Academic Journals Database
Disseminating quality controlled scientific knowledge

ISRN Mechanical Engineering

ISSN: 2090--5122
Publisher: Hindawi Publishing Corporation


ADD TO MY LIST
 
Springback Analysis in Sheet Metal Forming Using Modified Ludwik Stress-Strain Relation

Author(s): Sanjay Kumar Patel | Radha Krishna Lal | J. P. Dwivedi | V. P. Singh
Volume: 2013
Year: 2013
A Critical Review of Computational Methods and Their Application in Industrial Fan Design

Author(s): Alessandro Corsini | Giovanni Delibra | Anthony G. Sheard
Volume: 2013
Year: 2013
Cauchy Six-Dimensional Formalism for Lamb Waves in Multilayered Plates

Author(s): Sergey V. Kuznetsov
Volume: 2013
Year: 2013
Processing and Properties of Nanocrystalline CoCrFeNiCuAlTiXVMo High Entropy Alloys by Mechanical Alloying

Author(s): É. Fazakas | B. Varga | L. K. Varga
Volume: 2013
Year: 2013
Numerical Hydroacoustic Analysis of NACA Foils in Marine Applications and Comparison of Their Acoustic Behavior

Author(s): Parviz Ghadimi | Saman Kermani | Mohammad A. Feizi Chekab
Volume: 2013
Year: 2013
Optimum Conditions for Maximum Power of a Direct Methanol Fuel Cell

Author(s): Mojtaba Tafaoli-Masoule | Arian Bahrami | Danial Mohammadrezaei
Volume: 2013
Year: 2013
Plastic Constitutive Model and Analysis of Flow Stress of 40Cr Quenched and Tempered Steel

Author(s): Wang Xiao-qiang | Zhu Wen-juan | Cui Feng-kui | Li Yu-xi
Volume: 2013
Year: 2013
Multiobjective Optimization Design for Skew and Sweep Parameters of Two-Stage Blades of Axial Fan

Author(s): Wen-hui Yue | Yong-ping Jin | Ze-jun Wen
Volume: 2013
Year: 2013
Numerical Investigation of a First Stage of a Multistage Centrifugal Pump: Impeller, Diffuser with Return Vanes, and Casing

Author(s): Nicolas La Roche-Carrier | Guyh Dituba Ngoma | Walid Ghie
Volume: 2013
Year: 2013
A Critical Review of Stall Control Techniques in Industrial Fans

Author(s): Stefano Bianchi | Alessandro Corsini | Anthony G. Sheard | Cecilia Tortora
Volume: 2013
Year: 2013
Finite Element Multibody Simulation of a Breathing Crack in a Rotor with a Cohesive Zone Model

Author(s): Rugerri Toni Liong | Carsten Proppe
Volume: 2013
Year: 2013
Mobility Method Applied to Calculate the Lubrication Properties of Bearing under Dynamic Loads

Author(s): Tao He | Xiqun Lu | Jingzhi Zhu
Volume: 2013
Year: 2013
Analysis of Transient Dynamic Behaviour of Spherical Cavity in Viscoelastic Soil Medium

Author(s): J. P. Dwivedi | V. P. Singh | Radha Krishna Lal
Volume: 2013
Year: 2013
Heating and Efficiency Comparison of a Fischer-Tropsch (FT) Fuel, JP-8+100, and Blends in a Three-Cup Combustor Sector

Author(s): Anna E. Thomas | Nikita T. Saxena | Dale T. Shouse | Craig Neuroth | Amy Lynch | Charles W. Frayne | Jeffrey S. Stutrud | Edwin Corporan | Terry Hankins | Robert C. Hendricks
Volume: 2012
Year: 2012
Modeling and Compensation for Hysteresis Nonlinearity of a Piezoelectrically Actuated Fast Tool Servo Based on a Novel Linear Model

Author(s): Zhiwei Zhu | Xiaoqin Zhou | Jieqiong Lin | Qiang Liu
Volume: 2012
Year: 2012
Vibration Characteristics of Ring-Stiffened Functionally Graded Circular Cylindrical Shells

Author(s): Muhmmad Nawaz Naeem | Shazia Kanwal | Abdul Ghafar Shah | Shahid Hussain Arshad | Tahir Mahmood
Volume: 2012
Year: 2012
A More Reliable Method for Monitoring the Condition of Three-Phase Induction Motors Based on Their Vibrations

Author(s): R. Shnibha | A. Albarbar | A. Abouhnik | G. Ibrahim
Volume: 2012
Year: 2012
Exergy Assessment of Single Stage Solar Adsorption Refrigeration System Using ANN

Author(s): V. Baiju | C. Muraleedharan
Volume: 2012
Year: 2012
Single Channel Speech Enhancement Techniques in Spectral Domain

Author(s): Arata Kawamura | Weerawut Thanhikam | Youji Iiguni
Volume: 2012
Year: 2012
Sustainable Energy Alternatives Experimentation at SCT

Author(s): Javeed Ahmed Khan | Ramani Ranjan Panda
Volume: 2012
Year: 2012
A Cyclosymmetric Beam Model and a Spring-Supported Annular Plate Model for Automotive Disc Brake Vibration

Author(s): Dennis Boennen | Stephen James Walsh
Volume: 2012
Year: 2012
A Review of Additive Manufacturing

Author(s): Kaufui V. Wong | Aldo Hernandez
Volume: 2012
Year: 2012
Mechanical Characteristics of 6063 Aluminum-Steel Dust Composite

Author(s): S. O. Adeosun | E. I. Akpan | O. I. Sekunowo | W. A. Ayoola | S. A. Balogun
Volume: 2012
Year: 2012
On Vibration and Noise Dissipation in Ship and FPSO Structures with Smart Systems

Author(s): Vincent O. S. Olunloyo | Charles A. Osheku
Volume: 2012
Year: 2012
Experimental Characterisation of the Far-Field Noise in Axial Fans Fitted with Shaped Tip End-Plates

Author(s): S. Bianchi | A. Corsini | A. G. Sheard
Volume: 2012
Year: 2012
Applicability of Scaling Approach for Analysis of Pyrolysis and Gasification of Porous Structures Composed of Solid Fuel Particles

Author(s): Aliaksandr Alevanau | Pawel Donaj | Weihong Yang | Wlodzimierz Blasiak
Volume: 2012
Year: 2012
Influence of Sound Vibration on Diamond-Like Carbon Deposition Rate

Author(s): Syed Md. Ihsanul Karim | Mohammad Asaduzzaman Chowdhury | Md. Maksud Helali
Volume: 2012
Year: 2012
Numerical Study of Fluid Dynamic and Heat Transfer in a Compact Heat Exchanger Using Nanofluids

Author(s): P. Gunnasegaran | N. H. Shuaib | M. F. Abdul Jalal | E. Sandhita
Volume: 2012
Year: 2012
Influence of Heat Treatment and Composition Variations on Microstructure, Hardness, and Wear Resistance of C 18000 Copper Alloy

Author(s): Ramon Osorio-Galicia | Carlos Gomez-Garcia | Miguel Angel Alcantara | Andres Herrera-Vazquez
Volume: 2012
Year: 2012
Low-Head Energy Conversion: A Conceptual Design and Laboratory Investigation of a Microtubular Hydro Propeller

Author(s): Helena M. Ramos | Mariana Simão | Kaloyan N. Kenov
Volume: 2012
Year: 2012
Novel Approach to Rotating Machinery Diagnostics Based on Principal Component and Residual Matrix Analysis

Author(s): A. Abouhnik | Ghalib R. Ibrahim | R. Shnibha | A. Albarbar
Volume: 2012
Year: 2012
Design Optimisation of Lower-Bound Buckling Capacities for FRP-Laminated Cylindrical Shells

Author(s): Hongtao Wang | James G. A. Croll
Volume: 2012
Year: 2012
Characterization and Modelling of Circular Piezoelectric Micro Speakers for Audio Acoustic Actuation

Author(s): J. Mendoza-López | S. Sánchez-Solano | J. L. Huertas-Díaz
Volume: 2012
Year: 2012
Dynamic Analysis of Honeycomb Sandwich Beam with Multiple Debonds

Author(s): B. Saraswathy | R. Ramesh Kumar | Lalu Mangal
Volume: 2012
Year: 2012
Alternate-Fueled Combustor-Sector Performance—Part A: Combustor Performance and Part B: Combustor Emissions

Author(s): D. T. Shouse | C. Neuroth | R. C. Hendricks | A. Lynch | C. W. Frayne | J. S. Stutrud | E. Corporan | Capt. T. Hankins
Volume: 2012
Year: 2012
A Study on the Performance of a Magnetic-Fluid-Based Hydrodynamic Short Journal Bearing

Author(s): N. S. Patel | D. P. Vakharia | G. M. Deheri
Volume: 2012
Year: 2012
Orthotropic Models of Corrugated Sheets in Finite Element Analysis

Author(s): David Wennberg | Per Wennhage | Sebastian Stichel
Volume: 2011
Year: 2011
Unsteady Heat Transfer from an Equilateral Triangular Cylinder in the Unconfined Flow Regime

Author(s): Amit Dhiman | Radhe Shyam
Volume: 2011
Year: 2011
The Investigation of Laser Lap Welding Process on High-Strength Galvanized Steel Sheets

Author(s): Shiquan Zhou | Yi Zhao | Zhenguo Peng | Fangjie Ren
Volume: 2011
Year: 2011
Applications of Permanent Maglev Bearing in Heart Pumps and Turbine Machine

Author(s): Kun-Xi Qian | Teng Jing | Hao Wang
Volume: 2011
Year: 2011
Vibrational Study of Fluid-Filled Functionally Graded Cylindrical Shells Resting on Elastic Foundations

Author(s): Abdul Ghafar Shah | Tahir Mahmood | Muhammad Nawaz Naeem | Shahid Hussain Arshad
Volume: 2011
Year: 2011
High-Speed Study of Drop-Weight Impact Ignition of PBX 9501 Using Infrared Thermography

Author(s): Emily M. Hunt | Steve Malcolm | Matt Jackson
Volume: 2011
Year: 2011
Relationship between Damping Factor and Compressive Residual Stress for Shot-Peened Austenitic Stainless Steel

Author(s): Lakhwinder Singh | R. A. Khan | M. L. Aggarwal
Volume: 2011
Year: 2011
Characteristics of Heat Transfer for Heat Pipe and Its Correlation

Author(s): Aloke Kumar Mozumder | Mohammed Shafiul Hasib Chowdhury | Abul Fahad Akon
Volume: 2011
Year: 2011
Studies on Exhaust Emissions from Copper-Coated Gasohol Run Spark Ignition Engine with Catalytic Converter

Author(s): S. Narasimha Kumar | K. Kishor | M. V. S. Murali Krishna | P. V. K. Murthy
Volume: 2011
Year: 2011
The Investigation of Crack's Parameters on the V-Notch Using Photoelasticity Method

Author(s): M. Saravani | M. Azizi
Volume: 2011
Year: 2011
Crushing Behavior of Thin-Walled Hexagonal Tubes with Partition Plates

Author(s): Dai-Heng Chen | Kenichi Masuda
Volume: 2011
Year: 2011
Photoelastic and Finite Element Stress Analysis of the Gap between the L4 and L5 Vertebrae

Author(s): Sarah Fakher Fakhouri | Suraya Gomes Novais-Shimano | Marcos Massao Shimano | Helton Defino | Cleudmar Amaral Araujo | Antonio Carlos Shimano
Volume: 2011
Year: 2011
Recent Developments and Research Issues in Microultrasonic Machining

Author(s): Vivek Jain | Apurbba Kumar Sharma | Pradeep Kumar
Volume: 2011
Year: 2011
Mechanical Behaviour and Springback Study of an Aluminium Alloy in Warm Forming Conditions

Author(s): H. Laurent | J. Coër | R. Grèze | P. Y. Manach | A. Andrade-Campos | M. C. Oliveira | L. F. Menezes
Volume: 2011
Year: 2011
Thermal Buckling of Piezoelectric Composite Beam

Author(s): S. Yazdani | Y. Kiani | M. Jabbari | M. R. Eslami
Volume: 2011
Year: 2011
Non-Fourier Heat Conduction Analysis with Temperature-Dependent Thermal Conductivity

Author(s): H. Rahideh | P. Malekzadeh | M. R. Golbahar Haghighi
Volume: 2011
Year: 2011
A Type of Two-Photon Microfabrication System and Experimentations

Author(s): Peng Wei | Ning Li | Lishuang Feng
Volume: 2011
Year: 2011
Estimation of Long-Term Stiffness of Storage Aged GFRP Composite Samples Immersed in HCl Acid by TTSP Method

Author(s): Salar Bagherpour | Rouholah Bagheri | Ahmad Saatchi
Volume: 2011
Year: 2011
A Case Study on the Selection of Materials for Eye Lenses

Author(s): Fehim Findik
Volume: 2011
Year: 2011
Design and Development of a New Automated and High-Speed Gas Filling Systems

Author(s): Zheng (Jeremy) Li
Volume: 2011
Year: 2011
Affiliate Program     Free Forms + CRM