Academic Journals Database
Disseminating quality controlled scientific knowledge

Analysis of impedance measurements of a suspension of microcapsules using a variable length impedance measurement cell

Author(s): Dejan Krizaj | Borut Pečar

Journal: Journal of Electrical Bioimpedance
ISSN 1891-5469

Volume: 3;
Issue: 1;
Start page: 42;
Date: 2012;
Original page

Keywords: impedance | suspension | double layer | measurement cell | varying length

Electrical impedance measurements of the suspensions have to take into account the double layer impedance that is due to a very thin charged layer formed at the electrode-electrolite interface. A dedicated measuring cell that enables variation of the distance between the electrodes was developed for investigation of electrical properties of suspensions using two electrode impedance measurements. By varying the distance between the electrodes it is possible to separate the double layer and the suspension impedance from the measured data. From measured and extracted impedances electrical lumped models have been developed. The error of non inclusion of the double layer impedance has been analyzed. The error depends on the frequency of the measurements as well as on the distance between the electrodes.
RPA Switzerland

RPA Switzerland

Robotic process automation


Tango Jona
Tangokurs Rapperswil-Jona