 2
Year: 2010
The evolutionary optimization of selected welded structures PDF available

Author(s): G. Kokot | A. John | W. Kuś
Volume: 43
Issue: 2
Year: 2010
Application of multiple regression and neural networks to synthesize a model for peen forming process planning PDF available

Author(s): S. Delijaicov | A.T. Fleury | F.P.R. Martins
Volume: 43
Issue: 2
Year: 2010
Structure and properties of sintered tool gradient materials PDF available

Author(s): L.A. Dobrzański | B. Dołżańska
Volume: 43
Issue: 2
Year: 2010
On burr height estimation based on axial drilling force PDF available

Author(s): A. Sokołowski
Volume: 43
Issue: 2
Year: 2010
Foresight methods application for evaluating laser treatment of hot-work steels PDF available

Author(s): A.D. Dobrzańska-Danikiewicz | E. Jonda | K. Labisz
Volume: 43
Issue: 2
Year: 2010
Large capacity cnergy from Geo- Plutonic formation for power plants with zero CO2 emissions PDF available

Author(s): R.H. Kozłowski | B.M. Zakiewicz
Volume: 43
Issue: 2
Year: 2010
Non-destructive method of determination of elastic properties and adhesion coefficient of different coating materials PDF available

Author(s): M. Kubisztal | A. Chrobak | G. Haneczok
Volume: 43
Issue: 2
Year: 2010
Effect of cooling rate and aluminum contents on the Mg-Al-Zn alloys’ structure and mechanical properties PDF available

Author(s): L.A. Dobrzański | M. Król | T. Tański
Volume: 43
Issue: 2
Year: 2010
Mechanical properties of ultrasonic washed organic and traditional cotton yarns PDF available

Author(s): M. Uzun | I. Patel
Volume: 43
Issue: 2
Year: 2010
Simulation of mechanical properties of forged and casted steel 42CrMo4 specimen PDF available

Author(s): B. Smoljan | D. Iljkić
Volume: 43
Issue: 2
Year: 2010
High-temperature corrosion resistance of NiAl(Cr)-Al2O3 coating in N2+9%O2+0.2% HCl+0.08%SO2 atmosphere PDF available

Author(s): B. Formanek | B. Szczucka-Lasota
Volume: 43
Issue: 2
Year: 2010
PVD and CVD gradient coatings on sintered carbides and sialon tool ceramics PDF available

Author(s): L.A. Dobrzański | M. Staszuk
Volume: 43
Issue: 2
Year: 2010
Structure and magnetic properties of magnetostrictive Td0.3Dy0.7Fe1.9 / polyurethane composite materials PDF available

Author(s): L.A. Dobrzański | A. Tomiczek | A. Nabiałek | R. Żuberek
Volume: 43
Issue: 2
Year: 2010
Hot-working of advanced high-manganese austenitic steels PDF available

Author(s): L.A. Dobrzański | W. Borek
Volume: 43
Issue: 2
Year: 2010
The methodological fundaments of development state analysis of surface engineering technologies PDF available

Author(s): A. Dobrzańska-Danikiewicz
Volume: 40
Issue: 2
Year: 2010
Strengthening surfaces of machine components by treatment using loose solid balls PDF available

Author(s): Z.A. Stotsko | T.O. Stefanovych
Volume: 40
Issue: 2
Year: 2010
An investigation of machining efficiency of internal roller burnishing PDF available

Author(s): A. Stoić | I. Lacković | J.Kopač | I. Samardžić | D. Kozak
Volume: 40
Issue: 2
Year: 2010
Thixoinfiltration: a new approach to produce cellular and other low density metallic materials PDF available

Author(s): M.H. Robert | A.F. Jorge | F. Gatamorta | R.R. Silva
Volume: 40
Issue: 2
Year: 2010
Wear of plasma nitrided and nitrocarburized AISI 316L austenitic stainless steel PDF available

Author(s): F.A.P. Fernandes | S.C. Heck | R.G. Pereira | A. Lombardi-Neto | G.E. Totten | L.C. Casteletti
Volume: 40
Issue: 2
Year: 2010
Thermal analysis, structure and mechanical properties of the MC MgAl3Zn1 cast alloy PDF available

Author(s): L.A. Dobrzański | M. Król | T. Tański
Volume: 40
Issue: 2
Year: 2010
Shipbuilding pipeline production quality improvement PDF available

Author(s): T. Buksa | D. Pavletic | M. Sokovic
Volume: 40
Issue: 2
Year: 2010
Computer simulation of mechanical properties of quenched and tempered steel specimen PDF available

Author(s): B. Smoljan | D. Iljkić | N. Tomašić
Volume: 40
Issue: 2
Year: 2010
Artificial intelligence-based control system for the analysis of metal casting properties PDF available

Author(s): E. Mares | J.H. Sokolowski
Volume: 40
Issue: 2
Year: 2010
Application of thermovision method to welding thermal cycle analysis PDF available

Author(s): J. Nowacki | A. Wypych
Volume: 40
Issue: 2
Year: 2010
Preparation, structure and properties of Fe-based bulk metallic glasses PDF available

Author(s): R. Nowosielski | R. Babilas
Volume: 40
Issue: 2
Year: 2010
Glow discharge assisted low - temperature nitriding of knives used in wood processing PDF available

Author(s): A. Sokołowska | J. Rudnicki | E. Wnukowski | P. Beer | T. Wierzchoń | K.J. Kurzydłowski
Volume: 37
Issue: 2
Year: 2009
Precise formation the phase composition and the thickness of nitrided layers PDF available

Author(s): J. Ratajski | R. Olik | T. Suszko | J. Dobrodziej | J. Michalski | A. Gilewicz
Volume: 37
Issue: 2
Year: 2009
Hard coatings for woodworking tools – a review PDF available

Author(s): J. Ratajski | W. Gulbiński | J. Staśkiewicz | J. Walkowicz | P. Myśliński | A. Czyżniewski | T. Suszko | A. Gilewicz | B. Warcholiński
Volume: 37
Issue: 2
Year: 2009
Inductive heating and quenching of planetary shafts PDF available

Author(s): B. Kosec | B. Karpe | M. Licen | G. Kosec
Volume: 39
Issue: 2
Year: 2010
Synthesis and characterization of carbon nanotubes decorated with platinum nanoparticles PDF available

Author(s): L.A. Dobrzański | M. Pawlyta | A. Krztoń | B. Liszka | K. Labisz
Volume: 39
Issue: 2
Year: 2010
Integration of part classification, cell formation and capacity adjustment PDF available

Author(s): M. Tolouei-Rad
Volume: 39
Issue: 2
Year: 2010
Modelling of fracture process in concrete reinforced structures under steel corrosion PDF available

Author(s): A.V. Benin | A.S. Semenov | S.G. Semenov
Volume: 39
Issue: 2
Year: 2010
Multilayer, hybrid PVD coatings on Ti6Al4V titanium alloy PDF available

Author(s): W. Pawlak | B. Wendler
Volume: 37
Issue: 2
Year: 2009
AgSnBi powder consolidated by composite mode of deformation PDF available

Author(s): M. Richert | J. Richert | B. Leszczyńska - Madej | A. Hotloś | M. Maślanka | W. Pachla | J. Skiba
Volume: 39
Issue: 2
Year: 2010
Analysis of different substrates for processing into biogas

Author(s): B. Mursec | P. Vindis | M. Janzekovic | M. Brus | F. Cus
Volume: 37
Issue: 2
Year: 2009
Exploring laser-guided metal deposition through a microbe metabolite PDF available

Author(s): H. Hocheng | K.E. Chang | J.H. Chang | J.C. Wang
Volume: 37
Issue: 2
Year: 2009
Effect of cooling rates on sinter-hardened steels PDF available

Author(s): L.A. Dobrzański | M. Musztyfaga
Volume: 37
Issue: 2
Year: 2009
Microstructure and mechanical properties of the Al-Ti alloy with cerium addition PDF available

Author(s): L.A. Dobrzański | K. Labisz | R. Maniara | A. Olsen
Volume: 37
Issue: 2
Year: 2009
Structure and properties of surface layer of hot-work tool steels alloyed using high power diode laser PDF available

Author(s): L.A. Dobrzański | E. Jonda | K. Labisz
Volume: 37
Issue: 2
Year: 2009
Formation of photovoltaic modules based on polycrystalline solar cells PDF available

Author(s): L. A. Dobrzański | A. Drygała | A. Januszka
Volume: 37
Issue: 2
Year: 2009
Morphological aspect of multilaminar PP composite PDF available

Author(s): M. Bilewicz | L.A. Dobrzański | J.C. Viana
Volume: 37
Issue: 2
Year: 2009
Finite Element Method application for determining feedstock distribution during powder injection moulding PDF available

Author(s): A. Śliwa | M. Matula | L.A. Dobrzański
Volume: 37
Issue: 2
Year: 2009
Analytical calculation of the CNC machines servo drives position loop gain PDF available

Author(s): Z. Pandilov | V. Dukovski
Volume: 37
Issue: 2
Year: 2009
Optimization of surface roughness parameters in dry turning PDF available

Author(s): R.A. Mahdavinejad | H. Sharifi Bidgoli
Volume: 37
Issue: 2
Year: 2009
FEM analysis of expandable intramedu- llary nails in healthy and osteoporotic femur PDF available

Author(s): W. Kajzer | A. Kajzer | J. Marciniak
Volume: 37
Issue: 2
Year: 2009
A study on the UNDEX cup forming PDF available

Author(s): A.E. El Mokadem*, A.S. Wifi, I. Salama | A.S. Wifi | I. Salama
Volume: 37
Issue: 2
Year: 2009
Application of the neural network for Mg-Al-Zn mechanical properties modelling PDF available

Author(s): L.A. Dobrzański | M. Król
Volume: 37
Issue: 2
Year: 2009
Crack arrest saturation model under combined electrical and mechanical loadings PDF available

Author(s): R.R. Bhargava | A. Setia
Volume: 37
Issue: 2
Year: 2009
Microstructure evolution in CRCS processed strips of CuCr0,6 alloy PDF available

Author(s): J.P. Stobrawa | Z.M. Rdzawski | W. Głuchowski | W. Malec
Volume: 38
Issue: 2
Year: 2010
Plasma-chemical surface engineering of wood PDF available

Author(s): A. Sokołowska | J. Szawłowski | I. Frąckowiak | J. Rudnicki | P. Boruszewski | P. Beer | A. Olszyna
Volume: 37
Issue: 2
Year: 2009
A method for setting variables in Super Plastic Forming process PDF available

Author(s): N. Cappetti | L. Garofalo | A. Naddeo | M. Nastasia | A. Pellegrino
Volume: 38
Issue: 2
Year: 2010
Springback prediction in V-die bending: modelling and experimentation PDF available

Author(s): M.A. Osman | M. Shazly | A. El-Mokaddem | A.S. Wifi
Volume: 38
Issue: 2
Year: 2010
The efficiency of different machines for controlling of western corn rootworm adults PDF available

Author(s): A.D. Stajnko | M. Janzekovic | B. Mursec | P. Vindis | F. Cus
Volume: 37
Issue: 2
Year: 2009
Chosen aspects of knowledge management in enterprises PDF available

Author(s): A. Kania | M. Spilka
Volume: 38
Issue: 2
Year: 2010
Computer-aided synthesis and analysis of discrete mechanical systems PDF available

Author(s): K. Białas
Volume: 38
Issue: 2
Year: 2010
Efficiency of two non-destructive testing methods to detect defects in polymeric materials PDF available

Author(s): Ł. Wierzbicki | J. Stabik | G. Wróbel | M. Szczepanik
Volume: 38
Issue: 2
Year: 2010
Correlation between spatial distribution of the components of reactive plasma flow and the stoichiometry and defectiveness of deposited coatings PDF available

Author(s): J. Walkowicz | J. Smolik | R. Brudnias | B. Kułakowska-Pawlak | W. Żyrnicki
Volume: 37
Issue: 2
Year: 2009
Influence of cold rolling on the corrosion resistance of austenitic steel PDF available

Author(s): A. Kurc | M. Kciuk | M. Basiagaa
Volume: 38
Issue: 2
Year: 2010
Influence of the vacuum-arc source configuration and arc discharge parameters on the evolution and location of arc spots on the cathode surface PDF available

Author(s): J. Walkowicz | J. Smolik | Z. Słomka | B. Kułakowska-Pawlak | W. Żyrnicki
Volume: 37
Issue: 2
Year: 2009
Corrosion behaviour of the welded steel sheets used in automotive industry PDF available

Author(s): D. Katundi | A. Tosun-Bayraktar | E. Bayraktar | D. Toueix
Volume: 38
Issue: 2
Year: 2010
DLC layers prepared by the PVD magnetron sputtering technique PDF available

Author(s): K.T. Wojciechowski | R. Zybala | R. Mania | J. Morgiel
Volume: 37
Issue: 2
Year: 2009
Determination of thermal diffusivity of carbon/epoxy composites with different fiber content using transient thermography PDF available

Author(s): G. Wróbel | Z. Rdzawski | G. Muzia | S. Pawlak
Volume: 37
Issue: 2
Year: 2009
Application of DLC layers in 3-omega thermal conductivity method PDF available

Author(s): K.T. Wojciechowski | R. Zybala | R. Mania
Volume: 37
Issue: 2
Year: 2009
Studying of spin-coated oxad-Si properties PDF available

Author(s): J. Weszka | L.A. Dobrzański | P. Jarka | J. Jurusik | B. Hajduk | M. Bruma | J. Konieczny | D. Mańkowski
Volume: 37
Issue: 2
Year: 2009
Tribological properties of CrNx coatings PDF available

Author(s): B. Warcholinski | A. Gilewicz
Volume: 37
Issue: 2
Year: 2009
Effect of curing temperature on flexural properties of silica-based geopolymer-carbon reinforced composite PDF available

Author(s): D.H. Tran | D. Kroisová | P. Louda | O. Bortnovsky | P. Bezucha
Volume: 37
Issue: 2
Year: 2009
The application of CVD diamond films in cyclic voltammetry PDF available

Author(s): R. Torz-Piotrowska | A. Wrzyszczyński | K. Paprocki | M. Szreiber | C. Uniszkiewicz | E. Staryga
Volume: 37
Issue: 2
Year: 2009
The investigation of hardenability of low alloy structural cast steel PDF available

Author(s): I. Telejko | H. Adrian | K. Skalny | M. Pakiet | R. Staśko
Volume: 37
Issue: 2
Year: 2009
Microstructure and properties of CuNi2Si1 alloy processed by continuous RCS method PDF available

Author(s): J. Stobrawa | Z. Rdzawski | W. Głuchowski | W. Malec
Volume: 37
Issue: 2
Year: 2009
The mechanical characteristics of phos- phate glasses under high temperature and friction-induced cross-linking processes PDF available

Author(s): Z. Pawlak | P.K.D.V. Yarlagadda | R. Frost | D. Hargreaves
Volume: 37
Issue: 2
Year: 2009
Microstructure and characteristics of high dimension brazed joints of cermets and steel PDF available

Author(s): J. Nowacki | M. Kawiak
Volume: 37
Issue: 2
Year: 2009
The quality management system in education - implementation and certification PDF available

Author(s): J. Michalska-Ćwiek
Volume: 37
Issue: 2
Year: 2009
Systemic approach to problems of the quality in education PDF available

Author(s): M.T. Roszak
Volume: 37
Issue: 2
Year: 2009
Quality assurance in the european higher education area PDF available

Author(s): T. Karkoszka
Volume: 37
Issue: 2
Year: 2009
Functioning of the university focused on the quality and continuous improvement PDF available

Author(s): M. Dudek-Burlikowska
Volume: 37
Issue: 2
Year: 2009
Klystron pulse modulator of linear electron accelerator: test results PDF available

Author(s): Z. Zimek | Z. Dźwigalski | S. Warchoł | K. Roman | S. Bułka
Volume: 37
Issue: 2
Year: 2009
Parylene coatings on biological specimens PDF available

Author(s): A. Nosal | A. Zydorczyk | A. Sobczyk-Guzenda | L. Głuchowski | H. Szymanowski | M. Gazicki-Lipman
Volume: 37
Issue: 2
Year: 2009
Investigation of surface properties of high temperature nitrided titanium alloys

Author(s): E. Koyuncu | F. Kahraman | Ö. Karadeniz
Volume: 37
Issue: 2
Year: 2009
Effects of B4C addition on the micro- structural and thermal properties of hot pressed SiC ceramic matrix composites PDF available

Author(s): Z. Keçeli | H. Ögünç | T. Boyraz | H. Gökçe | O. Addemir | M. Lütfi Öveçoğlu
Volume: 37
Issue: 2
Year: 2009
Influence of chemical heat treatment on the mechanical properties of paper knife-edge die PDF available

Author(s): K. Dybowski | Ł. Kaczmarek | R. Pietrasik | J. Smolik | Ł. Kołodziejczyk | D. Batory | M. Gzik | M. Stegliński
Volume: 37
Issue: 2
Year: 2009
Structure and properties of selected Fe-based metallic glasses PDF available

Author(s): R. Nowosielski | R. Babilas
Volume: 37
Issue: 2
Year: 2009
HR TEM examinations of nanodiamond particles for biomedical application PDF available

Author(s): K. Mitura
Volume: 37
Issue: 2
Year: 2009
Phases morphology and distribution of the Al-Si-Cu alloy PDF available

Author(s): K. Labisz | M. Krupiński | L.A. Dobrzański
Volume: 37
Issue: 2
Year: 2009
Optical properties and morphology of PECVD deposited titanium dioxide films PDF available

Author(s): J. Kowalski | A. Sobczyk-Guzenda | H. Szymanowski | M. Gazicki-Lipman
Volume: 37
Issue: 2
Year: 2009
Different diamonds in meteorites - DaG 868 and NWA 3140 ureilites PDF available

Author(s): A. Karczemska | T. Jakubowski | F. Vergas
Volume: 37
Issue: 2
Year: 2009
Application of microwave/radio frequency and radio frequency/magnetron sputtering techniques in polyurethane surface modification PDF available

Author(s): W. Kaczorowski | D. Batory | P. Niedzielski
Volume: 37
Issue: 2
Year: 2009
Surface modification of aluminium - lithium alloy using prenitriding option and SixNy coating deposition PDF available

Author(s): Ł. Kaczmarek | J. Sawicki | K. Kyzioł | D. Siniarski | S. Jonas | M. Stegliński | Ł. Kołodziejczyk | K. Tkacz-Śmiech
Volume: 37
Issue: 2
Year: 2009
Plasma modification of medical implants by carbon coatings depositions PDF available

Author(s): J. Grabarczyk | I. Kotela
Volume: 37
Issue: 2
Year: 2009
Raman spectra evaluation of the carbon layers with Voigt profile PDF available

Author(s): M. Gołąbczak | A. Konstantynowicz
Volume: 37
Issue: 2
Year: 2009
CVD diamond: from growth to application PDF available

Author(s): K. Fabisiak | E. Staryga
Volume: 37
Issue: 2
Year: 2009
Effect of microstructure on impact toughness of duplex and superduplex stainless steels PDF available

Author(s): S. Topolska | J. Łabanowski
Volume: 36
Issue: 2
Year: 2009
Functional properties of the sintered tool materials with (Ti,Al)N coating PDF available

Author(s): L.A. Dobrzański | L. Żukowska | J. Mikuła | K. Gołombek | P. Podstawski
Volume: 36
Issue: 2
Year: 2009
Surface modification of nanodiamonds for biomedical application and analysis by infrared spectroscopy PDF available

Author(s): T. Burleson | N. Yusuf | A. Stanishevsky
Volume: 37
Issue: 2
Year: 2009
Effect of high power diode laser surface melting and cooling rate on microstructure and properties of magnesium alloys PDF available

Author(s): L.A. Dobrzański | T. Tański | J. Domagała | S. Malara | M. Król
Volume: 37
Issue: 2
Year: 2009
Corrosion resistance of the composite materials: nanocrystalline powder – polymer type in acid environment PDF available

Author(s): B. Ziębowicz | M. Drak | L.A. Dobrzański
Volume: 36
Issue: 2
Year: 2009
Why do you need a reservation system?      Save time & money - Smart Internet Solutions