Academic Journals Database
Disseminating quality controlled scientific knowledge

Tuning PID Controller by Neural Network for Robot Manipulator Trajectory Tracking

ADD TO MY LIST
 
Author(s): Saad Zaghlul Saeed Al-Khayyt

Journal: Al-Khawarizmi Engineering Journal
ISSN 1818-1171

Volume: 9;
Issue: 1;
Start page: 19;
Date: 2013;
Original page

Keywords: PID controller | Neural Network | Self tuning controller | Robot manipulator | Trajectory tracking.

ABSTRACT
Ziegler and Nichols proposed the well-known Ziegler-Nichols method to tune the coefficients of PID controller. This tuning method is simple and gives fixed values for the coefficients which make PID controller have weak adaptabilities for the model parameters variation and changing in operating conditions. In order to achieve adaptive controller, the Neural Network (NN) self-tuning PID control is proposed in this paper which combines conventional PID controller and Neural Network learning capabilities. The proportional, integral and derivative (KP, KI, KD) gains are self tuned on-line by the NN output which is obtained due to the error value on the desired output of the system under control. The conventional PID controller in the robot manipulator is replaced by NN self tuning PID controller so as to achieve trajectory tracking with minimum steady-state error and improving the dynamic behavior (overshoot). The simulation results showed that the proposed controller has strong self-adaptability over the conventional PID controller.
RPA Switzerland

Robotic Process Automation Switzerland

    

Tango Jona
Tangokurs Rapperswil-Jona