Experimental study and advanced CFD simulation of fire safety performance of building external wall insulation system
Author(s): Yan Zhenghua | Zhao Chenggang | Liu Yan | Deng Xiaobing | Ceng Xubin | Liu Songlin | Lan Bin | Nilsson Richard | Jeansson Sebastian
Volume: 9
Year: 2013



Contribution to the study by numerical simulation of a fire plume coming out through a window on façade “Application to the comprehension of the wind influence on an eventually stack effect”
Author(s): Martinez R. Bernardo
Volume: 9
Year: 2013



Comparative assessment of CFD Tools and the Eurocode Methodology in describing Externally Venting Flames
Author(s): Asimakopoulou Eleni K. | Kolaitis Dionysios I. | Founti Maria A.
Volume: 9
Year: 2013



Computer-simulation study on fire behaviour in the ventilated cavity of ventilated façade systems
Author(s): Giraldo María P. | Lacasta Ana | Avellaneda Jaume | Burgos Camila
Volume: 9
Year: 2013



Effects of side walls on facade flame entrainment and flame height from opening in compartment fires
Author(s): Hu L.H. | Lu K.H. | Tang F. | Delichatsios M. | He L.H.
Volume: 9
Year: 2013



Semi-natural test methods to evaluate fire safety of wall claddings
Author(s): Smolka Miroslav | Messerschmidt Birgitte | Scott John | Madec Bruce le
Volume: 9
Year: 2013



Performance of different fire retardant products applied on Norway spruce tested in a Cone calorimeter
Author(s): Kögl Josef | Hartmann Paul | Beikircher Wilfried
Volume: 9
Year: 2013



Mechanism of fire spread on facades and the new Technical Report of EOTA “Large-scale fire performance testing of external wall cladding systems”
Author(s): Kotthoff Ingolf | Riemesch-Speer Jan
Volume: 9
Year: 2013



Fire resistance tests of large glazed aluminium curtain wall test specimens – results comparison
Author(s): Sȩdłak Bartłomiej | Kinowski Jacek | Borowy Andrzej
Volume: 9
Year: 2013



Fire safety of etics with EPS material properties and relevance for fire safety during transport, construction and under end use conditions in external thermal insulation component systems
Author(s): Antonatus Edith
Volume: 9
Year: 2013



Fire Safety in timber-based element façade-systems
Author(s): Loebus Stefan | Werther Norman | Winter Stefan
Volume: 9
Year: 2013



Calculation of radiant heat flux from compartment fires in various ventilation conditions
Author(s): Glennie Devin | Hadjisophocleous George
Volume: 9
Year: 2013



Fire hazards of exterior wall assemblies containing combustible components
Author(s): White Nathan | Delichatsios Michael | Ahrens Marty | Kimball Amanda
Volume: 9
Year: 2013



Experimental study of the fire performance of wooden facades
Author(s): Teibinger Martin | Matzinger Irmgard | Schober Peter
Volume: 9
Year: 2013



Façade fire tests – measurements and modeling
Author(s): Anderson Johan | Jansson Robert
Volume: 9
Year: 2013



Fire spread modes and performance of fire stops in vented façade constructions – overview and standardization of test methods
Author(s): Jensen Geir
Volume: 9
Year: 2013



Fire resistance without fire resistant glazing
Author(s): Koudijs Johan | Csoke Csilla
Volume: 9
Year: 2013



The Italian National Guidelines for the fire safety of facades
Author(s): Lamberto Mazziotti | Cancelliere Piergiacomo
Volume: 9
Year: 2013



Comparative analysis of façade regulations in the Nordic countries
Author(s): Strömgren Michael | Albrektsson Joakim | Johansson Anders | Almgren Erik
Volume: 9
Year: 2013



A risk-informed appraisal of prescriptive building separation regulations in Switzerland
Author(s): Studhalter Jakob
Volume: 9
Year: 2013



A new approach to the Danish guidelines for fire protection of combustible insulation
Author(s): Dragsted Anders | Bach Vestergaard Anders
Volume: 9
Year: 2013



Artificial and natural weathering of fire proofed wood cladding
Author(s): Belloncle Christophe | Irle Mark | Aurel Jean-Baptiste
Volume: 9
Year: 2013



Fire tests of PUR insulation with different fire protecting claddings
Author(s): Dragsted Anders | Bach Vestergaard Anders
Volume: 9
Year: 2013



Gypsum plasterboards enhanced with phase change materials: A fire safety assessment using experimental and computational techniques
Author(s): Kolaitis Dionysios I. | Asimakopoulou Eleni K. | Founti Maria A.
Volume: 9
Year: 2013



Fire performance of multi-storey wooden facades
Author(s): Östman Birgit A.-L. | Tsantaridis Lazaros D.
Volume: 9
Year: 2013



Study on prevention of spread of vertical fire along finishing materials for external wall of high-rise buildings
Author(s): Yoo Yong Ho | Chae Seung Un | Kim Heung Youl | Kim Woon Hyung
Volume: 9
Year: 2013



EPS insulated façade fires from a fire and rescue perspective
Author(s): Kumm M. | Söderström J. | Lönnermark A.
Volume: 9
Year: 2013



Fire resistance of “high-tech plastics”
Author(s): Koudijs Johan | Wild Jhon de | Smit Jack
Volume: 9
Year: 2013



Fire hazard analysis of façade systems in reconstructing buildings
Author(s): Nikolaevich Giletich Anatoly | Arcad'yevich Kosachev Andrey | Andreevich Kosachev Andrey
Volume: 9
Year: 2013



Experimental study of fire barriers preventing vertical fire spread in ETISs
Author(s): Xin Huang | Zhaopeng Ni | Lei Peng | Ping Zhuo
Volume: 9
Year: 2013



Fire safety of EPS insulated facades in residential multi-storey buildings
Author(s): Mikkola Esko | Hakkarainen Tuula | Matala Anna
Volume: 9
Year: 2013



Experimental study on fire propagation over combustible exterior facades in Japan
Author(s): Nishio Yuhei | Yoshioka Hideki | Noguchi Takafumi | Ando Tatsuo | Tamura Masamichi
Volume: 9
Year: 2013



Experimental and numerical study of fire spread upon double-skin glass facades
Author(s): Peng Lei | Ni Zhaopeng | Huang Xin
Volume: 9
Year: 2013



Experimental investigation of flame impingement on vertical and inclined glazing facades
Author(s): Quinn Michael | Nadjai Ali | Ali Faris | Bakirtzis Dimitri
Volume: 9
Year: 2013



Façade fires in Swedish school buildings
Author(s): Johansson Nils | Hees Patrick van | McNamee Margaret Simonson | Strömgren Michael | Jansson Robert
Volume: 9
Year: 2013



Controlled adsorption and release onto calcium phosphates materials and drug delivery applications
Author(s): Barroug A. | Noukrati H. | Errassifi F. | Sarda S. | Cazalbou S. | Combes C. | Rey C. | Glimcher M.J.
Volume: 5
Year: 2013



Soudage hybride Laser-MAG d'un acier Hardox® Hybrid Laser Arc Welding of a Hardox® steel
Author(s): Chaussé Fabrice | Bertrand Emmanuel | Paillard Pascal | Dubourg Laurent | Lemaitre David | Carin Muriel
Volume: 7
Year: 2013



Soudage homogène MIG de l'alliage d'aluminium 6061 MIG homogeneous welding of 6061 aluminium alloy
Author(s): Benoit Alexandre | Paillard Pascal | Baudin Thierry | Mottin Jean-Baptiste
Volume: 7
Year: 2013



Friction Melt Bonding: An innovative process for aluminium-steel lap joints
Author(s): Simar Aude | Van Der Rest Camille | Jacques Pascal J.
Volume: 7
Year: 2013



Etude métallurgique du soudage par friction malaxage sur un acier à haute limite élastique destiné à la construction navale : le 80 HLES Metallurgical study of friction stir welding on a steel high yield for shipbuilding: The 80 HLES
Author(s): Allart Marion | Rückert Guillaume | Paillard Pascal
Volume: 7
Year: 2013



New generation of Sour Service Drill Pipe allows addressing highly sour field challenges
Author(s): Thomazic A. | Rodrigues R. | Thebault F. | Mauries S. | Flores V. | Lambet E.
Volume: 7
Year: 2013



Development of specific materials for the high power electronic components in electric vehicles
Author(s): Kaabi Abderrahmen | Bienvenu Yves | Pierre Bertrand | Prevond Laurent
Volume: 7
Year: 2013



Sources d'hétérogénéité d'un assemblage par soudage par diffusion homogène de tôles en acier austénitique inoxydable Heterogeneity sources during homogeneous HIP-bonding of austenitic stainless steel
Author(s): Bouquet Nicolas | Rigal Emmanuel | Chomette Sebastien | Heintz Olivier | Bernard Frédéric
Volume: 7
Year: 2013



Modélisation du procédé de soudage hybride Arc / Laser par une approche level set application aux toles d'aciers de fortes épaisseurs A level-set approach for the modelling of hybrid arc/laser welding process application for high thickness steel sheets joining
Author(s): Desmaison Olivier | Bellet Michel | Guillemot Gildas
Volume: 7
Year: 2013



Développement d'une approche couplée Automates Cellulaires – Eléments Finis pour la modélisation du développement des structures de grains en soudage TIG A coupled Cellular Automaton – Finite Element approach for the modelling of grain structure development in TIG welding
Author(s): Chen Shijia | Guillemot Gildas | Gandin Charles-André
Volume: 7
Year: 2013



Microstructures formation and phase transformations around the interface of welds between dissimilar steels
Author(s): Mas Fanny | Tassin Catherine | Kozeschnik Ernst | Roch François | Todeschini Patrick | Brechet Yves
Volume: 7
Year: 2013



Matériaux de friction : formulation simplifiée pour la compréhension du rôle des constituants et de l'impact du procédé d'élaboration
Author(s): Cristol Anne-Lise | Baklouti Mouna | Hentati Nesrine | Desplanques Yannick | Elleuch Riadh | Najjar Denis | Kchaou Mohamed
Volume: 7
Year: 2013



Friction and wear studies on the temperature dependence of brake-pad materials containing brass
Author(s): Eddoumy Fatima | Kasem Haytam | Dufrenoy Philippe | Celis Jean-Pierre | Desplanques Yannick
Volume: 7
Year: 2013



Des voies d'évolution pour les matériaux utilisés dans le matériel roulant SNCF
Author(s): Lallet Patrick | Cocheteux Francis
Volume: 7
Year: 2013



Influence de la nuance d'acier des roues ferroviaires en Fatigue de Contact de Roulement
Author(s): Langueh Amavi | Brunel Jean-François | Charkaluk Eric | Dufrenoy Philippe | Demilly François
Volume: 7
Year: 2013



An experimental study of the effect of surface morphology on squeal occurrence
Author(s): Asano Mayu | Brunel Jean-Franç ois | Mège-Revil Alexandre | Chen Huawei | Liu Xiandong | Ichchou Mohamed | Desplanques Yannick
Volume: 7
Year: 2013



Compréhension de la stabilité thermique des alliages d'aluminium Al-Cu-Mg Understanding of the thermal stability of Al-Cu-Mg aluminum alloys
Author(s): Pouget Gaëlle | Sigli Christophe
Volume: 7
Year: 2013



Fragilisation par le zinc liquide des aciers haute résistance pour l'automobile Liquid zinc embrittlement of high strength automotive steels
Author(s): Frappier Renaud | Paillard Pascal | Gall René Le | Dupuy Thomas | Fabregue Damien | Kleber Xavier
Volume: 7
Year: 2013



Relation microstructure-propriétés mécaniques d'un acier martensitique inoxydable
Author(s): Badinier Guillaume | Mithieux Jean-Denis | Herbelin Jean-Marc
Volume: 7
Year: 2013



Influence des paramètres matériaux sur le comportement des élastomères Influence of the material parameters on the mechanical properties of rubbers
Author(s): Merckel Yannick | Brieu Mathias | Diani Julie
Volume: 7
Year: 2013



The effect of grain size on the mechanical response of a metastable austenitic stainless steel
Author(s): Sinclair C.W. | Marechal D. | Mithieux J.D.
Volume: 7
Year: 2013



Mechanical properties and corrosion resistance of some titanium alloys in marine environment
Author(s): Dupuis Jennifer | Chenon M. | Faure S. | Razan F. | Gloriant T.
Volume: 7
Year: 2013



Alliages intermétalliques du magnésium, anodes pour MAFC ? Magnesium intermetallic alloys, anodes for MAFC?
Author(s): Montagné Pierre | Tillard Monique
Volume: 7
Year: 2013



On the influence of microstructural gradients in the fatigue lifetime estimation of a railway axle
Author(s): Baudoin Pierre | Magnier Vincent | Bartali Ahmed El | Witz Jean-François | Dufrenoy Philippe | Charkaluk Eric | Demilly François
Volume: 7
Year: 2013



Modification de la morphologie du graphite pour l'amélioration de la durée de vie des disques de frein poids lourd Graphite morphology modification for improvement of truck brake disc lifespan
Author(s): Collignon M. | Cristol A.-L. | Desplanques Y. | Dufrénoy P. | Regheere G. | Balloy D.
Volume: 7
Year: 2013



Local plastic strain inhomogeneity in a ZEK100 Mg alloy
Author(s): Sinclair C.W. | Martin G.
Volume: 7
Year: 2013



Current and future aluminium strategies for sustainable automobile transport systems
Author(s): Lequeu Philippe
Volume: 7
Year: 2013



Effect of the forming process on the microstructure of aluminium parts for collective transports
Author(s): Diawara B. | Bouquerel J. | Vogt J.-B. | Najjar D. | Dubar M.
Volume: 7
Year: 2013



Characterization of Al/MWCNTs composites prepared by powder metallurgy routes
Author(s): Housaer F. | Legris A. | Béclin F. | Touzin M. | Tingaud D. | Ji G. | Shabadi R.
Volume: 7
Year: 2013



« Retour vers le futur » de l'inox dans l'automobile “Back to the future” of stainless steel in the automotive
Author(s): Santacreu P.O. | Miraval C. | Faivre L. | Girardon P. | Acher A. | Herbelin J.M.
Volume: 7
Year: 2013



CISIT le Campus Interdisciplinaire sur les Transports et la Mobilité Durable : focus sur les nouveaux défis pour des véhicules plus légers, fiables et sécuritaires CISIT the Interdisciplinary Cluster on Sustainable Transports and Mobility: Focus on new challenges for clean, safe and lightweight vehicles
Author(s): Markiewicz Eric
Volume: 7
Year: 2013



What is the connection between metallurgy and environmental issues? Could a new discipline emerge from this confrontation?
Author(s): Birat Jean-Pierre
Volume: 7
Year: 2013



Caractérisation multi-échelle d'alliages nickel – titane utilisés pour des limes endodontiques
Author(s): Serres N. | Bahlouli N. | Hemmerlé J. | Wagner-Kocher C. | de Magalhaes Correia P. | Fabre R. | Jordan L. | Haikel Y. | Feugeas F.
Volume: 7
Year: 2013



Material influence on biocontamination level and adhering cell physiology Influence des matériaux sur le niveau de biocontamination et la physiologie des cellules adhérentes
Author(s): Allion Audrey | Herry Jean-Marie | Bellon-Fontaine Marie-Nöelle
Volume: 7
Year: 2013



Elaboration et caractérisation d'alliages de type Ti-Nb-X (X = O, N) pour des applications biomédicales Synthesis and characterisation of Ti-Nb-X (X = O, N) alloys for biomedical application
Author(s): Ramarolahy A. | Castany P. | Laheurte P. | Prima F. | Curfs C. | Gloriant T.
Volume: 7
Year: 2013



Procédé de nitruration d'un alliage de titane superélastique pour des applications biomédicales Nitriding process of a superelastic titanium alloy for biomedical applications
Author(s): Bedouin Yvan | Gordin Doina-Margareta | Gloriant Thierry
Volume: 7
Year: 2013



Prévision de l'épaisseur du film passif d'un acier inoxydable 316L soumis au fretting corrosion grâce au Point Defect Model, PDM Predicting the steady state thickness of passive films with the Point Defect Model in fretting corrosion experiments
Author(s): Geringer Jean
Volume: 7
Year: 2013



Etude de la récupération du zinc des résidus de lixiviation Recuperation study of zinc from leaching residues
Author(s): Benarioua Younes
Volume: 7
Year: 2013



Récupération du platine contenu dans les piles à combustible basse température par voie hydrométallurgique Platinum Recovery from used PEMFC by hydrometallurgy
Author(s): Vincent Denis | Billy Emmanuel | Laucournet Richard
Volume: 7
Year: 2013



Valorisation par voie hydrométallurgique de Matières Premières Secondaires Valorization of Secondary Raw Materials by hydrometallurgical way
Author(s): Meux Eric | Leclerc N. | Hazotte C. | Schneider M. | Lapicque F.
Volume: 7
Year: 2013



Influence de la présence de contaminants lors du recyclage des thermoplastiques Influence of contaminants during the recycling of thermoplastics
Author(s): Casetta Mathilde | Duquesne Sophie
Volume: 7
Year: 2013



Recycling and refining of copper for electrical application
Author(s): Dablement Sébastien
Volume: 7
Year: 2013



Usage de la refusion par bombardement électronique pour la purification et le recyclage des alliages Application of the electron beam remelting for the purification and the recycling of alloys
Author(s): Bellot Jean-Pierre | Martens Jonathan | Jourdan Julien | Jardy Alain
Volume: 7
Year: 2013



Influence de la rugosité et de la texturation de surface sur la tenue des assemblages collés
Author(s): De Souza M. | Valiorgue F. | Bertrand Ph. | Henry N. | Jeandrau J.P.
Volume: 7
Year: 2013



Systèmes multimatériaux – Assemblage par collage Multimaterial systems – Adhesive bonding
Author(s): Zuanna C. Dalla
Volume: 7
Year: 2013



Kinetics studies of the polymerization and analysis of the mechanical behavior of the adhesive hysol EA-9321
Author(s): Devaux O. | Cognard J.Y. | Creac'hcadec R. | Carrere N. | Lavelle F.
Volume: 7
Year: 2013



Modélisation et caractérisation des joints collés à hautes vitesses de déformation Modeling and characterization of bonded joints at high strain rates
Author(s): Bourel B. | Haugou G. | Lauro F. | Deltombe R. | Lesueur D. | Bennani B.
Volume: 7
Year: 2013



Caractérisation expérimentale du comportement mécanique d'assemblage haute température pour l'électronique de puissance Experimental characterization of the mechanical behavior of high-temperature assembly for power electronics
Author(s): Baazaoui Ahlem | Alexis Joel | Dalverny Olivier | Karama Moussa
Volume: 7
Year: 2013



Soudage par explosion thermique sous charge de cermets poreux à base de TiC-Ni sur substrat en acier-comportement tribologique Welding of porous TiC–Ni based cermets on substrate steel by thermal explosion under load-tribological behaviour
Author(s): Lemboub Samia | Boudebane Said | Atoui L'hadi
Volume: 7
Year: 2013



Etude expérimentale du soudage par laser YAG de l'alliage base nickel Hastelloy X Experimental study of YAG laser welding of nickel base alloy Hastelloy X
Author(s): Graneix Jérémie | Beguin Jean-Denis | Pardeilhan François | Masri Talal | Alexis Joël
Volume: 7
Year: 2013



Revêtements d'hydroxyapatite réalisés par projection plasma : vers de nouvelles fonctionnalités Plasma Sprayed Hydroxyapatite Coatings: Towards new functions
Author(s): Bertrand Ghislaine | Grossin David | Rey Christian
Volume: 7
Year: 2013



Processing and properties of calcium phosphates bioceramics by hot isostatic pressing
Author(s): Boilet Laurent | Lardot Véronique | Tricoteaux Arnaud | Leriche Anne | Cambier Francis | Descamps Michel
Volume: 7
Year: 2013



Synthesis and fabrication of porous calcium phosphate ceramics for antibacterial bone substitutes
Author(s): Hornez J.C. | Bouchart F. | Meurice E. | Descamps M. | Leriche A.
Volume: 7
Year: 2013



Sol-gel synthesis of 45S5 bioglass – Prosthetic coating by electrophoretic deposition
Author(s): Faure Joel | Drevet Richard | Potiron Sylvain | Sockalingum Ganesh | Untereiner Valérie | Manfait Michel | Benhayoune Hicham
Volume: 7
Year: 2013



Frittage micro-ondes en cavité monomode de biocéramiques Microwaves sintering of bioceramics in a single mode cavity
Author(s): Savary Etienne | Thuault Anthony | Hornez Jean-Christophe | Descamps Michel | Marinel Sylvain | Leriche Anne
Volume: 7
Year: 2013



Impact of UHMWPE texture on friction and wear resistance of hip prosthesis
Author(s): Eddoumy Fatima | Addiego Frédéric | Célis Jean-Pierre | Muller René | Ruch David
Volume: 7
Year: 2013



Biomechanics of pelvic system: Towards a definition of the required mechanical properties of implants
Author(s): Brieu M. | Cosson M. | Lecomte-Grosbras P. | Rubod C. | Witz J.-F.
Volume: 7
Year: 2013



Simultaneous antibacterial and anticoagulant properties of polypropylene non-woven textiles Elaboration d'un textile polypropylène non-tissé présentant simultanément des propriétés antibactériennes et anticoagulantes
Author(s): Jimenez Maude | Degoutin Stéphanie | Bellayer Séverine | Chai Feng | Blanchemain Nicolas | Neut Christel
Volume: 7
Year: 2013



Composites organiques-inorganiques pour la substitution et la réparation osseuse : concepts, premiers résultats et potentialités Organic-inorganic composites for bone substitute and bone repair applications: concepts, first results and potentialities
Author(s): Peroglio Marianna | Ginsac Nathalie | Chevalier Jérôme | Gremillard Laurent | Meille Sylvain | Chazeau Laurent | Gauthier Catherine | Chenal Jean-Marc
Volume: 7
Year: 2013



Controlled release of encapsulated methylene blue in a multilayered textile coating
Author(s): Martin Adeline | Tabary Nicolas | Leclercq Laurent | Junthip Jatupol | Aubert-Viard François | Chai Feng | Blanchemain Nicolas | Martel Bernard
Volume: 7
Year: 2013



Elaboration de plateformes biomimétiques à base de dopamine pour la fonctionnalisation du titane Elaboration of biomimetic dopamine platforms for the functionalization of titanium surfaces
Author(s): Laure William | Zobrist Cédric | Lyskawa Joël | Fournier David | Woisel Patrice
Volume: 7
Year: 2013



Elaboration de biocéramiques phosphocalciques Processing of calcium phosphate bioceramics
Author(s): Champion Eric | Damia Chantal | Viana Marylène | Beaubrun-Giry K. | Drouet C. | Grossin D.
Volume: 7
Year: 2013



Réparation ou régénération du squelette, avec des biomatériaux, comment, pourquoi ?
Author(s): Weiss Pierre
Volume: 7
Year: 2013



Synthesis and post-treatments of biomimetic apatites: How working conditions may configure final physico-chemical features
Author(s): Drouet Christophe | Vandecandelaere Nicolas | Rey Christian
Volume: 7
Year: 2013



Mécanisme multiphysique de dégradation des zircones orthopédiques : couplage entre vieillissement hydrothermal et frottement en simulateur de hanche Multi-physics degradation mechanisms of orthoaedic zirconia: Coupling hydrothermal ageing and wear on a hip simulator
Author(s): Gremillard Laurent | Martin Laura | Chevalier Jérôme | Aurelle Jean-Luc | Espinouse Julia
Volume: 7
Year: 2013



Erratum to: Study of the surface size defects in the case of a soda lime glass eroded by sandblasting
Author(s): Faci A. | Kolli M. | Bouaouadja N. | Bousbaa C.
Volume: 5
Year: 2013



Erratum to: Improvement of the surface state of a sandblasted glass by deposing a thin layer of SiO2 using sol-gel technique
Author(s): Marouani A. | Bouaouadja N. | Duran A. | Castro Y.
Volume: 5
Year: 2013



Contributions of Tzero™ technology to temperature modulated Differential scanning calorimetry
Author(s): Loubens J. | Hoppenot F.
Volume: 3
Year: 2013



Flow calorimetry: a technique for caracterisation of liquid-liquid and liquid-gas systems
Author(s): Simond M.R. | Ballerat-Busserolles K. | Coulier Y. | Coxam J-Y.
Volume: 3
Year: 2013



FTIR spectroscopy and X-ray powder diffraction characterization of microcrystalline cellulose obtained from alfa fibers
Author(s): Trache D. | Khimeche K. | Donnot A. | Benelmir R.
Volume: 3
Year: 2013



Growth and characterization of new borate-based crystal fibers by the micro-pulling down technique
Author(s): Cochez M. | Assi F. | Kozhaya N. | Ferriol M. | Aillerie M. | Maxwell G.
Volume: 3
Year: 2013



Measurement of vapor-liquid equilibria for diethylamine + methanol system represented double azeotropy on elevated pressure
Author(s): Hiaki T. | Saida K. | Ishihara T. | Sato T. | Matsumoto M. | Okada M.
Volume: 3
Year: 2013



Experimental determination of the critical locus of binary systems containing CO2 and an ethyl ester
Author(s): Juntarachat N. | Coniglio L. | Privat R. | Jaubert J.-N.
Volume: 3
Year: 2013



Temperature-resolved second harmonic generation: a tool designed to study solid-solid transition
Author(s): Clevers S. | Simon F. | Dupray V. | Coquerel G.
Volume: 3
Year: 2013



The thermodynamics of alcohols-hydrocarbons mixtures
Author(s): Privat R. | Jauber J.-N. | Molière M.
Volume: 3
Year: 2013



Prevention of the scaling in water distribution systems
Author(s): Ben Amor M. | Tlili M.
Volume: 3
Year: 2013



Self-assembly of organic-inorganic hybrid nanolayers: effect of endgroup polarity on nanostructures
Author(s): Dhotel A. | Xu Z. | Delbreilh L. | Youssef B. | Saiter J.M. | Tan J.M.
Volume: 3
Year: 2013



Thermodynamic investigation of the Al2O3-M2O (M=K,Na) systems
Author(s): Zhang L. | Guhl S.
Volume: 3
Year: 2013



Modeling phase diagrams of systems containing ionic liquids used in different applications
Author(s): Chen Y.S. | Mutelet F. | Jaubert J-N.
Volume: 3
Year: 2013



On the solid-liquid equilibrium behavior of fatty acids with ethanolamines
Author(s): Maximo G.J. | Coutinho J.A.P. | Costa M.C. | Meirelles A.J.A.
Volume: 3
Year: 2013



The effective diffusion coefficient of boron in the Fe2B layers formed on the iron substrate
Author(s): Keddam M. | Bouarour B. | Abdellah Z. Nait | Chegroune R.
Volume: 3
Year: 2013



Second harmonic generation: applications in phase diagram investigations
Author(s): Simon F. | Mahieux J. | Clevers S. | Couvrat N. | Dupray V. | Coquerel G.
Volume: 3
Year: 2013



Thermal evolution of solid-liquid equilibria in the quaternary system: NaBH4–NaBO2–NaOH–H2O
Author(s): Vilarinho-Franco T. | Teyssier A. | Tenu T. | Delmas J. | Capron P. | Counioux J.J. | Goutaudier C.
Volume: 3
Year: 2013



On the Bi2O3-Al2O3-PbO system
Author(s): Oudich F. | David N. | Fiorani J.M. | Vilasi M.
Volume: 3
Year: 2013



Thermodynamic assessments of the Fe-Y and Ni-Sc systems
Author(s): Kardellass S. | Servant C. | Selhaoui N. | Iddaoudi A. | Ait Amari M. | Bouirden L.
Volume: 3
Year: 2013



Miscanthus ash melting: comparison of thermodynamic calculation and experiments in thermal processes
Author(s): Kaknics J. | Michel R. | Bouchetou M-L. | Poirier J.
Volume: 3
Year: 2013



Thermodynamic and structural studies of the solid deposit formation in paraffinic petroleum cuts
Author(s): Dirand M. | Petitjean D. | Bouroukba M.
Volume: 3
Year: 2013



Multi-phases problematic in the oil & gas industry: solid phases combined to fluid phases
Author(s): Duchet-Suchaux P.
Volume: 3
Year: 2013



Characterization and optimization of a novel protein refolding methodology
Author(s): Roussel G. | Rouse S.L. | Sansom M.S.P. | Perpète E.A. | Michaux C.
Volume: 3
Year: 2013



Hydration characteristics of lithium, zinc, potassium and sodium salts
Author(s): Lefebvre E. | Bennici S. | Gagnière E. | Mangin D. | Auroux A.
Volume: 3
Year: 2013



Modeling wax formation with predictive UNIQUAC: from petroleum and fuels to biofuels
Author(s): Coutinho J.A.P.
Volume: 3
Year: 2013



Heat transfer enhancement by spinodal decomposition in micro heat exchangers
Author(s): Farisè S. | Poesio P. | Beretta G.P.
Volume: 3
Year: 2013



Relationship of thermodynamic properties between solid and liquid states in AIII-BV systems
Author(s): Ilinykh N.I. | Vassiliev V.P.
Volume: 3
Year: 2013



Prediction of the permeability of polymers to gases and condensable vapors
Author(s): Kréa M. | Hasnaoui H. | Terkmane N. | Gheraba L.
Volume: 3
Year: 2013



Measurement of local composition of organic materials within porous inorganic media using two-dimensional acoustic mapping
Author(s): Cassiede M. | Shaw J.M.
Volume: 3
Year: 2013



Optimisation of the preparation of a phosphomagnesium cement based on struvite and K-struvite
Author(s): Hammi H. | Mnif A.
Volume: 3
Year: 2013



Simultaneous thermal analyses under high pressure and high temperature: a precious tool for investigation of hydrogen storage and biomass gasification
Author(s): Marx H.-W. | Rӓdel H.
Volume: 3
Year: 2013



Stable, metastable and unstable phases of halogen methane derivatives
Author(s): Tamarit J.Ll.
Volume: 3
Year: 2013



Experimental determination and prediction of liquid-solid equilibria for binary (methyl palimitate + naphthalene) mixture
Author(s): Benziane M. | Khimeche K. | Dahmani A. | Trache D.
Volume: 3
Year: 2013



Thermal analysis of microcrystalline cellulose prepared from esparto grass
Author(s): Trache D. | Khimeche K. | Donnot A. | Benelmir R.
Volume: 3
Year: 2013



Experimental determination and prediction of solid-liquid phase equilibria for binary (N-(2-acetoxyethyl)-p-nitroaniline (1) + N-ethyle-4-nitroaniline (2)) mixture
Author(s): Trache D. | Khimeche K. | Benelmir R.
Volume: 3
Year: 2013



Extraction of copper and zinc by liquid-membrane-gel
Author(s): Taoualit N. | Abidet I. | Hadj-Boussaad D.E.
Volume: 3
Year: 2013



The conformational polymorphism of 1,1,2,2-tetrachloroehtane (C2H2Cl4)
Author(s): Negrier Ph. | Barrio M. | Zuriaga M. | Pérez S.C. | Tamarit J.Ll. | Mondieig D.
Volume: 3
Year: 2013



Thermodynamic description of the Ga-Yb binary system
Author(s): Idbenali M. | Servant C.
Volume: 3
Year: 2013



Global thermodynamic behaviour of supercritical fluids: example of methane and ethane
Author(s): Rizi A. | Ladjama S. | Abbaci A.
Volume: 3
Year: 2013



Thermodynamics conditions for Guerbet ethanol reaction
Author(s): Olcese R. | Bettahar M.M.
Volume: 3
Year: 2013



Determination of the surface tension of mixtures with molecular simulation
Author(s): Neyt J.C. | Wender A. | Lachet V. | Malfreyt P.
Volume: 3
Year: 2013



Determination of experimental excess molar properties for mixtures of carboxylic acids
Author(s): Attia A. | Mutelet F. | Solimando R. | Jeday M. | Tretjak S.
Volume: 3
Year: 2013



Modeling of the solubility of Naproxen and Trimethoprim in different solvents at different temperature
Author(s): Moudjari Y. | Louaer W. | Meniai A-H.
Volume: 3
Year: 2013



Enhanced production of unstable polymorph by antisolvent crystallization supplying minute-bubbles
Author(s): Matsumoto M. | Wada Y. | Onoe K.
Volume: 3
Year: 2013



Thermodynamic assessment of the Al-Re system
Author(s): Najih H. | Mahdouk K. | Iddaoudi A. | Selhaoui N.
Volume: 3
Year: 2013



A thermodynamic analysis of the Ge-Ru system
Author(s): Mahdouk K. | Iddaoudi A. | Ait Amar M. | Selhaoui N.
Volume: 3
Year: 2013



Biomass gasification in bubbling fluidized bed: behaviour of inorganics at high temperature and their interaction with bed material
Author(s): Kaknics J. | Michel R. | Bouchetou M-L. | Poirier J.
Volume: 3
Year: 2013



Thermodynamic optimization of the Ho–Sn system
Author(s): Iddaoudi A. | Selhaoui N. | Kardellass S. | Ait Amar M. | Karioui R. | Mahdouk K. | Najih H. | Bouirden L.
Volume: 3
Year: 2013



Physical and chemical stability of triethylenetetramine dihydrochloride, an API against Wilson’s disease
Author(s): Henriet T. | Rotival R. | Ghaddar C. | Choquet M. | Cartigny Y. | Rietveld I.B. | Do B.
Volume: 3
Year: 2013



The pretreatment of miscanthus using ionic liquids; a way for biofuel production
Author(s): Hassan El-S.R.E. | Mutelet F. | Moïse J.-C.
Volume: 3
Year: 2013



Thermodynamic excess properties of 3,5- and 2,6-dimethylpyridine with cyclohexane measurement and prediction
Author(s): Ben-makhlouf-Hakem H. | Ait-kaci A. | Jose J.
Volume: 3
Year: 2013



Determination of acid dissociation constants of some hydroxy schiff bases by pH-metric titration. application of the Hammett equation
Author(s): Hadjeb R. | Bara A. | Barkat D.
Volume: 3
Year: 2013



Ternary critical point determination of experimental demixion curve: calculation method, relevance and limits
Author(s): Goutaudier C. | Bonnet F. | Tenu R. | Baudouin O. | Counioux J.J.
Volume: 3
Year: 2013



New process of preparation of pyrazolidine: synthesis, extraction and flow-sheet
Author(s): El Hajj A. | Bougrine A.J. | Delalu A.J.
Volume: 3
Year: 2013



Study of the chemical inhibition of the scaling of large Agadir water
Author(s): Driouiche A. | Hadfi A. | Eddaoudi H. | El Hadek M.
Volume: 3
Year: 2013



Prediction of thermal properties of ternary systems of 2,2ʹoxybis[propane]+ benzene, toluene, cyclohexane or n-heptane
Author(s): Didaoui S. | Ait-Kaci A.
Volume: 3
Year: 2013



SLE for the carbon dioxide +trans-1,3,3,3-tetrafluoropropene
Author(s): Di Nicola G. | Cacciatore I. | Pierantozzi M. | Arteconi A.
Volume: 3
Year: 2013



Vapor-liquid equilibrium data concerning refrigerant systems (R3110+R365mfc)
Author(s): Madani H. | Valtz A. | Coquelet C.
Volume: 3
Year: 2013



Experimental determination of liquid-liquid equilibrium data and their representation using the UNIQUAC and NRTL equations
Author(s): Ghizellaoui S. | Coquelet C.
Volume: 3
Year: 2013



Purification of artemisinin excerpt from Artemisia annua L
Author(s): Chemat-Djenni Z. | Sakhri A.
Volume: 3
Year: 2013



Estimation of adhesion energy of alumina scales on FeCrAl alloys: effect of the TiO2 sol-gel coating
Author(s): Chegroune R. | Keddam M.
Volume: 3
Year: 2013



Measurement of carbon dioxide solubility in aqueous solution of sodium hydroxide from 293 to 333 K up to 5 MPa
Author(s): Cézac P. | Contamine F. | Bassil G. | Serin J.P. | Lucile F. | Baudoin O. | Houssin D. | Arpentinier P.
Volume: 3
Year: 2013



Stability of solid phases in the dexamathasone acetate/water system
Author(s): Delage S. | Couvrat N. | Sanselme M. | Cartigny Y. | Coquerel G.
Volume: 3
Year: 2013



Re-investigation of the binary system Phenanthrene/Anthracene
Author(s): Burel A. | Couvrat N. | Tisse S. | Cartigny Y. | Coquerel G.
Volume: 3
Year: 2013



Study of the ternary system water/sodium hydroxide/hydrazine for the extraction of hydrazine
Author(s): Betton C. | El Hajj A. | Le D.M. | Bougrine A.J. | Delalu H.
Volume: 3
Year: 2013



Study of binary systems NdF3- MF (M = Li, Na, K): experimental, modeling and thermodynamic computation
Author(s): Berkani M. | Gaune-Escard M.
Volume: 3
Year: 2013



Concentration of zinc ions in perchlorate medium by a menbrane-gel using an acid extractant (DEHPA)
Author(s): Belhadji L. | Belkacemi F. | Hadj-Boussaad D.E.
Volume: 3
Year: 2013



Liquid-liquid equilibria in demixing amines: a thermodynamic approach
Author(s): Ballerat-Busserolles K. | Coulier Y. | Majer V. | Coxam J-Y.
Volume: 3
Year: 2013



Thermal treatment of moroccan phosphogypsum
Author(s): El Issiouy S. | Atbir A. | Mançour-Billah S. | Bellajrou R. | Boukbir L. | El Hadek M.
Volume: 3
Year: 2013



Specific migration of IRGASTAB 17 MOK and DBP from rigid and plasticized poly(vinyl chloride) into organic liquids
Author(s): Amara A. | Zeddam C. | Belhaneche-Bensemra N.
Volume: 3
Year: 2013



Density, speed of sound and refractive index for the binary systems DBE + 1-hexene, or heptane, or cyclohexane, or 2, 2, 4 trimethyl-pentane, or toluene, or methyl-cyclohexane at 298.15 K
Author(s): Peral C. | Martínez-Terradillos A. | Aguilar F. | Alaoui F.E.M. | Montero E.
Volume: 3
Year: 2013



Oxygenated additives in bio-fuels: excess enthalpies of mixtures di-butyl ether + 1-propanol + heptane or + cyclohexane at 298.15 and 313.15 K
Author(s): Alaoui F.E.M. | Aguilar F. | González-Fernández M.J. | El Amarti A. | Montero E.
Volume: 3
Year: 2013



X-ray structural study of aqua bis (Thymine-N1, N3) ethylenediamine copper (ii) dihydrate
Author(s): Mokhtari R. | Adkhis A. | Michaud F. | Top S.
Volume: 3
Year: 2013



Rimonabant dimorphism, much ado about almost nothing
Author(s): Perrin M.-A. | Bauer M. | Barrio M. | Tamarit J.-Ll | Céolin R. | Rietveld I.B.
Volume: 3
Year: 2013



Predictive thermodynamic models and the challenges of bioprocesses
Author(s): de Hemptinne J.C | Lugo R.
Volume: 3
Year: 2013



Phase transitions in porous materials: influence of physico-chemical heterogeneities
Author(s): Puibasset J.
Volume: 3
Year: 2013



Representation of Solid, Liquid, and Vapor phases of Binary Lennard Jones Mixtures using the SLV-EoS
Author(s): Stringari P. | Campestrini M. | Coquelet C. | Arpentinier P.
Volume: 3
Year: 2013



Mass transfer of non-polar heavy hydrocarbons in aqueous phase
Author(s): Nakhlé R. | Abou Naccoul R. | Goutaudier C. | Zaydan R. | Jose J. | Saab J.
Volume: 3
Year: 2013



Heat capacity prediction of complex molecules by mass connectivity index
Author(s): Koutchoukali O. | Haloui I. | Koutchoukali M.S.
Volume: 3
Year: 2013



On transferring new constant pressure heat capacity computation methods to engineering practice
Author(s): Rajaeirad S. | Dadgostar N. | Loria H. | Satyro M. | Shaw J.M.
Volume: 3
Year: 2013



New correlative method of thermodynamic analysis of the inorganic compounds
Author(s): Vasilyev V.P. | Taldrik A.F. | Ilinykh N.I.
Volume: 3
Year: 2013



Experimental study of group IVB metals oxicarbides
Author(s): Rejasse F. | Rapaud O. | Pradeilles N. | Maitre A. | Trolliard G.
Volume: 3
Year: 2013



Modelling the sigma phase
Author(s): Mathieu R. | Dupin N. | Crivello J.-C | Joubert J.-M. | Yaqoob K. | Breidi A. | Fiorani J.-M. | David N.
Volume: 3
Year: 2013



Multi-coated magnetoelectroelastic composites with functionally graded interphases
Author(s): Bakkali A. | Azrar L. | Aljinaidi A. A.
Volume: 1
Year: 2012



Nonlinear dynamics and control strategies: On a energy harvester vibrating system with a linear form to non-ideal motor torquet
Author(s): Iliuk I. | Balthazar J. M. | Tusset A. M. | Felix J.L.P. | de Pontes B. R.
Volume: 1
Year: 2012



Using of a snap-through truss absorber in the attenuation of the sommerfeld effect
Author(s): de Godoy W.R.A. | Balthazar J.M. | Pontes B.R. | Felix J.L.P.
Volume: 1
Year: 2012



Bifurcation of Contact Between Rotor and Stator
Author(s): Alber Oliver | Markert Richard
Volume: 1
Year: 2012



Relation between synchronization of a ring of coupled Rössler systems and observability
Author(s): Kerfourn Adrien | Laval Laurent | Letellier Christophe
Volume: 1
Year: 2012



Soret-driven double diffusive magneto-convection in couple stress liquid
Author(s): Srivastava A. K. | Bhadauria B. S. | Mishra P.
Volume: 1
Year: 2012



Effect of vertical quasiperiodic vibrations on the stability of the free surface of an inviscid liquid layer
Author(s): Yagoubi M. | Aniss S. | Belhaq M.
Volume: 1
Year: 2012



Stability of plane Poiseuille flow of viscoelastic fluids in the presence of a transverse magnetic field
Author(s): Rafiki Abdessamade | Hifdi Ahmed
Volume: 1
Year: 2012



Onset of Vibrational Convection in a Binary Fluid Saturated Non-Darcy Porous Layer Heated from Above
Author(s): Sivakumar T. | Saravanan S.
Volume: 1
Year: 2012



The limits of isothermal model validity in the case of natural convection cooling of heating blocks in a horizontal channel
Author(s): Mouhtadi D. | Amahmid A. | Hasnaoui M. | Kadri E.-H. | Bennacer R.
Volume: 1
Year: 2012



Hydromagnetic and Soret driving free convection in an inclined porous cavity saturated by a conducting binary mixture
Author(s): Rtibi A. | Hasnaoui M. | Amahmid A.
Volume: 1
Year: 2012



Effect of Horizontal Vibration on the Interfacial Instability in a Horizontal Hele-Shaw Cell
Author(s): Bouchgl J. | Aniss S. | Souhar M. | Caballina O.
Volume: 1
Year: 2012



Natural Convection in a Rotating Nanofluid Layer
Author(s): Bhadauria B. S. | Agarwal Shilpi
Volume: 1
Year: 2012



Passive control of resonances by nonlinear absorbers
Author(s): Shao J.W. | Cochelin B.
Volume: 1
Year: 2012



Dynamics of a forced 2 dof piece-wise linear system by consideration of the weight
Author(s): Ture Savadkoohi A. | Lamarque C.-H. | Dimitrijevic Z.
Volume: 1
Year: 2012



Energy Partition Oscillator and Necessary and Sufficient Conditions of Energy Localization
Author(s): Pilipchuk V.N.
Volume: 1
Year: 2012



Aeroelastic instability analysis of NES-controlled systems via a mixed Multiple Scale/Harmonic Balance algorithm
Author(s): Luongo Angelo | Zulli Daniele
Volume: 1
Year: 2012



Delayed dynamical sytem strongly coupled to a nonlinear energy sink : application to machining chatter
Author(s): Gourc Etienne | Seguy Sébastien | Michon Guilhem | Berlioz Alain
Volume: 1
Year: 2012



Analysis of a passive control of a chain under wide-band random excitation by nonlinear energy sinks using generalized orthogonal decompositions
Author(s): Bellizzi S. | Sampaio R.
Volume: 1
Year: 2012



Nonlinear dynamics of nanoelectromechanical cantilevers based on nanowire piezoresistive detection
Author(s): Kacem N. | Hentz S. | Baguet S. | Dufour R.
Volume: 1
Year: 2012



Bifurcations, basin erosion and dynamic integrity in a single-mode model of noncontact atomic force microscopy
Author(s): Settimi V. | Rega G.
Volume: 1
Year: 2012



Theoretical and experimental investigation of the nonlinear response of an electrically actuated imperfect microbeam
Author(s): Ruzziconi L. | Bataineh A. M. | Younis M. I. | Lenci S.
Volume: 1
Year: 2012



Dynamics of a Micro Electrical Mechanical System Subject to Thermoelastic and Squeeze-Film Damping
Author(s): Belardinelli P. | Brocchini M. | Demeio L. | Lenci S.
Volume: 1
Year: 2012



Frequency shift and hysteresis suppression in contact-mode AFM using contact stiffness modulation
Author(s): Kirrou I. | Belhaq M.
Volume: 1
Year: 2012



Nonlinear Dynamical analysis of an AFM tapping mode microcantilever beam
Author(s): Manoubi I. | Najar F. | Choura S. | Nayfeh A. H.
Volume: 1
Year: 2012



Modeling and Design of an Electrically Actuated Resonant Switch
Author(s): Jrad M. | Younis M.I. | Najar F.
Volume: 1
Year: 2012



Camber Effects on the Power Harvesting from Piezoaeroelastic Systems
Author(s): Abdelkefi Abdessattar | Nuhait Abdullah O | Nayfeh Ali H | Hajj Muhammad R
Volume: 1
Year: 2012



Uncertainty Quantification of Piezoelectric Energy Harvesters from Aeroelastic Vibrations
Author(s): Abdelkefi Abdessattar | Hajj Muhammad R | Nayfeh Ali H
Volume: 1
Year: 2012



Nonlinear Responses of Sloshing in Square Tanks Subjected to Horizontal Random Ground Excitation
Author(s): Ikeda T. | Harata Y. | Ibrahim R. A.
Volume: 1
Year: 2012



Use of stochastic optimization techniques for damage detection in complex nonlinear systems
Author(s): Jafarkhani R. | Masri S.F.
Volume: 1
Year: 2012



Modelling of nonlinear bridge aerodynamics and aeroelasticity: a convolution based approach
Author(s): Wu T. | Kareem A.
Volume: 1
Year: 2012



Time History Forced Response in Nonlinear Mechanical Systems
Author(s): Ahlin K. | Josefsson A. | Magnevall M.
Volume: 1
Year: 2012



Experimental Identification of Concentrated Nonlinearity in Aeroelastic System
Author(s): Abdelkefi Abdessattar | Vasconcellos Rui | Hajj Muhammad R | Nayfeh Ali H
Volume: 1
Year: 2012



Vibro-impact response of the cracked structures to monitor structural health
Author(s): Babitsky V. | Hiwarkar V. | Silberschmidt V.
Volume: 1
Year: 2012



Effect of time delay on vibroimpact dynamics in a forced Hertzian contact oscillator
Author(s): Mokni L. | Bichri A. | Belhaq M.
Volume: 1
Year: 2012



The Effect of Time-Delay Feedback Controller on an Electrically Actuated Resonator
Author(s): Shao S. | Masri K. M. | Younis M. I.
Volume: 1
Year: 2012



Reliability assessment of stress concentration performance state for a perforated composite plate under traction
Author(s): Attajkani S. | Khamlichi A. | Jabbouri A.
Volume: 1
Year: 2012



Multiobjective structural damage identification in uncertain environments
Author(s): Perera R. | Sevillano E. | Ruiz A.
Volume: 1
Year: 2012



Uncertainty Analysis in the Noise Parameters Estimation
Author(s): Batko W. | Pawlik P.
Volume: 1
Year: 2012



Nonlinear Modeling and Analysis of a Vertical Springless Energy Harvester
Author(s): Bendame Mohamed | Abdel-Rahman Eihab
Volume: 1
Year: 2012



On assessing the robustness of an input signal optimization algorithm for damage detection: the Info-Gap Decision Theory approach
Author(s): Pasquali M. | Lacarbonara W. | Stull C.J. | Farrar C.R.
Volume: 1
Year: 2012



On the reliability of a PCA-based method for structural diagnosis in bridge structures with environmental disturbances
Author(s): Quaranta G. | Carboni B. | Lacarbonara W.
Volume: 1
Year: 2012



Monitoring of the ultrasonic P-wave velocity in early-age concrete using Smart Aggregates
Author(s): Dumoulin Cédric | Karaiskos Grigoris | Carette Jérôme | Staquet Stéphanie | Deraemaeker Arnaud
Volume: 1
Year: 2012



Combined scale effects for effective brazing at low temperatures
Author(s): Bartout D. | Wilden J.
Volume: 1
Year: 2012



Modeling the fluid/soil interface erosion in the Hole Erosion Test
Author(s): Kissi B. | Parron Vera M. Angel | Rubio Cintas M. D. | Khamlichi A.
Volume: 1
Year: 2012



Finite element modeling of the aluminothermic welding with internal defects and experimental analysis
Author(s): Mouallif I. | Mouallif Z. | Benali A. | Sidki F.
Volume: 1
Year: 2012



Crack’s bifurcation in an anisotropic material
Author(s): Lahna F. | Belrhazi N. | El Kaaba A.
Volume: 1
Year: 2012



Nouvelle méthode expérimentale pour déterminer le gonflement libre des sols argileux Novel experimental method to determine clay soil free swelling
Author(s): Asselman H. | Bakkali A. | Ajdour M. | Essaaidi M.
Volume: 2
Year: 2012



Application of Cold Formed Steel Framing Structures for Construction in Zones Affected by Land Subsidence
Author(s): Ortiz J.-A. | Pacheco J. | Zermeño M.-E. | Alonso F.-A. | Soto J.-J. | Moreno M.-R. | Correa L.-O.
Volume: 2
Year: 2012



Evolution de la résistance au poinçonnement d’un matériau cimentaire soumis à la flamme Evolution of the punching strength of mortar subjected to fire
Author(s): Ezziane M. | Kadri T. | Jauberthie R. | Molez L.
Volume: 2
Year: 2012



Effet de la combinaison de la chaux et de la pouzzolane naturelle sur le compactage et la résistance des sols mous argileux Effect of the combination of lime and natural pozzolana on the compaction and strength of soft clayey soils
Author(s): Harichane K. | Ghrici M. | Kenai S.
Volume: 2
Year: 2012



Experimental study of columns partially filled with concrete under compressive axial loads Etude expérimentale des colonnes partiellement remplis par le béton sous charge axiale
Author(s): Handel N. | Chiekh N.-E. | Achoura D.
Volume: 2
Year: 2012



Comportement des poteaux composites en profils creux en acier remplis de béton Behavior of composite columns in hollow steel section filled with concrete
Author(s): Fellah F. | Seridi A. | Othmani N.
Volume: 2
Year: 2012



Modèle de confinement pour les colonnes de section circulaire en béton armé confiné avec des enveloppes en polymère renforcé de fibres de carbone Confinement model for circular RC columns wrapped with CFRP composite
Author(s): Benzaid R. | Mesbah H-A.
Volume: 2
Year: 2012



Efficacité du renforcement des poutres en béton armé par des matériaux composites Efficiency of strengthening concrete beams using FRP
Author(s): Attari N. | Amziane S | Chemrouk M
Volume: 2
Year: 2012



Solution Améliorée Pour La Détermination Des Contraintes d’interfaces d’une Poutre En Béton Armé Renforcée Avec Une Plaque En Composite. Improved closed-form solution to interfacial stresses in RC beams strengthened with FRP strip
Author(s): Krour B. | Bernard F. | Tounsi A. | Adda Bedia E. A.
Volume: 2
Year: 2012



Evaluation de la vulnérabilité sismique des constructions en béton armé en vue de leur réhabilitation Evaluating seismic vulnerability of reinforced concrete buildings in view of their rehabilitation
Author(s): El Haouzi A. | Khamlichi A. | Bezzazi M. | Almansa F. Lopez
Volume: 2
Year: 2012



Use of metakaolin in grouts intended for soil nailing
Author(s): Trinh M. | Cyr M. | Husson B. | Casaux-Ginestet G. | Robit P.
Volume: 2
Year: 2012



Performance of externally CFRP confined RC columns with changes in thickness of the wrap, slenderness of the column and shape of the section
Author(s): Chikh N. | Mesbah H. | Gahmous M. | Benzaid R.
Volume: 2
Year: 2012



Comparaison performantielle à court et à long termes de mortiers légers à base de déchets de mousse de polyuréthane rigide et de billes de polystyrène expansé Comparison of short and long-term performances of lightweight aggregate mortars made with polyurethane foam waste and expanded polystyrene beads
Author(s): Kismi M. | Mounanga P.
Volume: 2
Year: 2012



Ajout de phosphogypse à des mortiers à base de cendres volantes et filler calcaire Addition of phosphogypsum to blended mortars based on fly ash and limestone filler
Author(s): Raoui A. | Diouri A. | Kamali-Bernard S. | Alami Talbi M.
Volume: 2
Year: 2012



Caractérisation physico-chimique de boues d’unité de production d’eau potable Physico-chemical characterization of sludge from a unit water drinking production
Author(s): Dahhou M. | El Moussaouiti M. | Khachani N. | Assafi M. | Ait Hsain L. | Mostahsine S. | Bouqallaba K.
Volume: 2
Year: 2012



Influence de la nature chimique et minéralogique des argiles et du processus de fabrication sur la qualité des carreaux céramiques Influence of chemical and mineralogical nature of clay and manufacturing process on the quality of ceramic tiles
Author(s): Sadik C. | El Amrani I. | Albizane A.
Volume: 2
Year: 2012



Recyclage de déchets industriels, phosphogypse et cendres volantes, dans des matériaux de construction Recycling of industrial wastes, phosphogypsum and fly ash, in building materials
Author(s): Manal N. | Samdi A. | Elabassi K. | Gomina M. | Moussa R.
Volume: 2
Year: 2012



Caractérisation microstructurale et mécanique d’un composite cimentaire renforcé par des fibres de lin Characterizations mechanical and microstructural of flax fibre cement composite reinforced
Author(s): Tung L. H. | Khadraoui F. | Boutouil M. | Gomina M.
Volume: 2
Year: 2012



Study of the effect of the nature of aggregates on the mechanical behaviour of the concrete in hot and dry zones «Contribution of the curing» Etude de l’effet de la nature des granulats sur le comportement mécanique du béton en zones chaudes et arides «Contribution de la cure»
Author(s): Bendjillali K. | Makhloufi Z.
Volume: 2
Year: 2012



Durabilité de pâtes de ciments contenant du laitier d’El Hadjar conservées dans des milieux agressifs et à des températures de climat chaud Durability of cement pastes containing slag of El Hajar preserved in aggressive environments and at temperatures of hot climate
Author(s): Behim M. | Clastres P.
Volume: 2
Year: 2012



Perméabilité au gaz et aux ions chlore des mortiers à base de laitier de faible hydraulicité Gas and chloride ions permeability of mortar with low hydraulicity slag
Author(s): Sadok A. Hadj | Kenai S. | Courard L.
Volume: 2
Year: 2012



Recycling Jorf Lasfar fly ash as an additive to cement
Author(s): Nabih K | Quabou A | Hamadi A
Volume: 2
Year: 2012



Etude du comportement mécanique de liants binaires et ternaires à base de ciment Portland, de laitier de haut fourneau et de filler calcaire Study of the mechanical behavior of slag-limestone fillercement blended binders
Author(s): Khalifa N.E.H. | Bouasker M. | Mounanga P. | Ben Kahla N.
Volume: 2
Year: 2012



Influence du type d’addition minérale sur les propriétés de transfert des Bétons AutoPlaçants Influence of the type of mineral admixtures on the transport properties of self compacting concrete
Author(s): Siad H. | Kamali Bernard S. | Mesbah H.A. | Mouli M. | Khelafi H.
Volume: 2
Year: 2012



Etude de l’activité pouzzolanique d’une roche andésitique en Algérie Study of the pozzolanic activity of an andesitic rock in Algeria
Author(s): Hamidi M. | Kacimi L. | Cyr M. | Clastres P.
Volume: 2
Year: 2012



Absorption de l’eau et son effet sur la durabilité des bétons de sable allégés par ajout de copeaux de bois Water absorption and its effect on the durability of sand concrete lightened by the addition of wood shavings
Author(s): Bederina M. | Bouziani T. | Khenfer M. | Quéneudec M.
Volume: 2
Year: 2012



Hydration behavior of iron doped calcium sulfoaluminate phase at room temperature
Author(s): Idrissi M. | Diouri A. | Alami Talbi M. | Sassi O. | Taibi M. | Damidot D.
Volume: 2
Year: 2012



Un outil pour la valorisation des laitiers d’aciérie de conversion en techniques routières A tool for BOF Slag’s valorisation in roads
Author(s): Lecomte A. | Diliberto C. | Dao P-L. | Sommier M. | Basso P.
Volume: 2
Year: 2012



Permeability and mechanical properties of cement mortars colored by nano-mineral additives
Author(s): Ez-zaki H. | Diouri A. | Kamali Bernard S. | Khachani N.
Volume: 2
Year: 2012



Properties of Portland-Composite Cements with metakaolin: Commercial and manufactured by Thermal Activation of Serbian Kaolin Clay
Author(s): Mitrovic A. | Nikolic D.
Volume: 2
Year: 2012



Valorisation du sable de concassage et du sable du désert dans la composition des bétons autoplaçants Valorization of the crushed sand and of the desert sand in the composition of the self compacting concrete
Author(s): R’mili A. | Ben Ouezdou M.
Volume: 2
Year: 2012



A Discrete Model for the Natural Frequencies and Mode Shapes of Constrained Vibrations of Beams with Various Boundary Conditions
Author(s): Rahmouni A. | Beidouri Z. | Benamar R.
Volume: 1
Year: 2012



Non-linear forced vibration analysis of rectangular plates including the coupling between transverse and in-plane displacements.
Author(s): Merrimi E. | El Bikri K. | Benamar R.
Volume: 1
Year: 2012



Reconstruction of distributed force characteristics in case of non punctual objects impacting beams
Author(s): El-Bakari A. | Khamlichi A. | Dkiouak R. | Liman A.
Volume: 1
Year: 2012



Synthesis of multi-input Volterra systems by a topological assemblage scheme
Author(s): Carassale L. | Kareem A.
Volume: 1
Year: 2012



A Closed Form Expression for Predicting Fast Scale Instability in Switching Buck Converters
Author(s): El Aroudi Abdelali
Volume: 1
Year: 2012



Effects of in-plane inertia on natural frequency and stresses of long circular cylindrical shell
Author(s): Rougui M. | Karimin A.
Volume: 1
Year: 2012



Effect of fast frequency excitation on tower oscillations under turbulent wind flow
Author(s): Kirrou I. | Mokni L. | Belhaq M.
Volume: 1
Year: 2012



Liquefaction of Tangier soils by using physically based reliability analysis modelling
Author(s): Touil N. | Khamlichi A. | Jabbouri A. | Dubujet P.
Volume: 1
Year: 2012



Solution of internal erosion equations by asymptotic expansion
Author(s): Yakhlef F. | Khamlichi A. | Bezzazi M. | Parron Vera M.A. | Dubujet P.
Volume: 1
Year: 2012



Experimental validation of a new magnetic method applied to diagnose a low voltage breaker arc
Author(s): Machkour N. | Kheddioui Elm. | Bourjillate A.
Volume: 1
Year: 2012



Nonlinear Dynamic Response of Compliant Journal Bearings
Author(s): Cha M. | Glavatskih S.
Volume: 1
Year: 2012



The effects of large vibration amplitudes on the mode shapes and natural frequencies of thin isotropic skew plates
Author(s): Mly Abdelali H. | El Bikri K. | Benamar R.
Volume: 1
Year: 2012



Large amplitude free vibration analysis of functionally graded beams using an homogenisation procedure
Author(s): EL Bikri K. | Zerkane A. | Benamar R.
Volume: 1
Year: 2012



A reduced order model for nonlinear vibroacoustic problems
Author(s): Gerges Youssef | Guedri Mohamed | Sadoulet-Reboul Emeline | Ouisse Morvan | Bouhaddi Noureddine
Volume: 1
Year: 2012



Vibration response of a railway track obtained using numerical models based on FEM
Author(s): Zougari A. | Martínez Miralles J. | Cardona Foix S.
Volume: 1
Year: 2012



Fuzzy Control of Rotor System Using an Electromagnetic Actuator
Author(s): Koroishi E. H. | Steffen V. | Mahfoud J.
Volume: 1
Year: 2012



Dynamic instability analysis of single walled Carbone Nano Tubes conveying fluid under generalized boundary conditions
Author(s): Azrar A. | Azrar L. | Aljinaidi A. A.
Volume: 1
Year: 2012



Analyse géotechnique et évaluation du risque lié à l’instabilité le long de la falaise du quartier Hassan (Rabat-Maroc) Geotechnical analysis and evaluation of the instability risk along the Hassan district cliff (Rabat-Morocco)
Author(s): Bahedi Kh. | Benammi M.
Volume: 2
Year: 2012



Corrélation entre la vitesse d’onde P et la conductivité thermique des matériaux hétérogènes et poreux A Correlation between P-wave velocity and thermal conductivity of heterogeneous porous materials
Author(s): Boulanouar A. | Rahmouni A. | Boukalouch M. | Géraud Y. | El Hassani I. El Amrani | Harnafi M. | Sebbani M.J.
Volume: 2
Year: 2012



La cimenterie de Temara : besoins d’un nouveau gisement de calcaires (cas du gisement de l’oued Cherrat) The cement Temara: needs a new deposit of limestone (case the deposit of oued Cherrat)
Author(s): Nahraoui F.Z. | Wartiti M. El | Boukili B. | Moutaouakkil N.El | Kacimi I. | Idrissi H. Amrani | Kharchof A.El.K. | Maalam B.
Volume: 2
Year: 2012



Caractérisation de formations Miocène de la région de Taza pour des valorisations et exploitations industrielles Industrial value of the Miocene calcarenites in the region of Taza
Author(s): Mesrar L. | Aroussi O. El | Lakrim M. | Lahrach A. | Chaouni A. | Jabrane R.
Volume: 2
Year: 2012



Etude en laboratoire de l’effet du rapport de surconsolidation sur le comportement non drainé des sols. Laboratory study of overconsolidated ratio of the undrained soil behavior.
Author(s): Djafar Henni A. | Arab A. | Khelafi H.
Volume: 2
Year: 2012



Nouvelle approche pour le suivi de la réactivité de phases SiO2 soumises à la Réaction Alcali Silice (RAS) New approach for monitoring the reactivity of SiO2 phases subject to Alkali Silica Reaction (SAR)
Author(s): Jabkhiro E. | Hamoudi A. | Khouchaf L. | Boinski F. | Harfouche M.
Volume: 2
Year: 2012



Durée de vie des réseaux d’assainissement, modélisation Service life in sewerage system, simulation
Author(s): Jauberthie C. | Jauberthie R. | Melinge Y.
Volume: 2
Year: 2012



Effect of Local Temperature during Service On the Strength of Concrete
Author(s): Merbouh M. | Hamouine A | Benoudjafar I
Volume: 2
Year: 2012


