Academic Journals Database
Disseminating quality controlled scientific knowledge

Drvna industrija

ISSN: 0012--6772
Publisher: Faculty of Forestry, Zagreb University


ADD TO MY LIST
 
The Dilemma Whether to Produce Glued or Sawn Wooden Beams?

Author(s): Michal Zeman
Volume: 64
Issue: 2
Year: 2013
Analysis of the Investment in Wood Processing and Furniture Manufacturing Entities by Key Factors of Competitiveness

Author(s): Renata Ojurović | Maja Moro | Ksenija Šegotić | Tomislav Grladinović | Leon Oblak
Volume: 64
Issue: 2
Year: 2013
Evaluation of Mechanical Properties and Formaldehyde Emission of Plywood Manufactured for Construction Applications

Author(s): Mohamed Salem | Martin Böhm | Jaromír Srba
Volume: 64
Issue: 2
Year: 2013
Thermally Compressed Poplar Wood (TCW): Physical and Mechanical Properties

Author(s): Zeki Candan | Suleyman Korkut | Oner Unsal
Volume: 64
Issue: 2
Year: 2013
Natural Durability of Timber Exposed Above Ground – a Survey

Author(s): Christian Brischke | Linda Meyer | Gry Alfredsen | Miha Humar | Lesley Francis | Per-Otto Flæte | Pia Larsson-Brelid
Volume: 64
Issue: 2
Year: 2013
Standardized Methods for Determining and Estimating Wood Moisture Content in the Republic of Croatia

Author(s): Stjepan Pervan | Miljenko Klarić | Marko Slivar
Volume: 64
Issue: 2
Year: 2013
Selected Wood Properties of Prunus Africana (Hook) Grown in Kenya as Possible Reasons for its High Natural Durability

Author(s): Francis Mburu | Peter Sirmah | Fred Muisu | Stéphane Dumarcay | Philippe Gérardin
Volume: 64
Issue: 1
Year: 2013
Models of Hybrid Springs for Ergonomic Seats and Mattresses

Author(s): Jerzy Smardzewski
Volume: 64
Issue: 1
Year: 2013
Influence of Gluing Technology on Physical and Mechanical Properties of Laminated Veneer Lumber

Author(s): Murčo Obućina, Goran Turk, Ejub Džaferović, Jože Resnik | Goran Turk | Ejub Džaferović | Jože Resnik
Volume: 64
Issue: 1
Year: 2013
CE Marking of Structural Timber: the European Standardization Framework and its Effects on Italian Manufacturers

Author(s): Francesco Negro | Corrado Cremonini | Roberto Zanuttini
Volume: 64
Issue: 1
Year: 2013
Some of the Physical Properties of UV Jet Printed Furniture Surfaces

Author(s): Suat Altun | Didem Köse
Volume: 64
Issue: 1
Year: 2013
Studies on Mechanical Properties of Composite Materials Based on Thermo Modified Timber

Author(s): Evgeny Razumov | Ruslan Safin | Štefan Barcík | Monika Kvietková | Khasanshin Romelevich
Volume: 64
Issue: 1
Year: 2013
Content of Total Phenols in Red Heart and Wound-Associated Wood in Beech (Fagus sylvatica L.)

Author(s): Viljem Vek | Primož Oven
Volume: 64
Issue: 1
Year: 2013
Sustainable Development and Green Buildings

Author(s): Arijit Sinha | Rakesh Gupta | Andreja Kutnar
Volume: 64
Issue: 1
Year: 2013
Bioremediation of Lindane by Wood-Decaying Fungi

Author(s): Ajda Ulčnik | Irena Kralj Cigić | Lucija Zupančič-Kralj | Črtomir Tavzes | Franc Pohleven
Volume: 63
Issue: 4
Year: 2012
Bending Capacity of Middle Joints of Upholstered Furniture Frames

Author(s): Vasiliki Kamperidou, Vasileios Vasileiou | Vasiliki Kamperidou, Vasileios Vasileiou
Volume: 63
Issue: 4
Year: 2012
The Effect of Residual Swelling after Drying on Internal Bond in OSB

Author(s): Radosław Mirski | Jerzy Majka | Dorota Dziurka
Volume: 63
Issue: 4
Year: 2012
Thermal Comfort While Sitting on Office Chairs – Subjective Evaluations

Author(s): Zoran Vlaović | Danijela Domljan | Ivica Župčić | Ivica Grbac
Volume: 63
Issue: 4
Year: 2012
Some Physical and Mechanical Properties of Plum Tree (Prunus Domestica L.)

Author(s): Slavko Govorčin | Tomislav Sinković | Tomislav Sedlar | Iva Ištok | Marinko Vukadin
Volume: 63
Issue: 4
Year: 2012
Possibilities for Thermography Application in Hydrothermal Wood Processing

Author(s): Stjepan Pervan | Mladen Brezović | Silvana Prekrat | Miljenko Klarić | Goran Sazdevski
Volume: 63
Issue: 4
Year: 2012
Choice of Quantitative Method for Forecasting of Parquet Sales

Author(s): Leon Oblak | Lidija Zadnik Stirn | Maja Moro | Jasna Hrovatin | Samo Mole | Manja Kitek Kuzman
Volume: 63
Issue: 4
Year: 2012
Application of Accounting and Reporting in a Cost-Oriented Quality Management in Wood-Processing Companies

Author(s): Anna Šatanová, Lucia Krajčirova | Anna Šatanová, Lucia Krajčirova
Volume: 63
Issue: 4
Year: 2012
Effect of Hydro- and Hygro-Thermal Treatments on Some Wood Properties of Pinus Radiata and Pseudotsuga Menziesii

Author(s): Francisco Burgos | Aldo Rolleri
Volume: 63
Issue: 3
Year: 2012
Wood Sector Media Promotion in Some South-East European Countries

Author(s): Denis Jelačić | Leon Oblak | Slavica Petrović | Maja Moro | Andreja Pirc Barčić | Vanja Ćošić | Živka Meloska
Volume: 63
Issue: 3
Year: 2012
Energy-Efficient Renovation Principles for Prefabricated Timber-Frame Residential Buildings

Author(s): Vesna Žegarac | Miroslav Premrov | Manja Kuzman
Volume: 63
Issue: 3
Year: 2012
Drying Kinetics of Poplar (Populus Deltoides) Wood Particles by a Convective Thin Layer Dryer

Author(s): Hamid Zarea Hosseinabadi | Kazem Doosthoseini | Mohammad Layeghi
Volume: 63
Issue: 3
Year: 2012
Quality of Corner Joints of Beech Chairs under Load

Author(s): Silvana Prekrat | Jerzy Smardzewski | Mladen Brezović | Stjepan Pervan
Volume: 63
Issue: 3
Year: 2012
Determination of Fire and Burning Properties of Spruce Wood

Author(s): Martin Zachar | Iveta Mitterová | Qiang Xu | Andrea Majlingová | Jin Cong | Štefan Galla
Volume: 63
Issue: 3
Year: 2012
Insurance Models of Wood Sector Companies

Author(s): Mario Koprolčec | Darko Motik | Leon Oblak
Volume: 63
Issue: 3
Year: 2012
Shrinkage of Grand Fir Wood and its Variability within the Stem

Author(s): Jiří Lukášek | Aleš Zeidler | Štefan Barcík
Volume: 63
Issue: 2
Year: 2012
Research of Temperature and Moisture during Sitting on Office Chairs

Author(s): Zoran Vlaović | Danijela Domljan | Ivica Grbac
Volume: 63
Issue: 2
Year: 2012
Convective Drying of Beech Lumber without Color Changes of Wood

Author(s): Ladislav Dzurenda | Nencho Deliiski
Volume: 63
Issue: 2
Year: 2012
Diagnostics of Circular Sawblade Vibration by Displacement Sensors

Author(s): Přemysl Veselý | Zdeněk Kopecký | Zdeněk Hejmal | Přemysl Pokorný
Volume: 63
Issue: 2
Year: 2012
Improving of Maintenance of Humidifying System in Conventional Wood Kiln Dryers

Author(s): Miljenko Klarić | Stjepan Pervan
Volume: 63
Issue: 2
Year: 2012
Determinants of Effects of Foreign Direct Investment in Terms of Slovak Republic and Wood-Processing Industry of Slovakia

Author(s): Martina Merková | Josef Drábek | Denis Jelačić
Volume: 63
Issue: 2
Year: 2012
Adaptability of Kitchen Furniture for Elderly People in Terms of Safety

Author(s): Jasna Hrovatin | Kaja Širok | Simona Jevšnik | Leon Oblak | Jordan Berginc
Volume: 63
Issue: 2
Year: 2012
A Comparative Analysis of Consumer Attitudes on the Use of Wood Products in Slovenia and Croatia

Author(s): Manja Kitek Kuzman | Darko Motik | Kristina Bičanić | Richard Vlosky | Leon Oblak
Volume: 63
Issue: 2
Year: 2012
Optimization of Double Thread Nuts Screwing Process

Author(s): Goran Mihulja | Dominik Poljak | Tomislav Basar
Volume: 63
Issue: 1
Year: 2012
Investigations of the Compressive Behaviour of Veneer in Thickness Direction

Author(s): Beate Buchelt | Alexander Pfriem | André Wagenführ
Volume: 63
Issue: 1
Year: 2012
Lumber Recovery Efficiency among Selected Sawmills in Akure, Nigeria

Author(s): Babatola Olufemi | Joseph Olalekan Akindeni | Samuel Oluyinka Olaniran
Volume: 63
Issue: 1
Year: 2012
Compression Strength of Fir and Beech Wood Modified by Citric Acid

Author(s): Bogoslav Šefc | Jelena Trajković | Tomislav Sinković | Marin Hasan | Iva Ištok
Volume: 63
Issue: 1
Year: 2012
Distribution of Mineral Substances in Different Wood Tissues of European Larch (Larix decidua Mill.)

Author(s): Janja Zule | Jožica Dolenc
Volume: 63
Issue: 1
Year: 2012
Economical Wood Sawing with Circular Saw Blades of a New Design

Author(s): Roman Wasielewski | Kazimierz Orlowski | Stanislaw Szyszkowski
Volume: 63
Issue: 1
Year: 2012
Scientific-Research Cluster as a form of Knowledge Transfer

Author(s): Renata Nováková
Volume: 62
Issue: 4
Year: 2011
Extraction Methods of Spanish Broom (Spartium Junceum L.)

Author(s): Drago Katović | Andrea Katović | Alan Antonović
Volume: 62
Issue: 4
Year: 2011
RPA Switzerland

RPA Switzerland

Robotic process automation

    

Tango Jona
Tangokurs Rapperswil-Jona