Absorbing Capacity of Accelerated Electrons Flow of Some Polyfunctional Episulphide, Aminothiocarbamide Containing Polyelectrolytes

Author(s): V. A. Dzhafarov
Volume: 2
Issue: 4
Year: 2013

A Preliminary Study: The Influence of Alkali Treatment on Physical and Mechanical Properties of Coir Fiber

Author(s): R.Hari Setyanto | Kuncoro Diharjo | Prabang Setyono | I Made Miasa
Volume: 2
Issue: 4
Year: 2013

Vibro-Acoustic Characterization and Optimization of Periodic Cellular Material Structures (PCMS) for NVH Applications

Author(s): Mohammad A Al-Zubi | Emmanuel O Ayorinde | Mehmet A Dundar | Manjinder Warriach | Yellapu Murty
Volume: 2
Issue: 4
Year: 2013

Performance of Surface Immobilized RGDC 13–93 Bioactive Glass Fiber Rafts and Scaffolds with MLO-A5 Osteogenic Cells In Vitro

Author(s): Vernon Christopher Modglin | Roger F Brown
Volume: 2
Issue: 4
Year: 2013

Study on Channel Features and Mechanism of Clinoptilolite Modified by LaCl3

Author(s): Hai Lin | Quanli Liu | Yingbo Dong | Yuefang Chen | Hanxin Huo | Shuyue Liu
Volume: 2
Issue: 4
Year: 2013

Evaluation of the Coefficient of Friction for Crystalline Fe Grains Long Segregant-Atoms Layers on the Grain Boundaries in Reciprocal Sliding

Author(s): Sergey Bulgarevich | Michael Boiko | Andrew Sidashov
Volume: 2
Issue: 4
Year: 2013

Oxidation of Some Sulfated Carbohydrates: Kinetics and Mechanism of Oxidation of Chondroitin-4-Sulfate by Alkaline Permanganate with Novel Synthesis of Coordination Biopolymer Precursor

Author(s): Ishaq Zaafarany Zaafarany | Adil Gobouri | Refat Hassan
Volume: 2
Issue: 4
Year: 2013

Synthesis of Two Bis-GMA Derivates with Different Size Substituents as Potential Monomer to Reduce the Polymerization Shrinkage of Dental Restorative Composites

Author(s): Ruili Wang | Mo Zhu | Shuang Bao | Fengwei Liu | Xiaoze Jiang | Meifang Zhu
Volume: 2
Issue: 4
Year: 2013

Vibrational Frequencies and Raman Radial Breathing Modes of Multi-Walled Carbon Nanotubes Based on Continuum Mechanics

Author(s): Toshiaki Natsuki | Gan Jet Hong Melvin | Qing-Qing Ni
Volume: 2
Issue: 4
Year: 2013

Identification of Shear Modulus of Gelatin Blended with Carboxymethylcellulose Scaffolds Using Curve Fitting Method from Compressive Test

Author(s): Fasai Wiwatwongwana | Yotthana Khunathon | Wetchayan Rangsri | Nattawit Promma | Somchai Pattana
Volume: 1
Issue: 4
Year: 2012

Polyurea Bearing L-Lysinyl Residue as a Chiral Building Block and Its Application to Optical Resolution

Author(s): Makoto Hatanaka | Yuki Nishioka | Masakazu Yoshikawa
Volume: 1
Issue: 4
Year: 2012

Particle Size of Mechanically Alloyed La0.5Sr0.5Fe0.5Mn0.25Ti0.25O3 Powders Prepared with the Assistance of Ultrasonic Irradiation

Author(s): Azwar Manaf | Mas Ayu Elita Hafizah
Volume: 1
Issue: 4
Year: 2012

Mechanical Properties of Rice Husk Fiiled Cashew Nut Shell Liquid Resin Composites

Author(s): Michael Ikpi Ofem | Muneer Umar | Friday Aje Ovat
Volume: 1
Issue: 4
Year: 2012

Influence of a Controlling Factor on the Unsteady Viscosity Profile of Deoxyhemoglobins

Author(s): S. Moussiliou | S. Massou | A. Essoun
Volume: 1
Issue: 4
Year: 2012

Fusion of Thermal and Visible Acquisitions for Evaluating Production-borne Scratches and Shunts in Photo-Voltaic PV Cells

Author(s): Muneeb Tariq | Mahmoud Abdelhamid | Yuntao Li | Mohammed Omar | Yi Zhou
Volume: 1
Issue: 4
Year: 2012

Development and Challenges on Mining Backfill Technology

Author(s): Yuan Yao | Zengdi Cui | Ruzhou Wu
Volume: 1
Issue: 4
Year: 2012

Effects of Graphite Content and Temperature on Microstructure and Mechanical Properties of Iron-Based Powder Metallurgy Parts

Author(s): Xiaoxun Zhang | Fang Ma | Kai Ma | Xia Li
Volume: 1
Issue: 4
Year: 2012

Effects of Dy2O3 on the Dielectric Property, Phase Composition, and Microstructure of the Low Temperature Sintered Aln Ceramics

Author(s): Huazhong Wu | Xigang Wang | Hua Li
Volume: 1
Issue: 4
Year: 2012

Corrosion Behaviour of Al (6063) Alloy (As-Cast and Age Hardened) in H2SO4 Solution

Author(s): F. A. Ovat | F. O. David | A. J. Anyandi
Volume: 1
Issue: 4
Year: 2012

Impact of Forging Conditions on Plasma Nitrided Hot-forging Dies and Punches

Author(s): Ravindra Kumar | Ram Prakash | J. Alphonsa | Jalaj Jain | A. Pareek | P. A. Rayjada | P. M. Raole | S. Mukherjee
Volume: 1
Issue: 4
Year: 2012

Synthesis of Nano Zno Powder and Study of Its Varistor Behavior at Different Temperatures

Author(s): P. K. Roy
Volume: 1
Issue: 4
Year: 2012

The Effect of Transition Metal on the Optical Properties and Photoactivity of Nano-particulate Titanium Dioxide

Author(s): Liwei Wang | Terry Egerton
Volume: 1
Issue: 4
Year: 2012

Effect of Precursor's Composition and Thickness on Foaming Behavior of Al-Tiintermetallics in Volume Combustion and Self-propagating High-temperature Synthesis Modes

Author(s): Makoto Kobashi | Naoyuki Kanetake | Soshiro Murata
Volume: 1
Issue: 4
Year: 2012

A New Hybrid Material of Textile Reinforced Concrete and Glass Fibre Reinforced Plastic

Author(s): Henrik Funke | Sandra Gelbrich | Lothar Kroll
Volume: 2
Issue: 3
Year: 2013

Quantum Efficiency of Hydroxyl Radical Formation in a Composite Containing Nanocrystalline TiO2 e Zinc Phthalocyanine, and the Nature of the Incident Radiation

Author(s): Paulo S. Batista | Danilo R. de Souza | Rodolfo V. Maximiano | Newton M. Barbosa Neto | Antonio E. H. Machado
Volume: 2
Issue: 3
Year: 2013

Structure-Dependent Electrical, Optical and Magnetic Properties of Mn-Doped BiFeO3 Thin Films Prepared by the Sol-Gel Process

Author(s): Jin Li | Kaitong Liu | Jinbao Xu | Lei Wang | Liang Bian | Fanglong Xu
Volume: 2
Issue: 3
Year: 2013

Magnetic Properties and Raman Spectroscopy of Cr-Doped Bismuth Telluride Nanotubes

Author(s): C. F. Garnero | P. Gyawali | A. Lermechin | I. L. Pegg | J. Philip
Volume: 2
Issue: 3
Year: 2013

Study on Patch Bonding for Recovery of Damaged Carbon Fiber Reinforced Thermoplastics Subjected to Four-Point Bending Load

Author(s): Kiyotaka Obunai | Tadao Fukuta | Koichi Ozaki | Rei Yamagishi | Masahiro Yamamoto
Volume: 2
Issue: 3
Year: 2013

Convection Streams and Macrosegregation Couple Phenomena for Dendritic Solidification Defects in Casting Processes

Author(s): M. O. El-Bealy
Volume: 2
Issue: 3
Year: 2013

Effect of Copper on Tribological Characteristics and Subsurface Structure of Cast Fe-Cr-C Alloys in Sliding Friction

Author(s): Viktor Novytskyi | Volodymyr Havryliuk | Volodymyr Lakhnenko
Volume: 2
Issue: 3
Year: 2013

Magnetic Properties of KGd(WO4)2 Single Crystal Studied by EPR Spectroscopy

Author(s): S. M. Kaczmarek | G. Leniec | T. Bodziony | H. Fuks | T. Skibinski | J. Hanuza | L. Macalik
Volume: 2
Issue: 3
Year: 2013

Interpretation for the Pressure and Temperature Signals of Injection Molding Process

Author(s): Yugang Huang | Suhua Zhao
Volume: 2
Issue: 3
Year: 2013

Combustion of Toluene Catalyzed by Pt/Co3O4/CeO2-ZrO2-SnO2/r-Al2O3

Author(s): Min Yeong Kim | Tomoya Kamata | Toshiyuki Masui | Nobuhito Imanaka
Volume: 2
Issue: 3
Year: 2013

Microstructures and Properties for a Superalloy Powder Mixture Processed by Electron Beam Melting

Author(s): J. Hernandez | L. E. Murr | K. N. Amato | E. Martinez | P. W. Shindo | C. A. Terrazas | E. Rodriguez | F. Medina | R. B. Wicker | S. J. Li | X. Y. Cheng | F. Yang
Volume: 1
Issue: 3
Year: 2012

Fracture Toughness of Multi Walled Carbon Nano Tubes Modfied Polymer Composite in Mode - I

Author(s): J. V. Sai Prasanna Kumar | G. Raghava | A. Joseph Stanley
Volume: 1
Issue: 3
Year: 2012

Force Vibration of Laminated Plates with Various Shapes Subjected to Low-velocity Impact

Author(s): Peiman Yousefi | Sh. Hosseini-Hashemi | M. H. Kargarnovin
Volume: 1
Issue: 3
Year: 2012

RAFT Polymerization Kinetics of a-Methylbenzyl Methacryalte by Dilatometry

Author(s): Guillermo Soriano | Judith Percino | Víctor M. Chapela | Margarita Cerón | María Eugenia Castro
Volume: 1
Issue: 3
Year: 2012

Phase Formation in Thin Films of Cu-In-S Ternary System

Author(s): M. A. Nuriyev
Volume: 1
Issue: 3
Year: 2012

Microwave Produced Tannin-furanic Foams

Author(s): Christian Kolbitsch | Martin Link | Alexander Petutschnigg | Stefanie Wieland | Gianluca Tondi
Volume: 1
Issue: 3
Year: 2012

Anomalous Hardening of Submicron Porous Silver at High Strain Rates

Author(s): Alan F Jankowski | Tanvir Ahmed
Volume: 1
Issue: 3
Year: 2012

Electrical Characteristics Cufe2o4 Thick Film Ceramics with Different Glass Concentrations Fired at 1000 °C for Negative Thermal Coefficient (Ntc) Thermistor

Author(s): Wiendartun Wiendartun | Dani Gustaman Syarif
Volume: 1
Issue: 3
Year: 2012

Nano-Intermetallic Precipitated Al-Based Amorphous Matrix Composite Design by Artificial Neural Network Analysis

Author(s): S. Ganguly | O. A. Ojo | P. P. Chattopadhyay | D. Roy
Volume: 1
Issue: 3
Year: 2012

Piezoresistivity and Mechanical Behavior of Metal-polymer Composites under Uniaxial Pressure

Author(s): Majid Kazemian Abyaneh | Satish Ekar | Sulabha K. Kulkarni
Volume: 1
Issue: 3
Year: 2012

Mechanical Properties of Unidirectional Oriented Strand Board with Flat Vertical Density Profile

Author(s): Costel Barbuta | Pierre Blanchet | Alain Cloutier
Volume: 1
Issue: 3
Year: 2012

Si-SiC Matrix C/C Composite Sliding Wear Mechanism and Their Applications

Author(s): Shigeru Hanzawa
Volume: 1
Issue: 3
Year: 2012

Shape-controlled Synthesis of Dandelion-like Poly(m-phenylenediamine)

Author(s): Tingting Guo | Fang Liao | Zhoufeng Wang | Siwei Yang
Volume: 1
Issue: 3
Year: 2012

Thermopower of Nanocarbon Materials with Different Structure and Phase Composition

Author(s): Iryna Ovsienko | Lyudmyla Matzui | Iryna Pundyk | Yuriy Prylutskyy | Yuri M. Strzhemechny
Volume: 1
Issue: 3
Year: 2012

Preparation and Characterization of the Cobalt Doped Polyaniline/MWCNT Nanocomposites for Supercapacitor Application

Author(s): Soumen Giri | Chapal Kumar Das | Swinderjeet singh kalra
Volume: 1
Issue: 3
Year: 2012

The Effect of Rolling and Crimping on Cell-Seeded Synthetic Scaffolds for the Development of Transcatheter Valves by Tissue Engineering

Author(s): Magdalena Scheuer | Trixi Hollweck | Renè Bombien | Ulrike Haas | Eva Bartok | Cornelia Fano | Martin Dauner | Christoph Schmitz | Bruno Reichart | Bassil Akra
Volume: 1
Issue: 3
Year: 2012

Use of MUF Resin for Improving the Wheat Protein Binder in Particle Boards Made from Agricultural Residues

Author(s): Neda Nikvash | Markus Euring | Alireza Kharazipour
Volume: 2
Issue: 2
Year: 2013

The Effect of Inhibitor Concentrations on the Chemical and Mechanical Properties of Bis-GMA-Based Resin Dental Composites

Author(s): Sanjay Karunagaran | Tien-Min G. Chu
Volume: 2
Issue: 2
Year: 2013

Evaluation of Alkali-Silica Reactivity Using Aggregate Geology, Expansion Limits of Mortar Bars and Concrete Prisms, and Kinetic Model

Author(s): Mohammad S. Islam | Nader Ghafoori
Volume: 2
Issue: 2
Year: 2013

Bamboo: An Alternative Raw Material for Wood and Wood-Based Composites

Author(s): Pannipa Chaowana
Volume: 2
Issue: 2
Year: 2013

Nonlinear Optical Properties of Halogenated Aniline Oligomers

Author(s): Marconi B. S. Costa | Antonio C. Pavao | Ana E. de A. Machado
Volume: 2
Issue: 2
Year: 2013

New Phonon Dynamics in a Diamond Crystal during Post-Annealing

Author(s): Sachiko T. Nakagawa
Volume: 2
Issue: 2
Year: 2013

Compliant and Hard Cu(Ni)-C Nanocomposite Coatings

Author(s): Eric Brannigan | Alan F. Jankowski
Volume: 2
Issue: 2
Year: 2013

Effect of Heat Treatment on Strain Life of Aluminum Alloy AA 6061

Author(s): Adnan N. Abood | Ali H. Saleh | Zainab W. Abdullah
Volume: 2
Issue: 2
Year: 2013

Mechanical Properties and Tribological Behaviour of Recycled Polyethylene/Cow Bone Particulate Composite

Author(s): Agunsoye J. O. | Talabi S. I. | Awe O. | Kelechi H.
Volume: 2
Issue: 2
Year: 2013

Preparation and Research on the Electromagnetic Wave Absorbing Coating with Co-Ferrite and Carbonyl Iron Particles

Author(s): xinwei Ji | Ming Lu | Feng Ye | Qian Zhou
Volume: 2
Issue: 2
Year: 2013

Thermogravimetric Study on Devolatilization Kinetics of Chinalco Anodes during Baking

Author(s): Duygu Kocaefe | Yadian Xie | Yasar Kocaefe | Liu Wei | Shaoling Zou | Anjing Wu
Volume: 2
Issue: 2
Year: 2013

Drying of Clay Slabs during the Falling Rate Period: Optimization and Simulation of the Process Using Diffusion Models

Author(s): Wilton Pereira da Silva | Cleide M. Diniz Pereira da Silva e Silva | Laerson Duarte da Silva | Vera Solange de Oliveira Farias
Volume: 2
Issue: 2
Year: 2013

About Possibility of Development Synergetic Processes in Semiconductors of Type AIIIBV

Author(s): Ada Leyderman | Amin Saidov | Muslim Khashaev | Utkur Rahmonov
Volume: 2
Issue: 2
Year: 2013

Predicting the Dynamic Behavior of Materials with a Nonlinear Modified Voigt Model

Author(s): Marc Delphin Monsia | Yélomè Judicaël Fernando Kpomahou
Volume: 1
Issue: 2
Year: 2012

A New Approach to Synthesizing NiO-YSZ Nanocomposite as Solid-Oxide Fuel-Cell Anode Functional Layers by Electrophoretic Deposition

Author(s): Elahe Hosseini Nezhad | Niloofar Heidari | Mohammadali Ghorbani | Alireza Heidari
Volume: 1
Issue: 2
Year: 2012

Multicomponent Solid Solutions (ZnSe)1-x-y(Si2)x(GaP)y

Author(s): Saidov A. S. | Usmonov Sn. N. | Rakhmonov U. Kh | Kurmantayev A. N. | Bahtybayev A. N.
Volume: 1
Issue: 2
Year: 2012

Effects of the Loading Direction on High Strain Rate Behavior of Woven Graphite/Epoxy Composites

Author(s): Fatih Turan | Mohammad R. Allazad | Sylvanus N. Wosu
Volume: 1
Issue: 2
Year: 2012

Gas Semiconducting Sensors Based on Metal Oxide Nanocomposites

Author(s): L. I. Trakhtenberg | G. N. Gerasimov | V. F. Gromov | T. V. Belysheva | O. J. Ilegbusi
Volume: 1
Issue: 2
Year: 2012

Numerical Modeling of Heat Affected Zone Cracking Tendency during Laser and Hybrid Laser-Arc Welding Processes

Author(s): Zhiguo Gao | O. A. Ojo
Volume: 1
Issue: 2
Year: 2012

The Evaluation of the Influence of Ambient Temperature on the Values of Measured Absorbed Energy and Failure Mechanisms of Materials Utilised for the Means of Containerization

Author(s): Tomas Binar | Oldrich Tesik | Martin Vlkovsky | Martin Rejzek
Volume: 1
Issue: 2
Year: 2012

Mechanical Property Evaluation of Si-SiC Matrix C/C Composite with the Use of Complex Rules

Author(s): Shigeru Hanzawa
Volume: 1
Issue: 2
Year: 2012

Characterization of ZnO substituted 45S5 Bioactive Glasses and Glass - Ceramics

Author(s): Ankesh Kumar Srivastava | Ram Pyare
Volume: 1
Issue: 2
Year: 2012

Performance and Microanalysis of Cement Asphalt Mortar With Admixture of Coal Fly Ash

Author(s): Yuan Yao | Henghu Sun
Volume: 1
Issue: 2
Year: 2012

Synthesis and Characterization of Conjugated Pyridine-(N-diphenylamino) Acrylonitrile Derivatives: Photophysical Properties

Author(s): M. Judith Percino | Víctor M. Chapela | Margarita Cerón | M. Eugenia Castro | Guillermo Soriano-Moro | Enrique Perez-Gutierrez | Francisco Melendez-Bustamante
Volume: 1
Issue: 2
Year: 2012

Effect of Short Fiber Fillers on the Optical Properties of Composite Resins

Author(s): Sufyan Garoushi | Pekka K. Vallittu | Lippo Lassila
Volume: 1
Issue: 2
Year: 2012

Oxidation Behaviour of Ni-Cr-Y2O3 Composite Coatings Synthesised by Sol Enhanced Pulse Electroplating

Author(s): Robert Hoye | Wei Gao
Volume: 1
Issue: 2
Year: 2012

Graphene and MWCNT: Potential Candidate for Microwave Absorbing Materials

Author(s): Chapal Kumar Das | Pallab Bhattacharya | Swinderjeet Singh Kalra
Volume: 1
Issue: 2
Year: 2012

Rheological Study of Polymer--Colloid Complexes of Aluminoxane Particles with Weakly Charged Polyelectrolytes in Semidilute Aqueous Solutions

Author(s): Stanislav Sergeevich Radchenko | Novakov Aleksandrovich Ivan | Philipp Stanislavovich Rdachenko | Aleksandr Sergeevich Ozerin | Ol’ga Alekseevna Manoylina
Volume: 1
Issue: 2
Year: 2012

Fabrication of Porous Fe/TiB2 Composites by Reactive Precursor Method

Author(s): Osayoshi Kato | Makoto Kobashi | Naoyuki Kanetake
Volume: 1
Issue: 2
Year: 2012

Comprehensive Stiffness of Prestressed Lattice Materials

Author(s): Mostafa S.A. Elsayed | Damiano Pasini
Volume: 1
Issue: 2
Year: 2012

Comparison of Microstructures and Properties for a Ni-Base Superalloy (Alloy 625) Fabricated by Electron Beam Melting

Author(s): Krista Amato | J. Hernandez | L. E. Murr | E. Martinez | S. M. Gaytan | P. W. Shindo | S. Collins
Volume: 1
Issue: 2
Year: 2012

Synthesization of CNT on Surface of C/C Composites to Stabilize the Coefficient of Friction through a Wide Environmental Temperature Range

Author(s): Kiyotaka Obunai | Kazuya Okubo | Toru Fujii
Volume: 2
Issue: 1
Year: 2012

Prefabricated Thin-walled Structural Elements Made from High Performance Concrete Prestressed with CFRP Wires

Author(s): Giovanni Pietro Terrasi
Volume: 2
Issue: 1
Year: 2012

Reactivity to Oxidation of Metal Nanopowders after Electron Irradiation

Author(s): Esen Dilmukhambetov | Tilektes Espolov | Madina Ospanova | Alexander Ilyin
Volume: 2
Issue: 1
Year: 2012

Variations in the Electrical Resistivity of Vapour Grown Carbon Fibres by Effect of Successive Operations of Intake and Outgassing of Hydrogen

Author(s): Cesar Mota | Antonio Madronero | Jose Maria Amo | Jose Ignacio Robla | Mario Culebras | Andres Cantarero
Volume: 2
Issue: 1
Year: 2012

Synthesis, Structure and Electric Transport Properties of Sr3NbCrO7

Author(s): Veer Singh | Jaya Dwivedi | Indu Bhushan Sharma
Volume: 2
Issue: 1
Year: 2012

Dielectric and Thermal Properties of Epoxy Resin Nanocomposites Containing Polyhedral Oligomeric Silsesquioxane

Author(s): Miao Pan | Chunling Zhang | Bo Liu | Jianxin Mu
Volume: 2
Issue: 1
Year: 2012

Particle Characterisation and Grinding Behaviour of Gamma-Alumina Slurries Prepared in a Stirred Media Mill

Author(s): Stephen Adegbite
Volume: 2
Issue: 1
Year: 2012

Creep Failures in Laser Welded 316L(N) Stainless Steel Joints

Author(s): D. Harish Kumar | T. Shaktivelu | M. Nanda Gopal | K. S. Chandravathi | K. Laha | S. K. Albert | Hemanth Kumar | B. Shanmugarajan | A. SomiReddy
Volume: 2
Issue: 1
Year: 2012

Strain Life of Shot Peening AA 2024-T4

Author(s): Adnan N. Abood | Ali H. Saleh | Raid K. Salem | Ghaith A. Kadhim | Zainab W. Abdullah
Volume: 2
Issue: 1
Year: 2012

A Review on Reducing Graphene Oxide for Band Gap Engineering

Author(s): Muge Acik | Yves J Chabal
Volume: 2
Issue: 1
Year: 2012

Wavelet Denoising in Electrical Resistance Based Damage Detection of Carbon Fiber Composite Materials

Author(s): Jie Wen | Fred K. Choy | Zhenhai Xia
Volume: 2
Issue: 1
Year: 2012

Synthesis and Fluorescence Properties of Europium - Substituted Lanthanum Polyphosphates

Author(s): Hiroaki Onoda | Takehiro Funamoto
Volume: 2
Issue: 1
Year: 2012

Effect of Mixing Sequence of Polymer and Nanofillers on Thermo Mechanical as well as Morphological Property of the Nanocomposites

Author(s): Goutam Hatui | Chapal Kumar Das | Swinderjeet Singh Kalra | Tanya Basu | C.Y. Yue
Volume: 2
Issue: 1
Year: 2012

Experimental Investigation of the Inhibiting Action of Adenine on the Corrosion of Mild Steel in Acidic Environments

Author(s): Habibat Momoh-Yahaya | Nnabuk O. Eddy | Johnson F. Iyun | Casmir E. Gimba | Emeka E. Oguzie
Volume: 2
Issue: 1
Year: 2012

Brazing of Boron Carbide by Cu-Alloys: Interface Interaction and Mechanical Properties of Joints

Author(s): Michael Aizenshtein | Shay Silhov | Natalya Froumin | Nachum Frage
Volume: 2
Issue: 1
Year: 2012

Effects of Annealing Temperature on Raman Scattering and Electrical Properties of Te-Doped Nanostructured Black Silicon

Author(s): Yuanjie Su | Ting Zhang | Peng Zhang | Jing Jiang | Zhanfei Xiao | Shibin Li | Zhiming Wu | Yadong Jiang
Volume: 2
Issue: 1
Year: 2012

Evaluation of Inter-fiber Bonding in Wood Pulp Fibers by Chemical Force Microscopy

Author(s): Dongbo Yan | Kecheng Li
Volume: 2
Issue: 1
Year: 2012

Ultrasonic NDE Techniques for Impact Damage Inspection on CFRP Laminates

Author(s): Qin Shen | Mohammed Omar | Shan Dongri
Volume: 1
Issue: 1
Year: 2012

Complexes of Th(IV), Zr(IV) and V(IV) with Norfloxacin: Synthesis, Spectroscopic, Thermal, Kinetic Measurements and Antimicrobial Evaluation

Author(s): Abdel Majid A. Adam
Volume: 1
Issue: 1
Year: 2012

Fabrication of Press-molded Products Using Bamboo Powder

Author(s): Shinji Ochi
Volume: 1
Issue: 1
Year: 2012

Fabrication and Characterization of CuO-based Solar Cells

Author(s): Hiroki Kidowaki | Takeo Oku | Tsuyoshi Akiyama | Atsushi Suzuki | Balachandran Jeyadevan | Jhon Cuya
Volume: 1
Issue: 1
Year: 2012

Controlling Transmittance of Visible Light by the Incident Light Angle Using Needle-like TiO2 Particle Arrayed Composite Films

Author(s): Hidetoshi Miyazaki | Masato Miyoshi | Takaaki Otsuka | Shin-ichi Kikitsu | Hisao Suzuki | Toshitaka Ota
Volume: 1
Issue: 1
Year: 2012

Effects of the Contact Geometry on High Strain Rate Behavior of Woven Graphite/Epoxy Composites

Author(s): Fatih Turan | Mohammad R. Allazadeh | Sylvanus N. Wosu
Volume: 1
Issue: 1
Year: 2012

Selectivity of Multi-wall Carbon Nanotube Network Sensoric Units to Ethanol Vapors Achieved by Carbon Nanotube Oxidation

Author(s): Robert Olejnik | Petr Slobodian | Pavel Riha | Petr Saha
Volume: 1
Issue: 1
Year: 2012

A Nonlinear Mechanical Model for Predicting the Dynamics Response of Materials under a Constant Loading

Author(s): Marc Delphin Monsia
Volume: 1
Issue: 1
Year: 2012

Optimization of the Heat Treatment Parameters for Al-Mg-Si Wrought Alloys Using Taguchi Approach

Author(s): Chin-Hui Shen
Volume: 1
Issue: 1
Year: 2012

Study on Polishing DF2 (AISI O1) Steel by Nd: YAG Laser

Author(s): Kelvii Wei GUO | Hon Yuen TAM
Volume: 1
Issue: 1
Year: 2012

Microwave Absorbing Properties of DBSA-doped Polyaniline/BaTiO3-Ni0.5Zn0.5Fe2O4 Nanocomposites

Author(s): Chapal Kumar Das | Avinandan Mandal
Volume: 1
Issue: 1
Year: 2012

Effect of Membrane Properties on Performance of Membrane Distillation for Ammonia Removal

Author(s): Zongli Xie | Manh Hoang | Tuan Duong | Derrick Ng | Puyam Singh | Paramita Ray | A. V. R. Reddy | K. Parashuram | S. Maurya
Volume: 1
Issue: 1
Year: 2012

Characterization of Compressive Damage Behavior of Steel and Aluminum

Author(s): Mohammad R. Allazadeh | Maher K. Itani | Sylvanus N. Wosu
Volume: 1
Issue: 1
Year: 2012

Study on How to Effectively Extract Bamboo Fibers from Raw Bamboo and Wastewater Treatment

Author(s): Nguyen Tien Phong | Toru Fujii | Bui Chuong | Kazuya Okubo
Volume: 1
Issue: 1
Year: 2012

Synthesis and Some Properties of Metal Organic Chemical Vapour Deposited Lithium Chromium Oxide Thin Films

Author(s): Gabriel Osaze Egharevba | Marcus Adebola Eleruja | Oladipupo Osasona | Olumide Oluwole Akinwunmi | Bolutife Olofinjana | Chris Jeynes | Ezekiel Oladele Ajayi
Volume: 1
Issue: 1
Year: 2012