Academic Journals Database
Disseminating quality controlled scientific knowledge

Applied and Computational Mechanics

ISSN: 1802--680X
Publisher: University of West Bohemia, Pilsen


ADD TO MY LIST
 
Dynamic response of nuclear fuel assembly excited by pressure pulsations

Author(s): Zeman V. | Hlaváč Z.
Volume: 6
Issue: 2
Year: 2012
Self-contained gas turbine unite with turbine expander drive of the compressor for the gas distribution station

Author(s): Zaryankin A. | Arianov S. | Storoguk S. | Rogalev A.
Volume: 6
Issue: 2
Year: 2012
Thermoelastic wave propagation in laminated composites plates

Author(s): Verma K. L.
Volume: 6
Issue: 2
Year: 2012
Buckling analysis of thick isotropic plates by using exponential shear deformation theory

Author(s): Sayyad A. S. | Ghugal Y. M.
Volume: 6
Issue: 2
Year: 2012
Influence of crucial parameters of the system of an inverted pendulum driven by fibres on its dynamic behaviour

Author(s): Polach P. | Hajžman M. | Šika Z.
Volume: 6
Issue: 2
Year: 2012
Flexural analysis of deep beam subjected to parabolic load using refined shear deformation theory

Author(s): Ghugal Y. M. | Dahake A. D.
Volume: 6
Issue: 2
Year: 2012
Modeling of damage evaluation in thin composite plate loaded by pressure loading

Author(s): Dudinský M. | Žmindák M. | Frnka P.
Volume: 6
Issue: 2
Year: 2012
Vibration analysis of tapered rotating composite beams using the hierarchical finite element

Author(s): Ghayour R. | Ghayour M. | Ziaei-Rad S.
Volume: 4
Issue: 2
Year: 2010
Application of selected multi-axial fatigue criteria on the results of non-proportional fatigue experiments

Author(s): Fojtík F. | Fuxa J. | Poruba Z.
Volume: 4
Issue: 2
Year: 2010
Modelling and modal properties of nuclear fuel assembly

Author(s): Zeman V. | Hlaváč Z.
Volume: 5
Issue: 2
Year: 2011
Adaptive calibration method with on-line growing complexity

Author(s): Skopec T. | Šika Z.
Volume: 5
Issue: 2
Year: 2011
Vibration of imperfect rotating disk

Author(s): Půst L. | Pešek L.
Volume: 5
Issue: 2
Year: 2011
A design influence on the mechanical compliance and fracture resistance of railway wheel

Author(s): Navrátil P. | Janíček P. | Brabenec L. | Matug M. | Marcián P.
Volume: 5
Issue: 2
Year: 2011
Biomechanical study of the bone tissue with dental implants interaction

Author(s): Marcián P. | Borák L. | Florian Z. | Bartáková S. | Konečný O. | Navrátil P.
Volume: 5
Issue: 2
Year: 2011
Contact of screw surfaces with displaced axes

Author(s): Machulda V. | Švígler J.
Volume: 5
Issue: 2
Year: 2011
Car impact to pedestrian – fast 2D numerical analysis

Author(s): Hynčík L. | Čechová H.
Volume: 5
Issue: 2
Year: 2011
A time stepping method in analysis of nonlinear structural dynamics

Author(s): Gholampour A. A. | Ghassemieh M. | Razavi H.
Volume: 5
Issue: 2
Year: 2011
Stress analysis of finite length cylinders of layered media

Author(s): Desai P. | Kant T.
Volume: 5
Issue: 2
Year: 2011
Modelling of the mechanical behaviour of porcine carotid artery undergoing inflation-deflation test

Author(s): Vychytil J. | Moravec F. | Kochová P. | Kuncová J. | Švíglerová J.
Volume: 4
Issue: 2
Year: 2010
Reconstruction of a fracture process zone during tensile failure of quasi-brittle materials

Author(s): Veselý V. | Frantík P.
Volume: 4
Issue: 2
Year: 2010
Numerical approximation of flow in a symmetric channel with vibrating walls

Author(s): Sváček P. | Horáček J.
Volume: 4
Issue: 2
Year: 2010
Numerical simulation of airflow through the model of oscillating vocal folds

Author(s): Prokopová J. | Feistauer M. | Horáček J. | Kučera V.
Volume: 4
Issue: 2
Year: 2010
Ductile-brittle behavior at blunted cavities in 3D iron crystals uncovered and covered by copper atoms

Author(s): Pelikán V. | Hora P. | Červená O. | Spielmannová A. | Machová A.
Volume: 4
Issue: 2
Year: 2010
Shape optimization of a Timoshenko beam together with an elastic foundation

Author(s): Machalová J. | Netuka H. | Šimeček R.
Volume: 4
Issue: 2
Year: 2010
Validation of the adjusted strength criterion LaRC04 for uni-directional composite under combination of tension and pressure

Author(s): Krystek J. | Kottner R. | Bek L. | Laš V.
Volume: 4
Issue: 2
Year: 2010
Complex model of the lower urinary tract

Author(s): Brandner M. | Egermaier J. | Kopincová H. | Rosenberg J.
Volume: 6
Issue: 2
Year: 2012
Constitutive modelling of an arterial wall supported by microscopic measurements

Author(s): Vychytil J. | Kochová P. | Tonar Z. | Kuncová J. | Švíglerová J.
Volume: 6
Issue: 1
Year: 2012
Energy transformation and flow topology in an elbow draft tube

Author(s): Štefan D. | Rudolf P. | Skoták A. | Motyčák L.
Volume: 6
Issue: 1
Year: 2012
Design of a large deformable obstacle for railway crash simulations according to the applicable standard

Author(s): Špirk S. | Kemka V. | Kepka M. | Malkovský Z.
Volume: 6
Issue: 1
Year: 2012
Dynamic behavior of Jeffcott rotors with an arbitrary slant crack orientation on the shaft

Author(s): Ramezanpour R. | Ghayour M. | Ziaei-Rad S.
Volume: 6
Issue: 1
Year: 2012
Springback analysis of thermoplastic composite plates

Author(s): Padovec Z. | Růžička M. | Stavrovský V.
Volume: 6
Issue: 1
Year: 2012
FEM simulation of the size and constraining effect in lead free solder joints

Author(s): Lederer M. | Khatibi G. | Weiss B.
Volume: 6
Issue: 1
Year: 2012
Determination of Lamb wave dispersion curves by means of Fourier transform

Author(s): Hora P. | Červená O.
Volume: 6
Issue: 1
Year: 2012
Modal properties of the flexural vibrating package of rods linked by spacer grids

Author(s): Zeman V. | Hlaváč Z.
Volume: 5
Issue: 1
Year: 2011
Finite element for non-stationary problems of viscoelastic orthotropic beams

Author(s): Zajíček M. | Adámek V. | Dupal J.
Volume: 5
Issue: 1
Year: 2011
Finite element modelling of vocal tract changes after voice therapy

Author(s): Vampola T. | Laukkanen A. M. | Horáček J. | Švec J. G.
Volume: 5
Issue: 1
Year: 2011
Use of electromyography measurement in human body modeling

Author(s): Valdmanová L. | Čechová H.
Volume: 5
Issue: 1
Year: 2011
Using a tensor model for analyzing some aspects of mode-II loading

Author(s): Seitl S. | Fernández-Zúňiga D. | Fernández-Canteli A.
Volume: 5
Issue: 1
Year: 2011
Bending of a nonlinear beam reposing on an unilateral foundation

Author(s): Machalová J. | Netuka H.
Volume: 5
Issue: 1
Year: 2011
Numerical analysis of bypass model geometrical parameters influence on pulsatile blood flow

Author(s): Jonášová A. | Vimmr J. | Bublík O.
Volume: 5
Issue: 1
Year: 2011
Airflow visualization in a model of human glottis near the self-oscillating vocal folds model

Author(s): Horáček J. | Uruba V. | Radolf V. | Veselý J. | Bula V.
Volume: 5
Issue: 1
Year: 2011
New implicit method for analysis of problems in nonlinear structural dynamics

Author(s): Gholampour A. A. | Ghassemieh M.
Volume: 5
Issue: 1
Year: 2011
Determination of principal residual stresses’ directions by incremental strain method

Author(s): Civín A. | Vlk M.
Volume: 5
Issue: 1
Year: 2011
Investigation of the effect of controllable dampers on limit states of rotor systems

Author(s): Zapoměl J. | Ferfecki P. | Liberdová J.
Volume: 6
Issue: 1
Year: 2012
Thin viscoelastic disc subjected to radial non-stationary loading

Author(s): Adámek V. | Valeš F.
Volume: 4
Issue: 1
Year: 2010
Ultrasonic horn design for ultrasonic machining technologies

Author(s): Naď M.
Volume: 4
Issue: 1
Year: 2010
Strain-stress analysis of lower limb with applied fixator

Author(s): Mrázek M. | Florian Z. | Veselý R. | Borák L.
Volume: 4
Issue: 1
Year: 2010
Prediction of brittle fracture of epoxy-aluminum flanging

Author(s): Korbel J. | Schmidt L. E. | Singh B. | Zant N. | Klusák J. | Knésl Z.
Volume: 4
Issue: 1
Year: 2010
Modelling of the bladed disk vibration with damping elements in blade shroud

Author(s): Kellner J. | Zeman V.
Volume: 4
Issue: 1
Year: 2010
Acoustic emission source modeling

Author(s): Hora P. | Červená O.
Volume: 4
Issue: 1
Year: 2010
Shape optimization of supersonic ejector for supersonic wind tunnel

Author(s): Dvořák V.
Volume: 4
Issue: 1
Year: 2010
Finite Element Modeling of Airflow During Phonation

Author(s): Šidlof P. | Lunéville E. | Chambeyron C. | Doaré O. | Chaigne A. | Horáček J.
Volume: 4
Issue: 1
Year: 2010
Effects of Manufacturing Process in Crash Simulations

Author(s): Šašek J. | Pašek M. | Beneš K. | Glac V.
Volume: 4
Issue: 1
Year: 2010
On acoustic band gaps in homogenized piezoelectric phononic materials

Author(s): Rohan E. | Cimrman R.
Volume: 4
Issue: 1
Year: 2010
Numerical solution of gas exhaustion from a reciprocating engine

Author(s): Žaloudek M. | Fořt J. | Deconinck H.
Volume: 4
Issue: 1
Year: 2010
Stress wave radiation from brittle crack extension by molecular dynamics and FEM

Author(s): Hora P. | Červená O. | Uhnáková A. | Machová A. | Pelikán V.
Volume: 7
Issue: 1
Year: 2013
Linearization of friction effects in vibration of two rotating blades

Author(s): Byrtus M. | Hajžman M. | Zeman V.
Volume: 7
Issue: 1
Year: 2013
Influence of delayed excitation on vibrations of turbine blades couple

Author(s): Půst L. | Pešek L.
Volume: 7
Issue: 1
Year: 2013
The mean stress influence on lifetime under high-cycle fatigue combined loading

Author(s): Janoušek J. | Balda M. | Svoboda J.
Volume: 7
Issue: 1
Year: 2013
Experimental and numerical analysis of in- and out- of plane constraint effects on fracture parameters: Aluminium alloy 2024

Author(s): Seitl S. | Hutař P. | García T. E. | Fernández-Canteli A.
Volume: 7
Issue: 1
Year: 2013
A numerical study of wave dispersion curves in cylindrical rods with circular cross-section

Author(s): Valsamos G. | Casadei F. | Solomos G.
Volume: 7
Issue: 1
Year: 2013
Three-body segment musculoskeletal model of the upper limb

Author(s): Valdmanová L. | Čechová H.
Volume: 7
Issue: 1
Year: 2013
Semi-analytic solution to planar Helmholtz equation

Author(s): Tukač M. | Vampola T.
Volume: 7
Issue: 1
Year: 2013
Application of patch test in meshless analysis of continuously non-homogeneous piezoelectric circular plate

Author(s): Staňák P. | Sládek V. | Sládek J. | Krahulec S. | Sátor L.
Volume: 7
Issue: 1
Year: 2013
Why do you need a reservation system?      Save time & money - Smart Internet Solutions