Academic Journals Database
Disseminating quality controlled scientific knowledge

Study on critical damage factor and the constitutive model including dynamic recrystallization softening of AZ80 magnesium alloy

ADD TO MY LIST
 
Author(s): Xue Y. | Zhang Z.M. | Wu Y.J.

Journal: Science of Sintering
ISSN 0350-820X

Volume: 45;
Issue: 2;
Start page: 199;
Date: 2013;
VIEW PDF   PDF DOWNLOAD PDF   Download PDF Original page

Keywords: AZ80 magnesium alloy | critical damage factor | constitutive model | dynamic recrystallization | strain softening

ABSTRACT
Quantities AZ80 magnesium alloy billets were compressed with 60 % height reduction on hot process simulator at 473, 523, 573, 623, 673, 723 K under strain rates of 0.001, 0.01, 0.1, 1 and 10 s-1. In order to predict the occurrence of surface fracture, the critical damage factor based on the Cockcroft-Latham equation were obtained by analysing the results of the corresponding finite element calculation. The results show that the critical damage factor at 523, 573, 623, 673 K under strain rates of 0.001, 0.01, 0.1 and 1 s-1 is not a constant but varies in a range from 0.1397 to 0.4653. Meanwhile, a constitutive model with a few parameters is used to characterize the dynamic recrystallization strain softening of AZ80 alloy, which comprehensively reflect the effects of the deformation temperature, strain and strain rate on the flow stress.
RPA Switzerland

RPA Switzerland

Robotic process automation

    

Tango Rapperswil
Tango Rapperswil