Analysis of thick-walled anisotropic elliptic tube
Author(s): Tomas Mares
Volume: 3
Issue: 9
Year: 2008




Anisotropic elasticity in curvilinear coordinates
Author(s): Tomas Mares
Volume: 3
Issue: 9
Year: 2008




Contact stresses in the human hip joint - review
Author(s): Matej Daniel
Volume: 2
Issue: 8
Year: 2007




Utilization of fatigue life prediction by means of experimental stress analysis methods for the determination of exploitation of the portal gantry cranes
Author(s): Peter Sivak
Volume: 2
Issue: 8
Year: 2007




Identification of the material parameters of an aortic wall
Author(s): Lukáš Horný | Rudolf Žitný | Hynek Chlup | Hana Macková
Volume: 2
Issue: 8
Year: 2007




Determination of the optical constant of orthotropic optically sensitive material
Author(s): Oskar Ostertag
Volume: 2
Issue: 8
Year: 2007




Locally orthotropic material—the foundation of tissue mechanics
Author(s): Tomáš Mareš
Volume: 2
Issue: 7
Year: 2007




Vzpomínka na naše p?edch?dce: Doc. Ing. Old?ich Cais, CSc.
Author(s): Zden?k Kuliš
Volume: 2
Issue: 7
Year: 2007




Automation of stress measurement and stress evaluation with program system PHOTOELAST
Author(s): Oskar Ostertag | Eva Ostertagová
Volume: 2
Issue: 6
Year: 2007




Experimental verification of the in-pipe micromachine Karolína simulation model
Author(s): Michal Kelemen | Tatiana Ma?ašovská
Volume: 2
Issue: 6
Year: 2007




Utilization numerical methods for critical strain of tensile steel
Author(s): Ladislav Novotný
Volume: 2
Issue: 6
Year: 2007




Excentricita u odvrtávací metody
Author(s): Karel Doubrava | Tomáš Mareš | Karel Vítek | Zden?k Kuliš
Volume: 2
Issue: 5
Year: 2007




Laminate tube under bending, shear, and axial load as a Timoshenko beam
Author(s): Tomáš Mareš
Volume: 2
Issue: 5
Year: 2007




Vzpomínka na na¹e pøedch?dce: Prof. Ing. Eugen Pešina, CSc.
Author(s): Ji?ina Masnerová | Zden?k Kuliš
Volume: 2
Issue: 5
Year: 2007




Vzpomínka na naše p?edch?dce: Prof. Ing. Emanuel Hájek, CSc.
Author(s): Ji?ina Masnerová | Zden?k Kuliš | František Valenta
Volume: 2
Issue: 5
Year: 2007




Vzpomínka na naše p?edch?dce: Prof. Ing. Jaroslav Šolín
Author(s): Ji?ina Masnerová | Zden?k Kuliš
Volume: 2
Issue: 5
Year: 2007




Resorpce kosti u krcku implantátu v porovnánàs matematickými modely
Author(s): Tomáš Goldmann | Lucie Himmlová | Alois Kácovský
Volume: 1
Issue: 4
Year: 2005




Experimental determination of elastic coefficients of dry bovine bone
Author(s): Tomáš Goldmann | Hanuš Seiner | Michal Landa
Volume: 1
Issue: 4
Year: 2005




Vehicle with navigation in unknown environment
Author(s): Jozef Tomcik
Volume: 1
Issue: 4
Year: 2005




Simulation of the in-pipe machine locomotion based on the innertial stepping principle
Author(s): Michal Kelemen | Tatiana Maťašovská
Volume: 1
Issue: 4
Year: 2005




Biomechanical model of the shear stress distribution in the femoral neck
Author(s): Blaž MavÄiÄ | Miran KrižanÄiÄ | Oskar Zupanc | AleÅ¡ IgliÄ | Veronika Kralj-IgliÄ
Volume: 1
Issue: 4
Year: 2005




Analysis interaction polymer, metal sleeve and metal piping
Author(s): Peter Sivák | Oskar Ostertag | VladimÃr IvanÄo | Karol Kostolný
Volume: 1
Issue: 4
Year: 2005




Simulations and measurements as a tool for improvement of the mold injection machine parameters
Author(s): Peter Sivák | Oskar Ostertag | Ján Blanár
Volume: 1
Issue: 4
Year: 2005




Stiffness maximization of laminate plates and tubes - Resume of PhD Thesis
Author(s): Tomáš Mareš
Volume: 1
Issue: 3
Year: 2005




Castigliano theorem - statically indeterminate structures in tension
Author(s): VladimÃr Å vehla
Volume: 1
Issue: 3
Year: 2005




Introduction to mathematical theory of optimal process
Author(s): Tomáš Mareš
Volume: 1
Issue: 3
Year: 2005




Remebering ancestors - Prof. Ing. Dr. Viktor FELBER
Author(s): Zdeněk Kuliš | Jiřina Masnerová
Volume: 1
Issue: 3
Year: 2005




Remebering ancestors - Prof. Ing. Ferdinand BUDINSKÃ, DrSc.
Author(s): Zdeněk Kuliš | Jiřina Masnerová
Volume: 1
Issue: 3
Year: 2005




Reliability of a Two-Scan Ultrasonography Method for Evaluating Patellar Tendon Stiffness
Author(s): Hsin-Yi Liu | Paul S. Weinhold
Volume: 6
Issue: 22
Year: 2010




Orientations of collagen fibers in aortic histological section
Author(s): Lukas Horny | Jakub Kronek | Hynek Chlup | Rudolf Zitny | Jan Vesely | Martin Hulan
Volume: 6
Issue: 22
Year: 2010




Description of the stress distribution around the crack front in the case of thin structures
Author(s): Martin Sevcik | Pavel Hutar | Lubos Nahlik
Volume: 6
Issue: 22
Year: 2010




Experimental Verification of Conjugated Strength Criterion
Author(s): František Fojtík | Martin Fusek
Volume: 6
Issue: 22
Year: 2010




Development and optimization of the headrests seat according the signal Whiplash
Author(s): Michal Petru Petru
Volume: 6
Issue: 22
Year: 2010




Model of Behavior at Pulling of the Reinforced Concrete of Waved Fibers
Author(s): Bouzeroura Mansour
Volume: 6
Issue: 21
Year: 2010




Mullins effect in an aorta and limiting extensibility evolution
Author(s): Lukáš Horný | Eva Gultova | Hynek Chlup | Radek Sedlá?ek | Jakub Kronek | Jan Veselý | Rudolf Žitný
Volume: 6
Issue: 21
Year: 2010




Dynamical Analysis of Elastic Rod: Example of Using Free Software
Author(s): Tomáš Mareš | Marek Štefan
Volume: 6
Issue: 21
Year: 2010




Dynamic Testing of Plates for Distal Femur Osteosynthesis
Author(s): Miloslav Vilimek | Radek Sedlacek
Volume: 6
Issue: 21
Year: 2010




Calculated and Measured Strength of a Composite Aircraft Undercarriage Spar
Author(s): Vilém Pompe
Volume: 6
Issue: 21
Year: 2010




Determination of elastic constants of novel concept 3D composite
Author(s): Milan R?ži?ka | Ji?í Had | Viktor Kulíšek | Ond?ej Prejzek
Volume: 5
Issue: 20
Year: 2010




Numerical Analysis of the Posterior Fixation System Numerical Analysis of the Posterior Fixation System
Author(s): Tomas Bouda | Zdenek Horak
Volume: 5
Issue: 20
Year: 2010




Comparative Study of Macro vs. Micro Test of Osteoporotic Rat Bones
Author(s): Jana Vondrova | Jaroslav Lukes | Radek Sedlacek | Tomas Suchy | Pavel Ruzicka
Volume: 5
Issue: 20
Year: 2010




Improvements of two criteria for multiaxial fatigue limit evaluation
Author(s): Jan Papuga
Volume: 5
Issue: 20
Year: 2010




Dynamic Testing of Nails for Proximal Tibia Osteosynthesis
Author(s): Miloslav Vilimek | Radek Sedlacek
Volume: 5
Issue: 20
Year: 2010




Nonlinear system identification using neuro-fuzzy models
Author(s): Marek Å tefan
Volume: 1
Issue: 2
Year: 2005




Stiffness maximisation applied to frame trusses
Author(s): Tomáš Mareš
Volume: 1
Issue: 2
Year: 2005




Methods and approaches to topology optimisation
Author(s): Tomáš Mareš
Volume: 1
Issue: 2
Year: 2005




Metodological approach in structural optimisation
Author(s): Tomáš Mareš
Volume: 1
Issue: 2
Year: 2005




Remembering ancestors: Prof. Ing. Karel Spála
Author(s): Jiřina Másnerová | Zdeněk Kuliš
Volume: 1
Issue: 2
Year: 2005




A novel methodology for in vivo monitoring of chewing forces acting on a single lower molar during bolus processing
Author(s): Tomas Goldmann | Lucie Himmlová
Volume: 5
Issue: 19
Year: 2009




Effect of Laminectomy on Stability of Lumbar Spine Effect of Laminectomy on Stability of Lumbar Spine
Author(s): Petr Tichy | Zdenek Horak | Jana Sindelarova
Volume: 5
Issue: 19
Year: 2009




Evaluation of the Poisson's ratio from the 3D laser scanning data
Author(s): Lovre Krstulovic-Opara | Matej Vesenjak | Petar Marendic | Zoran Ren | Zeljko Domazet
Volume: 5
Issue: 19
Year: 2009




Residual Modes for Structure Reduction and Efficient Coupling of Substructures
Author(s): Zbynek Šika | Jan Zavrel | Michael Valasek
Volume: 5
Issue: 19
Year: 2009




Integral Approach for Endurance Limit Evaluation on Shrink-Fitted Assemblies
Author(s): Erhard Leidich | Jakub Vidner | Bohumil Bruzek
Volume: 5
Issue: 18
Year: 2009




Wheeled locomotion inside pipe
Author(s): Jozef Bocko | Michal Kelemen | Tatiana Kelemenova | Jaromír Jezný
Volume: 5
Issue: 18
Year: 2009




Strength parameters of unidirectional and quasi-unidirectional composite
Author(s): Radek Kottner
Volume: 5
Issue: 18
Year: 2009




Design of composite seat post for cycle-ball bicycle frame
Author(s): Tomas Kroupa
Volume: 5
Issue: 17
Year: 2009




Experimental Analysis of the Temporomandibular Disc Movement During Mouth Opening
Author(s): Jan Krystufek | Zdenek Horak | Martina Fricova | Radek Jirman
Volume: 5
Issue: 17
Year: 2009




Validation and Application of Iterative Coupling to Poroelastic Problems in Bone Fluid Flow
Author(s): Grant Carr Goulet
Volume: 5
Issue: 17
Year: 2009




The Role of Viscoelasticity in Biomechanics
Author(s): Antonin Havranek
Volume: 5
Issue: 17
Year: 2009




Innovative concept of increasing dynamic stiffness of compliant structures by mechatronic approach
Author(s): Michael Valasek | Martin Necas
Volume: 4
Issue: 16
Year: 2009




Design Parameters Influence on Office Chairs Comfort
Author(s): Francesca Cosmi | Marco Hoglievina | Andrea Giavon
Volume: 4
Issue: 16
Year: 2009




Biomechanics of budding of cellular membranes
Author(s): Ales Iglic | Marusa Lokar | Peter Veranic | Henry Hagerstrand | Veronika Kralj-Iglic
Volume: 4
Issue: 16
Year: 2009




Four legged robot with feedback control of legs motion
Author(s): Tatiana Kelemenova | Michal Kelemen | Jaromir Jezny
Volume: 4
Issue: 16
Year: 2009




The Multiobjective Optimization of Machine Tool Construction by a Global Computation in a Whole Workspace
Author(s): Michael Valasek | Jan Zavrel | Zbynek Sika | Tomas Vampola
Volume: 4
Issue: 16
Year: 2009




Mobot Contact Benchmark for Efficient Multibody System Time Integration
Author(s): Michael Valasek
Volume: 4
Issue: 15
Year: 2009




Control of Translational Motion of Flexible Bodies by “Wave Method”
Author(s): Michael Valasek | Ondrej Marek
Volume: 4
Issue: 15
Year: 2009




Homogenization of Composite Plate Structures
Author(s): Alena Zemanová
Volume: 4
Issue: 15
Year: 2009




Experimental Verification of Correlation between Objective and Subjective Evaluation of Passenger Car Vibration Comfort
Author(s): Michael Valasek | Jan Pelikan | Jaroslav Ulehla | Ondrej Vaculin | Pavel Steinbauer
Volume: 4
Issue: 15
Year: 2009




Identification of Phenomenological Shock Absorber Model Using Neuro-Fuzzy Method
Author(s): Zbyn?k Šika | Václav Bauma | Michael Valášek | Aleš Bílkovský | Pavel Kukula | Pavel Steinbauer
Volume: 4
Issue: 15
Year: 2009




One dimensional elastic infinite composit media discretized by boundary point method explored from convergence point of view
Author(s): Jan Novak
Volume: 4
Issue: 14
Year: 2008




Failure prediction of composite materials
Author(s): Vladislav Las | Robert Zemcík | Tomás Kroupa | Radek Kottner
Volume: 4
Issue: 14
Year: 2008




Two-step homogenization of asphalt mixtures
Author(s): Richard Valenta | Michal Šejnoha
Volume: 4
Issue: 14
Year: 2008




Curvilinear tensor analysis of an elastic heterogenous epicycloidal thick walled tube
Author(s): Tomas Mares
Volume: 4
Issue: 14
Year: 2008




Temperature non-uniformities and risk of overheating at a direct ohmic heating of foods
Author(s): Jaromir Stancl | Michal Novy | Rudolf Zitny
Volume: 4
Issue: 14
Year: 2008




Two Step Homogenization of Effective Thermal Conductivity for Macroscopically Orthotropic C/C composites
Author(s): Jan Vorel | Jan Sýkora | Michal Šejnoha
Volume: 4
Issue: 14
Year: 2008




Modeling of thermal pressure forming of starch materials
Author(s): Rudolf Zitny | Jan Skocilas
Volume: 4
Issue: 14
Year: 2008




Evaluation of effective conductivities for masonry with interfaces
Author(s): Jan Sýkora | Jan Vorel | Michal Šejnoha
Volume: 4
Issue: 13
Year: 2008




Applicability of the Bi-material Notch Model to Analysis of Failure Initiation in Compound Structures
Author(s): Jan Klusák | Zdenek Knésl
Volume: 4
Issue: 13
Year: 2008




Flexible structures moving using "wave-based method"
Author(s): Ondrej Marek
Volume: 4
Issue: 13
Year: 2008




FETI-based Homogenization of Composites with Perfect Bonding and Debonding of Constituents
Author(s): Pavel Gruber
Volume: 4
Issue: 13
Year: 2008




Computational Model for Strength Analysis of Wrapped Pin Joint of Composite/Metal
Author(s): Radek Kottner
Volume: 4
Issue: 13
Year: 2008




Homogenization of lipid membranes via statistical mechanics
Author(s): Tomas Mares | Matej Daniel
Volume: 4
Issue: 13
Year: 2008




Simulace adaptacnich a hojivych procesu kostni tkane
Author(s): Jaroslav Vtipil
Volume: 3
Issue: 12
Year: 2008




A Calculation Method of Hollow Circular Composite Beam Under General Loadings
Author(s): Sun Jiang | Milan Ruzicka
Volume: 3
Issue: 12
Year: 2008




Numerical and experimental analysis of stress waves in thin steel plate
Author(s): Radek Kolman
Volume: 3
Issue: 12
Year: 2008




Motion and muscle force analysis of human arm
Author(s): Miloslav Vilimek
Volume: 3
Issue: 11
Year: 2008




Mechanobiosensors based on biological membrane
Author(s): Matej Daniel
Volume: 3
Issue: 11
Year: 2008




Matematický model elektromechanického srde?ního kontraktilního aparátu - elektronické “k.o.” Na+/Ca2+ vým?níku
Author(s): Martin Fischer | Mikuláš Ml?ek | Svatava Konvi?ková | Otomar Kittnar
Volume: 3
Issue: 10
Year: 2008




Various influences on successful outcome after the trans-femoral amputation - a case of trans-femoral amputee due to osteosarcoma
Author(s): Marija Ipavec
Volume: 3
Issue: 10
Year: 2008




Computer-aided experimental testing in photoelasticity
Author(s): Oskar Ostertag | Eva Ostertagová | Ladislav Novotný
Volume: 3
Issue: 10
Year: 2008




Castigliano theorem - statically indeterminate problems
Author(s): VladimÃr Å vehla
Volume: 1
Issue: 1
Year: 2005




Laminate tube stiffness maximization by winding angle control
Author(s): Tomáš Mareš
Volume: 1
Issue: 1
Year: 2005




History of the Department of Mechanics from estabilishment to academic year 2003/2004
Author(s): Zdeněk Kuliš
Volume: 1
Issue: 1
Year: 2005



