Tribological Study of Biocompatible Hybrid Organic Molecules Film with Antibacterial Effect

Author(s): J.H. Horng | C.C. Wei | S.Y. Chern | W.H. Kao | K.W. Chen | Y.S. Chen
Volume: 35
Issue: 2
Year: 2013

Influence of Rice Husk Ash – Silicon Carbide Weight Ratios on the Mechanical behaviour of Al-Mg-Si Alloy Matrix Hybrid Composites

Author(s): K.K. Alaneme | T.M. Adewale
Volume: 35
Issue: 2
Year: 2013

Wear Properties of A356/10SiC/1Gr Hybrid Composites in Lubricated Sliding Conditions

Author(s): M. Babić | B. Stojanović | S. Mitrović | I. Bobić | N. Miloradović | M. Pantić | D. Džunić
Volume: 35
Issue: 2
Year: 2013

Tribological Behavior of Thermal Spray Coatings, Deposited by HVOF and APS Techniques, and Composite Electrodeposits Ni/SiC at Both Room Temperature and 300 °C

Author(s): A. Lanzutti | M. Lekka | E. Marin | L. Fedrizzi
Volume: 35
Issue: 2
Year: 2013

Roughness and Texture Concepts in Tribology

Author(s): N.K.Myshkin | A.Ya. Grigoriev
Volume: 35
Issue: 2
Year: 2013

Prediction of Coated Tools Performance in Milling Based on the Film Fatigue at Different Strain Rates

Author(s): K.D. Bouzakis | R. Paraskevopoulou | G. Katirtzoglou | S. Makrimallakis | E. Bouzakis | P. Charalampous
Volume: 35
Issue: 2
Year: 2013

Analyzing the Surface Roughness Effects on Piston Skirt EHL in Initial Engine Start-Up Using Different Viscosity Grade Oils

Author(s): M. Gulzar | S.A. Qasim | R.A. Mufti
Volume: 35
Issue: 2
Year: 2013

Abrasive Wear Resistance of the Iron- and WC-based Hardfaced Coatings Evaluated with Scratch Test Method

Author(s): A. Vencl | B. Gligorijević | B. Katavić | B. Nedić | D. Džunić
Volume: 35
Issue: 2
Year: 2013

Tribological Characterisation of PBT + Glass Bead Composites with the Help of Block-on-Ring Test

Author(s): C. Georgescu | M. Botan | L. Deleanu
Volume: 35
Issue: 2
Year: 2013

Stresses and Deformations Analysis of a Dry Friction Clutch System

Author(s): O.I. Abdullah | J. Schlattmann | A.M. Al-Shabibi
Volume: 35
Issue: 2
Year: 2013

Mechanical Properties and Corrosion Behaviour of Aluminium Hybrid Composites Reinforced with Silicon Carbide and Bamboo Leaf Ash

Author(s): K.K. Alaneme | B.O. Ademilua | M.O. Bodunrin
Volume: 35
Issue: 1
Year: 2013

The Initial Estimate of the Useful Lifetime of the Oil in Diesel Engines Using Oil Analysis

Author(s): S.A. Adnani | S.J. Hashemi | A. Shooshtari | M.M. Attar
Volume: 35
Issue: 1
Year: 2013

Effect of Contact Temperature Rise During Sliding on the Wear Resistance of TiNi Shape Memory Alloys

Author(s): S.K. Roy Chowdhury | K. Malhotra | H. Padmawar
Volume: 35
Issue: 1
Year: 2013

The Effect of Compression Ring Profile on the Friction Force in an Internal Combustion Engine

Author(s): A. Sonthalia | C.R. Kumar
Volume: 35
Issue: 1
Year: 2013

Shakedown Behavior in Multiple Normal Loading-Unloading of an Elastic-Plastic Spherical Stick Contact

Author(s): B. Chatterjee | P. Sahoo
Volume: 35
Issue: 1
Year: 2013

Heat Exchanger Tube to Tube Sheet Joints Corrosion Behavior

Author(s): M. Iancu | R.G. Ripeanu | I. Tudor
Volume: 35
Issue: 1
Year: 2013

Investigation of Wear Coefficient of Manganese Phosphate Coated Tool Steel

Author(s): S. Ilaiyavel | A. Venkatesan
Volume: 35
Issue: 1
Year: 2013

Examination of Wear Resistance of Polymer – Basalt Composites

Author(s): A. Todić | D. Čikara | V. Lazić | T. Todić | I. Čamagić | A. Skulić | D. Čikara
Volume: 35
Issue: 1
Year: 2013

Experimental Investigation on Friction and Wear Properties of Different Steel Materials

Author(s): M.A. Chowdhury | D.M. Nuruzzaman
Volume: 35
Issue: 1
Year: 2013

Effects of Velocity-Slip and Viscosity Variation in Squeeze Film Lubrication of Two Circular Plates

Author(s): R.R. Rao | K. Gouthami | J.V. Kumar
Volume: 35
Issue: 1
Year: 2013

Correlation between Surface Roughness Characteristics in CO2 Laser Cutting of Mild Steel

Author(s): M. Madić | M. Radovanović | B. Nedić
Volume: 34
Issue: 4
Year: 2012

The Wear Characteristics of Heat Treated Manganese Phosphate Coating Applied to AlSi D2 Steel with Oil Lubricant

Author(s): Ilaiyavel Sivakumaran | Venkatesan Alankaram
Volume: 34
Issue: 4
Year: 2012

Finite Element Analysis of Temperature Field in Automotive Dry Friction Clutch

Author(s): O.I. Abdullah | J. Schlattmann
Volume: 34
Issue: 4
Year: 2012

Influence of Gas Flow Rate on the Deposition Rate on Stainless Steel 202 Substrates

Author(s): M.A. Chowdhury | D.M. Nuruzzaman
Volume: 34
Issue: 4
Year: 2012

Tribological Potential of Hybrid Composites Based on Zinc and Aluminium Alloys Reinforced with SiC and Graphite Particles

Author(s): S. Mitrović | M. Babić | B. Stojanović | N. Miloradović | M. Pantić | D. Džunić
Volume: 34
Issue: 4
Year: 2012

Development of Polyester/Eggshell Particulate Composites

Author(s): S.B. Hassan | V.S. Aigbodion | S.N. Patrick
Volume: 34
Issue: 4
Year: 2012

Effect of Manganese Additions and Wear Parameter on the Tribological Behaviour of NFGrey (8) Cast Iron

Author(s): J.O. Agunsoye | E.F. Ochulor | S.I. Talabi | S. Olatunji
Volume: 34
Issue: 4
Year: 2012

Multiple Roughness Characteristics of Chemically Deposited Ni-P-W Coatings

Author(s): S. Roy | P. Sahoo
Volume: 34
Issue: 4
Year: 2012

Wet Friction-Elements Boundary Friction Mechanism and Friction Coefficient Prediction

Author(s): WANG Yanzhong | WEI Bin | WU Xiangyu
Volume: 34
Issue: 4
Year: 2012

Residual Stress Distribution in PVD-Coated Carbide Cutting Tools-Origin of Cohesive Damage

Author(s): B. Denkena | B. Breidenstein
Volume: 34
Issue: 3
Year: 2012

Enhanced Biodegradability, Lubricity and Corrosiveness of Lubricating Oil by Oleic Acid Diethanolamide Phosphate

Author(s): Chen Boshui | Zhang Nan | Liang Kai | Fang Jianhua
Volume: 34
Issue: 3
Year: 2012

On the Performance of Pivoted Curved Slider Bearings: Rabinowitsch Fluid Model

Author(s): U.P. Singh | R.S. Gupta | V.K. Kapur
Volume: 34
Issue: 3
Year: 2012

Reparatory and Manufacturing Hard-Facing of Working Parts Made of Stainless Steels in Confectionary Industry

Author(s): S. Rakic | V. Lazic | S. Aleksandrovic | S. Mitrovic | R. Nikolic | D. Milosavljevic | R. Cukic
Volume: 34
Issue: 3
Year: 2012

Experimental Investigation of Friction Effect on Liner Model Rolling Bearings for Large Diameter Thrust Bearing Design

Author(s): S. Babu | K. Manisekar | M.S. Starvin
Volume: 34
Issue: 3
Year: 2012

Influence of Combined Hard and Fine Machining on the Surface Properties of Cemented Carbides

Author(s): K. Andreas | M. Merklein | U. Engel
Volume: 34
Issue: 3
Year: 2012

Development of an Extrusion Process to Ameliorate the Tribological Properties of Heat Treated Al Mg Si (Cu) System Alloys Matrix Composites in Consolidated State

Author(s): M.O. Shabani | A. Mazahery
Volume: 34
Issue: 3
Year: 2012

Monitoring Lubricant Performance in Field Application

Author(s): S. Peric | B. Nedic
Volume: 34
Issue: 2
Year: 2012

Traction Possibilities of Mining Railways with Frictional Drives

Author(s): F. Kazimierz
Volume: 34
Issue: 2
Year: 2012

Magnetic Fluid-Based Squeeze Film Performance in Rotating Curved Porous Circular Plates: The Effect of Deformation and Surface Roughness

Author(s): M.E. Shimpi | G.M. Deheri
Volume: 34
Issue: 2
Year: 2012

Vanadium Alloyed PVD CrAlN Coatings for Friction Reduction in Metal Forming Applications

Author(s): K. Bobzin | N. Bagcivan | M. Ewering | R.H. Brugnara
Volume: 34
Issue: 2
Year: 2012

Cutting Parameters Optimization for Surface Roughness in Turning Operation of Polyethylene (PE) Using Taguchi Method

Author(s): D. Lazarevic | M. Madic | P. Jankovic | A. Lazarevic
Volume: 34
Issue: 2
Year: 2012

Effect of Heat Treatment on the Abrasive Wear Behavior of High Chromium Iron under Dry Sliding Condition

Author(s): J.O. Agunsoye | A.A. Ayeni
Volume: 34
Issue: 2
Year: 2012

Wear Behavior of PVD-Coatings

Author(s): M. Merklein | T. Schrader | U. Engel
Volume: 34
Issue: 2
Year: 2012

Wear Behaviour of Al-Si-Fe Alloy/Coconut Shell Ash Particulate Composites

Author(s): A. Apasi | P.B. Madakson | D.S. Yawas | V.S. Aigbodion
Volume: 34
Issue: 1
Year: 2012

Wear Behaviour of Hard Cr Coatings for Cold Forming Tools Under Dry Sliding Conditions

Author(s): S. Mitrović | M. Babić | D. Adamović | F. Živić | D. Džunić | M. Pantić
Volume: 34
Issue: 1
Year: 2012

PVD-Alumina Coatings on Cemented Carbide Cutting Tools: A Study About the Effect on Friction and Adhesion Mechanism

Author(s): S.E. Cordes
Volume: 34
Issue: 1
Year: 2012

Friction Coefficient of Different Material Pairs Under Different Normal Loads and Sliding Velocities

Author(s): M.A. Chowdhury | D.M. Nuruzzaman | A.H. Mia | M.L. Rahaman
Volume: 34
Issue: 1
Year: 2012

Effect of Nano Oil Additive Proportions on Friction and Wear Performance of Automotive Materials

Author(s): A. Vadiraj | G. Manivasagam | K. Kamani | V.S. Sreenivasan
Volume: 34
Issue: 1
Year: 2012

PVD Coatings’ Strength Properties at Various Temperatures by Nanoindentations and FEM Calculations Determined

Author(s): K.-D. Bouzakis | M. Pappa | S. Gerardis | G. Skordaris | E. Bouzakis
Volume: 34
Issue: 1
Year: 2012

Wear Behavior of Uncoated and Coated Tools under Complex Loading Conditions

Author(s): M. Wieland | M. Merklein
Volume: 34
Issue: 1
Year: 2012