Academic Journals Database
Disseminating quality controlled scientific knowledge

Majlesi Journal of Mechanical Engineering

ISSN: 2008--1421
Publisher: Islamic Azad University, Majlesi Branch


ADD TO MY LIST
 
Analysis of Tow Dimensional Steady-State Heat Conduction Problems by MLPG Method

Author(s): Gholam Hosein Bradaran | Mohammad Javad Mahmoodabadi*
Volume: 4
Issue: 4
Year: 2011
Comparative Investigation in a Turbine Blade Passage Flows with Several Different Turbulence Models

Author(s): Mahmood Ebrahimi | Mohammad Hossein Roozbahani*
Volume: 4
Issue: 4
Year: 2011
Investigation of Process Parameters on Hot Ring Rolling by Coupled Thermo-Mechanical 3D-FEA

Author(s): Amir Hossein Gheisari* | Mohammad Reza Forouzan | Abdol Ali Maracy
Volume: 4
Issue: 4
Year: 2011
The Comparison of the Microstructure and Hardness of Al-B and Al-Mg-B Composites

Author(s): Mohammad Reza Derakhshesh* | Hossein Sina | Hamid Nazemi
Volume: 4
Issue: 4
Year: 2011
The Energy and Exergy Analysis of Single Effect Absorption Chiller

Author(s): Farshad Panahi Zadeh* | Navid Bozorgan
Volume: 4
Issue: 4
Year: 2011
Investigating the Effect of Different Boundary Conditions on the Identification of a Cavity Inside Solid Bodies

Author(s): Mahmud Khodadad | Mohsen Dashti Ardakani*
Volume: 4
Issue: 4
Year: 2011
Frequency Analysis of a Cable with Variable Tension and Variable Rotational Speed

Author(s): Moharam Habibnejad Korayem | Ali Akbar Alipour
Volume: 4
Issue: 4
Year: 2011
Impact Resistance and Optimization ofMetal-Composite-Metal Auto Body Panel Using Response Surface Methodology (RSM)

Author(s): Sadegh Rahmati | J Marzbanrad | H.R. khalili
Volume: 3
Issue: 4
Year: 2010
Dynamic Analysis of a Modified Truck Chassis

Author(s): MohamadReza Forouzan | Rouhollah Hoseini
Volume: 3
Issue: 4
Year: 2010
Numerical Investigation of Nucleating Flows of Steam in a Cascade of Turbine (Effect of Overall Pressure Ratios)

Author(s): Mahmoud Ebrahimi | MohamadHosein Rouzbahani
Volume: 3
Issue: 4
Year: 2010
Thermal Analysis of Workpiece under Electrical Discharge Machining (EDM), Using Hyperbolic Heat Conduction Model

Author(s): Seyfollah Saedodin | Mohsen Torabi | Hadi Eskandar
Volume: 3
Issue: 4
Year: 2010
Finite Element Simulation of C.V. Joint Forging of Prid Using Arbitrary Lagrangian-Eulerian Method

Author(s): MohamadReza Seydi | Mohsen Lohmousavi
Volume: 3
Issue: 4
Year: 2010
Numerical Study on Propagation of Flame in Laminar Pre-Mixed Combustion

Author(s): Ali Lohrasbi
Volume: 3
Issue: 4
Year: 2010
Culling Force Investigation in Turning Process via Ultrasonic Assisted Turning on Al7075 Workpiece

Author(s): Saeed Amini | MohamadJavad Nategh | Amir Abdollah
Volume: 3
Issue: 4
Year: 2010
Investigation of Drawing Ratio Effect on Chart Rupture in Hydroforming Process

Author(s): MohamadAmin Bahari | Rouzbeh Alipour
Volume: 3
Issue: 4
Year: 2010
Effect of Methanol Concentration and Channel Depth on Performance of Direct Methanol Fuel Cell

Author(s): Ebrahim Alizadeh | Kourosh Sedighi | Mousa Farhadi | Mohsen Shakeri
Volume: 3
Issue: 4
Year: 2010
Exergy Analysis and Optimization of Combined Rankin Power and Ejector Refrigeration Cycle

Author(s): MohamadMehdi Rashidi | Payman Lashgari | Mohsen Mehrabi
Volume: 3
Issue: 4
Year: 2010
The Effect of Operational Cutting Parameters in the Wire Electro Discharge Machining (WEDM) on Micro Hardness of Alloy Surface Layer

Author(s): AliAkbar Lotfi | Saeed Daneshmand | Saeed Adib Nazari
Volume: 2
Issue: 4
Year: 2009
Effects of Cooling Air Direction and Velocity on a Branwheat Biscuit’s Temperature in the Cooling Line of Razavi Food Industries Company

Author(s): Ali Sanayeei | Amin Behzad Mehr | Sayed Masoud Hoseini Sarvari
Volume: 2
Issue: 4
Year: 2009
Investigation of Process Parameters, Gate position and its Shape Effect on Dimensional Accuracy of Injected Plastic Part

Author(s): Payman Shahi | AmirHosein Behravesh | Behrouz Arezou | Mehdi Mahmoudi
Volume: 2
Issue: 4
Year: 2009
Investigation and Analysis of CNG Tank Mass Effects On Main Components of Vehicle Performance

Author(s): Khodadad Vahedi | Reza Fathollahi | MohamadReza Emam
Volume: 1
Issue: 4
Year: 2008
Estimation of Thrust Stand Structure Fatigue Life Under Solid Motors Random Vibrations Effects

Author(s): Mojtaba Heydari | Saeed MahjoubMoghadas | Ebrahim Harirbafan | AmirAlaedin Motallebi
Volume: 1
Issue: 4
Year: 2008
Numerical Analyses of Steady Non-Newtonian Flow over Flat Plate on Intermediate Reynolds Numbers by Finite Volume Method

Author(s): Yashar Maghmoumi | Sayed Mahmoud AbolHasan Alavi | MohamadReza Safaei | Iman Nourollahi
Volume: 1
Issue: 4
Year: 2008
Multi Purpose Optimization for Design of Circular Hydrostatic Axial Bearings Using Genetic Algorithm

Author(s): Mohsen Dashti | Asghar Dashti
Volume: 2
Issue: 4
Year: 2009
Vehicle Interior Structure Borne Noise Calculation Using Finite Element Method

Author(s): MohamadHosein Navidfar | Saeed Ziyaee Rad | Mohamad Esfahanian | Amir Khorram
Volume: 2
Issue: 4
Year: 2009
Laboratory Investigation of Austenitic Stress Relieved Spring

Author(s): Yaser Moghani | Crus Aghanajafi | Mehdi Ahmadi
Volume: 2
Issue: 4
Year: 2009
Flow Balance of an Extrusion Die for Production of a U-Shaped Profile

Author(s): Abbas Zolfaghari | Amihosein Behravesh
Volume: 2
Issue: 4
Year: 2009
Shock Suspension System Review and Analysis of Airplane During Landing

Author(s): Mohamad Vaezinejad | Saeed Mahjoub Moghadas | Sadegh Rahmati
Volume: 1
Issue: 4
Year: 2008
Combustion Modeling of Lycopodium Particles by Assuming the Temperature Difference Between Gas and Particle

Author(s): Mehdi Bidabadi | AliReza Rahbari
Volume: 1
Issue: 4
Year: 2008
On Using the Fourth Order Finite Difference Method in Studying Orthotropic Rectangular Plate's Vibration Behavior

Author(s): MohamadHosein Kargarnovin | Kasara Karbaschi | Hasan Hasanzadeh
Volume: 1
Issue: 4
Year: 2008
A Practical Approach to Implementation an Autonomous Soccer Robot

Author(s): AliReza Mohades Kasaei | HamidReza Mohadeskasaei | MohamadReza Mohadeskasaei | Najmeh Ahmadi
Volume: 3
Issue: 4
Year: 2010
Adaptive and Sliding Mode Control for Non- Linear Systems

Author(s): Ahmad Bagheri | MirAbbas Roudbari | MohamadJavad Mahmoudabadi
Volume: 3
Issue: 4
Year: 2010
First Experimental Results of Load Carrying Capacity for a Planar Cable-suspended Manipulator

Author(s): Moharam Habibnejad | M Bamdad | R.M. Zehtab
Volume: 3
Issue: 4
Year: 2010
Design and Manufacture of Clutch Pedal Linkage with Clutch Cable

Author(s): Sadegh Rahmati | Peyvand Najafi
Volume: 1
Issue: 4
Year: 2008
Ultrasonic Assisted Drilling of Bone

Author(s): Vahid Khademi | Javad Akbari | Farzam Farahmand
Volume: 1
Issue: 4
Year: 2008
Machine Tool Design Optimization of High Resolution Parallel Hexapod in Cartesian Workspace

Author(s): M. A. Hosseini | H. R. Mohammadi Daniali
Volume: 4
Issue: 3
Year: 2011
Finite Element Simulation of Plasma Arc Welding Process for Ferrite Stainless Steel

Author(s): A. Moarefzadeh | M. Ahmadi Najafabad
Volume: 4
Issue: 3
Year: 2011
Modal Coefficients Identification Using Wavelet Transform

Author(s): H. Jalali | F. Parvizi
Volume: 4
Issue: 3
Year: 2011
The Effect of Packing on Temperature and Pressure Drop in Mechanical Counter Flow Cooling Tower

Author(s): A. R. Mamouri | H. R. Goshayeshi
Volume: 4
Issue: 3
Year: 2011
Analytical and Numerical Determination of Residual Stresses in Thick Composite Laminated Plates

Author(s): A. R. Ghasemi | H. A. Mashhadi
Volume: 4
Issue: 3
Year: 2011
Optimization of Composite Rotor Blade using Merged Genetic Algorithm and Finite Element Method

Author(s): D. Taherifar | M. Mohseni Shakib | M. Shahabi
Volume: 4
Issue: 3
Year: 2011
Study and Analysis of Al2O3-SiC Nanocomposite Ceramics’ Fracture Toughness using Vickers Indenter

Author(s): A. R. Moradkhani | H. R. Baharvandi | M. Tajdari | A. Vafaeesefat
Volume: 4
Issue: 3
Year: 2011
Creep and Creep-Rupture Characteristics of Lead and Sn70%-30% Lead Alloy

Author(s): Esmaeil Barzekar | MohamadReza Forouzan
Volume: 3
Issue: 3
Year: 2010
2D Model of Floor Surface Roughness in Micro Milling Operation

Author(s): Shahriyar Kournavand | Behnam Motakef Imani
Volume: 3
Issue: 3
Year: 2010
Parametric Analysis of Square Thin Walled Section in Energy Absorption due to Oblique Load

Author(s): Reza Mohamadipour | Khodadad Vahedi | Sayed MohamadReza Emam
Volume: 3
Issue: 3
Year: 2010
The Finite Element Method and Genetic Algorithm Approaches on Shape Optimization of Prosthesis According to Fatigue Behavior

Author(s): Ramin Meshabadi | Sayad Haji Mohamadi | Amir Kazemi
Volume: 3
Issue: 3
Year: 2010
Analysis of the Dynamical Behavior of the Delay Mechanism in a Projectile Motion Controller, Using 3D Finite Element Simulation

Author(s): Salman Naderi | Mehdi SalmaniTehrani | Kourosh Hasanpour
Volume: 3
Issue: 3
Year: 2010
Numerical Analysis of Rectangular Isotropic and Orthotropic Thin Plates Based on the Radial Point Interpolation Method (RPIM)

Author(s): Sayed MohamadMehdi Najafzadeh | Majid Alavi | AliReza Nezam Abadi | Mohsen Kogani | Mehdi Abbasi
Volume: 3
Issue: 3
Year: 2010
Heat Exchangers in A C3MR LNG Plant, Cooling Curves and Their Effects on Efficiency

Author(s): Hamid Safari | Masoud Fasihbeygi
Volume: 3
Issue: 3
Year: 2010
Investigation of Effects of Stress Relieving Parameters on Reduction of Austenitic Spring Free Length During Periodic Loading

Author(s): Yaser Moghani | Mehdi Ahmadi Najafabadi | Cirus Aghanajafi
Volume: 2
Issue: 3
Year: 2009
Feature Recognition of Sheet Metal Components and Strip Layout Design in Bending Progressive Dies using Fuzzy Set Theory

Author(s): Vahid Abedini | Behrouz Arezou | Mohsen Shakeri
Volume: 2
Issue: 3
Year: 2009
Characterization and Determination of Critical Interlaminar Fracture Toughness of Carbon- Epoxy with Arcan Specimen

Author(s): Masoud Nikbakht | Naghdali Choupani
Volume: 2
Issue: 3
Year: 2009
An Investigation in the Deformation Zone of the ECAE Process by the Upper Bound Theorem

Author(s): MohamadJavad Mirnia | Caren Abrinia | Abbas Rastgoo
Volume: 2
Issue: 3
Year: 2009
Numerical Investigation of Heat Transfer in Circular Perforated Plates Exposed to Parallel Flow and Suction

Author(s): Mohamad Moghimian | Behnam Rahmanian | MohamadReza Safaei | Marjan Goudarzi
Volume: 1
Issue: 3
Year: 2008
Analysis of Liquid - Fuel Vortex

Author(s): Esmaeil Esfandiary | Mehran Moradi | Bouzar Ghasemi
Volume: 1
Issue: 3
Year: 2008
Study on Effective Parameters on Machining Power and Presenting the Predictive Models in Machining of EN-AC 48000 Aluminum Alloy

Author(s): Hamid Zarepour | Hessam ShahAli | Esmaeil Soltani
Volume: 1
Issue: 3
Year: 2008
Numerical Study of Increasing Error Order in Finite Difference Method Used for Analyzing the Rectangular Isotropic Plate's Vibration Behavior

Author(s): MohamadHosein Kargarnovin | Kasara Karbaschi | Hasan Hasanzadeh
Volume: 1
Issue: 3
Year: 2008
Modeling and Simulation of Nano Structures with Using Molecular Dynamics

Author(s): Ali Kafash Houshiar | Negin Beryani | Saeed Daneshmand
Volume: 2
Issue: 3
Year: 2009
Optimization of the Manufacturing Process of Natural Fibre Thermoplastic Composites in order to Minimize Warpage

Author(s): Mahmoud Mehrdad Shokrieh | Saman Safari
Volume: 2
Issue: 3
Year: 2009
Using Adaptive Meshing for Solving the Transonic Flow around Airfoils

Author(s): Sayed AmirAbbas Oloumi | Mehran Ameri
Volume: 1
Issue: 3
Year: 2008
Study of Composite Pressure Vessel CNG with Nonmetal Liner Under Low Velocity Impact

Author(s): Abbas Vafaeisefat | Mohammad Tafazoli Harandi
Volume: 1
Issue: 3
Year: 2008
Experimental and Numerical Analysis of Bevel Gear Forge Method and Comparing it with Machining Method

Author(s): Saeed Beheshtian | MohamadAli Sadeghi | Darush Javabvar
Volume: 2
Issue: 3
Year: 2009
Machining Parameters Optimization of Self – Rotating Turing Tools Via Taguchi Method

Author(s): Hosein Esmaeili | Ahmad Afsari | Payam Saraeiyan
Volume: 1
Issue: 3
Year: 2008
Airplane Design Process in the Base of Roskam Method and Application on Design of an Unmanned Air Vehicle

Author(s): MeharanAli Azizi | Hessam Salehipour | Sima Farazi
Volume: 1
Issue: 3
Year: 2008
Numerical Simulation of 2-D Incompressible Flow in Micro Semi-circular Cavity by LBM

Author(s): M. Alafzadeh | Sh. Talebi
Volume: 5
Issue: 2
Year: 2012
Free Chattering Fuzzy Sliding Mode Controllers to Robotic Tracking Problem

Author(s): R. Azarafza | S. M. Hoseini | M. Farrokhi
Volume: 5
Issue: 2
Year: 2012
Using the Bees Algorithm with the Boundary Elements Method to Solve the Inverse Problem of Transient Heat Conduction

Author(s): S. M. M. MizanAdl | M. Dashti Ardakani
Volume: 5
Issue: 2
Year: 2012
Presenting a New Method for High Speed Incremental Forming

Author(s): M. Vahdati | A. R. Vahdati
Volume: 5
Issue: 2
Year: 2012
Evaluation of Using Al2O3/EG and TiO2/EG Nanofluids as Coolants in the Double-tube Heat Exchanger

Author(s): N. Bozorgan | N. Bozorgan
Volume: 5
Issue: 2
Year: 2012
Proportional-derivative Fuzzy Control of Conjugated Polymer Actuators

Author(s): A. A. Amiri Moghadam | M. Maarefdoust
Volume: 5
Issue: 2
Year: 2012
Experimental and Numerical Investigation of Groove Pressed UFG Pure Aluminum

Author(s): A. Sajadi | F. Javanroodi | M. Borhani
Volume: 5
Issue: 2
Year: 2012
Stability of Shear-Thickening and Shear-Thinning Fluids in Narrow Gap between Rotating Cylinders

Author(s): Nariman Ashrafi Khorasani | Habibollah KarimiHaghighi
Volume: 4
Issue: 2
Year: 2011
Statistical Control of Root Dimensions of Gas Turbine Blade in Creep Feed Grinding Process

Author(s): AhmadReza Fazeli | Ebrahim Sharifi
Volume: 4
Issue: 2
Year: 2011
Analysis of Effective Factors on Rail Failure and Exerted Stress on Rail and Wheel

Author(s): Vahid Monfared | Saeed Adibnazari | Habib Esfandiar
Volume: 4
Issue: 2
Year: 2011
Effect of Expulsion on Energy Absorption Capability of Low Carbon Steel Resistance Spot Welds

Author(s): Majid Pouranvari | Pirouz Marashi
Volume: 4
Issue: 2
Year: 2011
Adaptive Control of Chaotic Nonlinear Gyros with Uncertain Coefficients of Dynamical Model

Author(s): Sayed Shahabodin Amelian | HamidReza Koofigar
Volume: 4
Issue: 2
Year: 2011
Finite Volume-Lattice Boltzmann Modeling of Viscous Flows

Author(s): Ahad Zarghami | Mohamad Javad Maghrebi | Jalal Ghasemi
Volume: 4
Issue: 2
Year: 2011
Optimizing Product Design through a Particle Swarm Induced Logistic Regression Model

Author(s): Zohreh Alizadeh Elizee | Abbas Babazadeh | Sayed Mohamad Sayed Hoseini | Zahra Alizadeh Elize
Volume: 3
Issue: 2
Year: 2010
Thermal Radiative Properties of Nanoscale Semiconductors with Incoherent Formulation

Author(s): Sayed AmirAbbas Oloumi | Ahmad Sabounchi | Ahmad Sedaghat
Volume: 3
Issue: 2
Year: 2010
Analyze of 3D Elasto-Static Problems by Meshless Local Petrov-Galerkin Method

Author(s): GholamHosein Baradaran | MohamadJavad Mahmoudabadi | MohamadMehdi Sarfarazi
Volume: 3
Issue: 2
Year: 2010
Effect of Temperature and Co2+ Concentration of Bath on Composition of Zn-Co Alloy Coatings

Author(s): Meysam Heydari | Mahmoud Heydarzadeh
Volume: 3
Issue: 2
Year: 2010
Torque Ripple Minimization in PM Synchronous Motors Using Tooth Shape Optimization

Author(s): Ali Jabbari | Mohsen Shakeri | Ali Navabi Niaki
Volume: 3
Issue: 2
Year: 2010
Die Shape Design in Channel Forming Process by Compensation of Springback Error

Author(s): Arash Behrouzi | Bijan Molaee Dariani | Mahmoud Shakeri
Volume: 3
Issue: 2
Year: 2010
Application of rapid prototyping for development of custom–made orthopedics prostheses: dddddd An investigative study

Author(s): Sadegh Rahmati | Farzam Farahmand | Farid Abbaszadeh
Volume: 3
Issue: 2
Year: 2010
Optimal Motion Generating of VV Nonholonomic Manipulators with Elastic Revolute Joints in VVVVV Generalized Point-to-Point Task

Author(s): Moharam Habibnejad | Hamed Rahimi Nohooji | Amin Nikoobin
Volume: 3
Issue: 2
Year: 2010
The Main Parameters Assessment of Clod and Stone Separation from Potato Crop (Inclined Belt Type) in Potato Harvester

Author(s): Hosein Mosalanejad | Hosein Mobli | Afsaneh Poursoltan
Volume: 3
Issue: 2
Year: 2010
Finite Element Analysis of Self Destruction Mechanism in a Mechanical Controller

Author(s): Kourosh Hasanpour | Mehdi Massah | Mehrdad Poursina | Mehdi Salmani
Volume: 3
Issue: 2
Year: 2010
Numerical Simulation of Laminar and Turbulent Mixed Convection in Rectangular Enclosure with Hot upper Moving Wall

Author(s): MohammadReza Safaiy | HamidReza Goshayeshi
Volume: 3
Issue: 2
Year: 2010
Influence of Element Order in Various Aspect of Evolutionary Structural Optimization

Author(s): Ali GHodousian | Seyfollah Sadodin | Abbas Tabasi
Volume: 3
Issue: 2
Year: 2010
Natural Convection in an Inclined Partitioned Enclosure with Local Heat Source

Author(s): Parnian Safaei | Behzad Ghasemi | Amir Khorram
Volume: 3
Issue: 2
Year: 2010
Analytical and Numerical Investigation of the Deformation Length in Roll Forming Process of Circular Tubes

Author(s): Mehdi SalmaniTehrani | Moslem Bahrami
Volume: 3
Issue: 2
Year: 2010
An Analytical Study on Elastic Flange Wrinkling of Circular Plates in Deep Drawing Process

Author(s): Farzad Moayedian | Mehran Kadkhodayan
Volume: 3
Issue: 2
Year: 2010
Optimization, Controller and Observer Design of a Reconfigurable Mobile Robot Using Genetic Algorithm and Neural Network

Author(s): Davoud Naderi | Soheil Ganjefar | Mohamad Mosadeghzad
Volume: 3
Issue: 2
Year: 2010
Vibration Analysis and Design of Dynamic Absorber in a Vertical Drilling Machine

Author(s): MohamadReza Elhami | Mojtaba Heydari
Volume: 2
Issue: 2
Year: 2009
Analysis and Optimization of Reducing Steady State Time for Heating Systems

Author(s): Farhad Talebi | Sayed Mehdi Sayed Nasrollah | Fatemeh Yousefi
Volume: 2
Issue: 2
Year: 2009
Application of the Inverse Heat Conduction Method in Identifying a Cavity Inside Materials

Author(s): MohamadMehdi Mizanadl | Mohsen Dashti | Mahmoud Khodadad
Volume: 2
Issue: 2
Year: 2009
Two-Phase Heat Transfer and Pressure Drop of Carbon Dioxide in Pipes

Author(s): Zahara Baniamerian | Cirus Aghanajafi
Volume: 2
Issue: 2
Year: 2009
Investigation of Machining Parameters in Wire Electrical Discharge Machining (WEDM) on the Surface Roughness & Cutting Speed of Tungsten Carbide

Author(s): Mehdi Jafarian | GholamHosein Dehghan | Abbas Vafaeisefat
Volume: 2
Issue: 2
Year: 2009
Genetic Algorithm Application in Guided Rockets

Author(s): AliReza Rezaei
Volume: 1
Issue: 2
Year: 2008
Numerical analysis of plate’s vibration behavior with non-linear edge under various boundary conditions

Author(s): Kasra Karbaschi | Hasan Hasanzadeh
Volume: 1
Issue: 2
Year: 2008
Finite Element Simulation of Pulsating Hydroforming of Tube in Box-Shaped Die

Author(s): Mohsen Lohmousavi | K.I Mori | Mohamad Bakhshi | Mahmoud Farzin | Sayed Jamal Hoseinipour
Volume: 1
Issue: 2
Year: 2008
Laminar Mixed convection flow in a shallow two-sided lid-driven rectangular enclosure

Author(s): Arash Karimipour | Behzad Ghasemi
Volume: 1
Issue: 2
Year: 2008
Analytical Solution and Simulation of Flexible Joint in Thrust Vector Control System under Bending

Author(s): Ebrahim Harirbafan | MOhsen Mohseni Shakib | AliAkbar Karimi | Mojtaba Heydari
Volume: 2
Issue: 2
Year: 2009
Dynamic Analysis and Path Control of a Snake like Robot

Author(s): Navid Negahbani | Mostafa Ghayour
Volume: 2
Issue: 2
Year: 2009
Design and Manufacturing Electrochemical Jet Turning Machine and Investigation of its Effective Parameters

Author(s): Amin Mirahamadi | Nader Sharafi
Volume: 2
Issue: 2
Year: 2009
Drag-Reduction characteristics in air flow over the iced surface at Re>104

Author(s): MohamadMehdi Hemmasian | Manouchehr Rad
Volume: 1
Issue: 2
Year: 2008
Extracting Lateral Transfer Function of a Remotely Piloted Helicopter by System Identification Method Using 3-DOF Test Stand

Author(s): Hesamodin EbnodinHamidi | Elyas Nezamoleslami | Faridodin Javadifar
Volume: 4
Issue: 2
Year: 2011
Design of full metal CNG Cylinders for vehicle

Author(s): Mehdi Zohour | Saeed Safar | MohammadHasan Sedghi
Volume: 1
Issue: 2
Year: 2008
Numerical Studies of Laminar Natural Convection in a Square Cavity with Orthogonal Grid Mesh by Finite Volume Method

Author(s): MohammadReza Safaiy | Sayed Reza Saleh | Marjan Goudarzi
Volume: 1
Issue: 2
Year: 2008
Gas Pipeline Corrosion Mapping Using Pulsed Eddy Current Technique

Author(s): M. S. Safizadeh | M. Hasanian
Volume: 5
Issue: 1
Year: 2011
Impeller trimming of an Industrial Centrifugal Viscous Oil Pump

Author(s): Wen Guang Li
Volume: 5
Issue: 1
Year: 2011
Analysis of Elastic-Plastic Behavior of Fiber Metal Laminates Subjected to In-Plane Tensile Loading

Author(s): H. Esfandiar | S. Daneshmand
Volume: 5
Issue: 1
Year: 2011
Design of a New Anti-Lock Braking System for Motorcycles

Author(s): M. Shamsmohamadi | M. Soheili | S. Nasiri | M. J. Rajabirad | M. Torabi
Volume: 5
Issue: 1
Year: 2011
Numerical Simulation of Abrasive Water jet Cutting Process using the SPH and ALE Methods

Author(s): H. Shahverdi | M. Zohoor | S. M. Mousavi
Volume: 5
Issue: 1
Year: 2011
Investigation of Surface Roughness on Aerodynamic Characteristics of Missiles

Author(s): Saeed Daneshmand | Afshin Ahmadi Nadooshan
Volume: 4
Issue: 1
Year: 2010
Investigation into the Importance of Pre-Design Procedure in Vibration Absorbers Installations

Author(s): Rouhollah Hoseini | Hamzeh Salehipour
Volume: 4
Issue: 1
Year: 2010
Study of Metallurgical Properties Effects and Effective Parameters on Fracture Bio-Medical Stainless Steel 316L of Human's Body

Author(s): MohamadHosein Mirghasemi | MohamadReza Salmani
Volume: 4
Issue: 1
Year: 2010
Taylor-Couette Flow Instabilities in Journal Bearings

Author(s): Ahmad Sedaghat | Saeed Jafari | Iman Rouholamin
Volume: 4
Issue: 1
Year: 2010
Control and Guidance of an Underwater Robot via Fuzzy Control Method

Author(s): Mehdi Ghanavati | Afshin Ghanbarzadeh
Volume: 4
Issue: 1
Year: 2010
Prediction of the Subsurface Crack Growth Lifetime in Railroad Wheel of the Iranian Railway System

Author(s): Rahmatollah Ghajar | Javad Alizadeh
Volume: 4
Issue: 1
Year: 2010
Measuring Vibration in the Air Slide Tables of Ultra Precision Machines With the Different Number of Air Pockets

Author(s): Mehrdad Vahdati | Sayed AliReza Rasouli
Volume: 3
Issue: 1
Year: 2009
Numerical Study of Effective Parameters on Cold Rolling of Tri-layers Al/St/Al and Cu/Al/Cu

Author(s): Mohamad Sedighi | Edvin Golestanian | Mahmoud Honarpishe
Volume: 3
Issue: 1
Year: 2009
Free Vibration Analysis of S-FGM-Coated and S-FGM-Undercoated Plates with Classical Boundary Conditions

Author(s): Reza Amininejad | AliReza Mohajerani | AliReza Samsami | Shahab Amininejad
Volume: 3
Issue: 1
Year: 2009
Elasto-plastic Analysis of Thick Walled Tanks Subjected to Internal Pressure

Author(s): Abbas Heydari | MohamadTaghi Kazemi
Volume: 3
Issue: 1
Year: 2009
Mold Less Casting, a New Method for Droplet Based Part Manufacturing

Author(s): Mehrdad Vahdati | Hamed Kalami
Volume: 2
Issue: 1
Year: 2008
Dynamic Design Principles of a Thrust Stand and Methods of Improving Frequency Response

Author(s): Mojtaba Heydari | Amir Alaedin Motallebi | Sadegh Rahmati | Ebrahim Harirbafan
Volume: 2
Issue: 1
Year: 2008
Investigation on Microstructure and Production of Coaxial Cable Foam Insulation using Butane Gas

Author(s): Mehdi Nazri | AmirHosein Behravesh | Payman Shahi
Volume: 2
Issue: 1
Year: 2008
Aerodynamic Parameter Corrections for Surface to Air Missiles Using Tail Flap Vibration Feedback

Author(s): AhmadReza Khougar | Mohsen Azadeh
Volume: 2
Issue: 1
Year: 2008
Assessment of Foolad Mobarakeh ST14 low carbon steel sheet for Automobile Frames

Author(s): Ehsan Mohamadi | Mehdi Taheri | Amir Zomorodian
Volume: 1
Issue: 1
Year: 2007
Design and Weight Optimization of Pin Loaded Composite Plates

Author(s): Mohamad Alipour | Mahmoud Mehrdad Shokrieh | Mahmoud Mehrdad Shokrieh
Volume: 1
Issue: 1
Year: 2007
Mechanical Properties of Basalt/Epoxy Composites

Author(s): Mahmoud Mehrdadshokriyeh | Mehdi Memar
Volume: 2
Issue: 1
Year: 2008
Exergy Analysis for Heat Pipe over a Permeable Vertical thin Cylinder In a Porous Medium

Author(s): Mehdi Asghari | Cirus Aghanajafi
Volume: 2
Issue: 1
Year: 2008
Finite Volume Solutions of 2-D Steady Incompressible Navier-Stokes Equations in Driven Skewed Cavity Flow with Non-Orthogonal Grid Mesh

Author(s): MohammadReza Safaiy | Sayed Reza Saleh | Marjan Goudarzi
Volume: 1
Issue: 1
Year: 2007
Study of Nucleation and Meta stable phenomena’s and Applications

Author(s): Farshid Mardkhri | Cyrus Aghanajafi
Volume: 1
Issue: 1
Year: 2007
Chaotic Motion and its Control for a non-Planar non-Linear Cantilever Beam with Parametric Excitation

Author(s): Javad Marzbanrad | Morteza Seyedi | Hosain Salehi Marzijarani
Volume: 1
Issue: 1
Year: 2007
Multi-Stage Optimum Design For Composite Pressure Vessels

Author(s): Sadegh Rahmati | Ali Khani
Volume: 1
Issue: 1
Year: 2007
Three Dimensional Free Vibration of FGM Circular Plates Using Semi-Analytical Method

Author(s): MohamadMehdi Najafzadeh | Payman Shoghi
Volume: 3
Issue: 1
Year: 2009
Determining Maximum Dynamic Load Carrying Capacity of Cable Robots Between Two End Points of Workspace

Author(s): Moharam Habibnejad | Khaled Najafi | Mehdi Bamdad
Volume: 3
Issue: 1
Year: 2009
Analytical and Simulation of Free-Free Beam Subjected to Concentrated Impact Loadings

Author(s): Reza Mohamadipour | Ebrahim Harirbafan | Mohsen Mohseni
Volume: 2
Issue: 1
Year: 2008
An Investigation of Lid Driven Cavity flow Using Large Eddy Simulation

Author(s): Iman Nourollahi | Behrouz Zafarmand | MohammadReza Safaei | Yashar Maghmoumi
Volume: 2
Issue: 1
Year: 2008
The choice of automatic welding process and technology by using WELD-EXP. software

Author(s): Elyas Haddadi | MohamadReza Shabgard
Volume: 1
Issue: 1
Year: 2007
Atomistic and Continuum Simulations on Tensile Property of a Single Crystal Metal with Nano-holes

Author(s): Mehdi Rezaei Farimani | Hamid Ekhteraei Toussi
Volume: 1
Issue: 1
Year: 2007
Affiliate Program     Free Forms + CRM