Effect of Temperature and Electric Field on the Damping and Stiffness Characteristics of ER Fluid Short Squeeze Film Dampers
Author(s): H. P. Jagadish | L. Ravikumar
Volume: 2013
Year: 2013



Journal Bearings Lubrication Aspect Analysis Using Non-Newtonian Fluids
Author(s): Abdessamed Nessil | Salah Larbi | Hacene Belhaneche | Maamar Malki
Volume: 2013
Year: 2013



A Description of Multiscale Modeling for the Head-Disk Interface Focusing on Bottom-Level Lubricant and Carbon Overcoat Models
Author(s): Myung S. Jhon | Pil Seung Chung | Robert L. Smith | Lorenz T. Biegler
Volume: 2013
Year: 2013



Surface Layer States of Worn Uncoated and TiN-Coated WC/Co-Cemented Carbide Cutting Tools after Dry Plain Turning of Carbon Steel
Author(s): Johannes Kümmel | Katja Poser | Frederik Zanger | Jürgen Michna | Volker Schulze
Volume: 2013
Year: 2013



MOORA-Based Tribological Studies on Red Mud Reinforced Aluminum Metal Matrix Composites
Author(s): S. Rajesh | S. Rajakarunakaran | R. Suthakarapandian | P. Pitchipoo
Volume: 2013
Year: 2013



A Clue to Understand Environmental Influence on Friction and Wear of Diamond-Like Nanocomposite Thin Film
Author(s): Sukhendu Jana | Sayan Das | Utpal Gangopadhyay | Anup Mondal | Prajit Ghosh
Volume: 2013
Year: 2013



Lubrication Regimes in High-Performance Polymer Spur Gears
Author(s): K. D. Dearn | T. J. Hoskins | L. Andrei | D. Walton
Volume: 2013
Year: 2013



Optimum Groove Location of Hydrodynamic Journal Bearing Using Genetic Algorithm
Author(s): Lintu Roy | S. K. Kakoty
Volume: 2013
Year: 2013



Experimental Determination of Cutting Power for Turning and Material Removal Rate for Drilling of AA 6061-T6 Using Vegetable Oils as Cutting Fluid
Author(s): Y. M. Shashidhara | S. R. Jayaram
Volume: 2013
Year: 2013



Dry Sliding Friction and Wear Studies of Fly Ash Reinforced AA-6351 Metal Matrix Composites
Author(s): M. Uthayakumar | S. Thirumalai Kumaran | S. Aravindan
Volume: 2013
Year: 2013



Atomistic Frictional Properties of the C(100)2x1-H Surface
Author(s): Paul M. Jones | Huan Tang | Yiao-Tee Hsia | Xiaoping Yan | James D. Kiely | Junwei Huang | Christopher Platt | Xiaoding Ma | Michael Stirniman | Lang Dinh
Volume: 2013
Year: 2013



Frictional Effects on Gear Tooth Contact Analysis
Author(s): Zheng Li | Ken Mao
Volume: 2013
Year: 2013



Tribology of the Head-Disk Interface
Author(s): Bruno Marchon | Norio Tagawa | Bo Liu | Tom Karis | Jia-Yang Juang
Volume: 2013
Year: 2013



Contact Thermal Analysis and Wear Simulation of a Brake Block
Author(s): Nándor Békési | Károly Váradi
Volume: 2013
Year: 2013



Study of Tool Wear and Overcut in EDM Process with Rotary Tool and Magnetic Field
Author(s): Reza Teimouri | Hamid Baseri
Volume: 2012
Year: 2012



Non-Newtonian Effects on the Squeeze Film Characteristics between a Sphere and a Flat Plate: Rabinowitsch Model
Author(s): Udaya P. Singh | Ram S. Gupta
Volume: 2012
Year: 2012



Some Experimental and Simulation Results on the Dynamic Behaviour of Spur and Helical Geared Transmissions with Journal Bearings
Author(s): R. Fargère | P. Velex
Volume: 2012
Year: 2012



Tribochemistry of Ionic Liquid Lubricant on Magnetic Media
Author(s): Hirofumi Kondo
Volume: 2012
Year: 2012



Nanorheometry of Molecularly Thin Liquid Lubricant Films Coated on Magnetic Disks
Author(s): Shintaro Itoh | Yuya Hamamoto | Koki Ishii | Kenji Fukuzawa | Hedong Zhang
Volume: 2012
Year: 2012



Mixed and Fluid Film Lubrication Characteristics of Worn Journal Bearings
Author(s): Toshiharu Kazama | Yukihito Narita
Volume: 2012
Year: 2012



Effect of Strain Hardening on Elastic-Plastic Contact of a Deformable Sphere against a Rigid Flat under Full Stick Contact Condition
Author(s): Biplab Chatterjee | Prasanta Sahoo
Volume: 2012
Year: 2012



A Two-Scale Approach for Lubricated Soft-Contact Modeling: An Application to Lip-Seal Geometry
Author(s): Michele Scaraggi | Giuseppe Carbone
Volume: 2012
Year: 2012



Surface Layer Properties after Successive EDM or EDA and Then Superficial Roto-Peen Machining
Author(s): Agnieszka Dmowska | Bogdan Nowicki | Anna Podolak-Lejtas
Volume: 2012
Year: 2012



Influence of Micropolar Lubrication on the Performance of 4-Pocket Capillary Compensated Conical Hybrid Journal Bearing
Author(s): Satish C. Sharma | Arvind K. Rajput
Volume: 2012
Year: 2012



Effect of Surface Roughness on MHD Couple Stress Squeeze-Film Characteristics between a Sphere and a Porous Plane Surface
Author(s): M. Rajashekar | Biradar Kashinath
Volume: 2012
Year: 2012



Tribological Properties of Metal V-Belt Type CVT Lubricant
Author(s): Keiichi Narita
Volume: 2012
Year: 2012



Formation of Composite Surface during Friction Surfacing of Steel with Aluminium
Author(s): S. Janakiraman | K. Udaya Bhat
Volume: 2012
Year: 2012



Dependence of Pin Surface Roughness for Friction Forces of Ultrathin Perfluoropolyether Lubricant Film on Magnetic Disks by Pin-on-Disk Test
Author(s): H. Tani | Y. Mitsuya | T. Kitagawa | N. Tagawa
Volume: 2012
Year: 2012



FE Prediction of Hysteretic Component of Rubber Friction
Author(s): L. Pálfi | T. Goda | K. Váradi | E. Garbayo | J. M. Bielsa | M. A. Jiménez
Volume: 2012
Year: 2012



Parametric Investigations at the Head-Disk Interface of Thermal Fly-Height Control Sliders in Contact
Author(s): Sripathi V. Canchi | David B. Bogy | Run-Han Wang | Aravind N. Murthy
Volume: 2012
Year: 2012



Structure and Abrasive Wear of Composite HSS M2/WC Coating
Author(s): S. F. Gnyusov | V. G. Durakov | S. Yu. Tarasov
Volume: 2012
Year: 2012



Flying Instability due to Organic Compounds in Hard Disk Drive
Author(s): Koji Sonoda
Volume: 2012
Year: 2012



Novel Chromatic Technique Based on Optical Absorbance in Characterizing Mineral Hydraulic Oil Degradation
Author(s): C. V. Ossia | H. Kong
Volume: 2012
Year: 2012



Correlation between Wear Resistance and Lifetime of Electrical Contacts
Author(s): Jian Song | Christian Koch | Liangliang Wang
Volume: 2012
Year: 2012



Dynamic Performance Characteristics of a Curved Slider Bearing Operating with Ferrofluids
Author(s): Udaya P. Singh | R. S. Gupta
Volume: 2012
Year: 2012



Magnetic Fluid-Based Squeeze Film Behaviour in Curved Porous-Rotating Rough Annular Plates and Elastic Deformation Effect
Author(s): M. E. Shimpi | G. M. Deheri
Volume: 2012
Year: 2012



Tribological Studies on AISI 1040 with Raw and Modified Versions of Pongam and Jatropha Vegetable Oils as Lubricants
Author(s): Y. M. Shashidhara | S. R. Jayaram
Volume: 2012
Year: 2012



CFD Simulations of Splash Losses of a Gearbox
Author(s): Carlo Gorla | Franco Concli | Karsten Stahl | Bernd-Robert Höhn | Michaelis Klaus | Hansjörg Schultheiß | Johann-Paul Stemplinger
Volume: 2012
Year: 2012



Optimization of Dry Sliding Wear Performance of Ceramic Whisker Filled Epoxy Composites Using Taguchi Approach
Author(s): M. Sudheer | Ravikantha Prabhu | K. Raju | Thirumaleshwara Bhat
Volume: 2012
Year: 2012



Mechanical and Tribological Properties of PVD-Coated Cemented Carbide as Evaluated by a New Multipass Scratch-Testing Method
Author(s): M. Fallqvist | R. M'Saoubi | J. M. Andersson | M. Olsson
Volume: 2012
Year: 2012



Surface Chemistry of Aluminium Alloy Slid against Steel Lubricated by Organic Friction Modifier in Hydrocarbon Oil
Author(s): Ichiro Minami | Ayumi Sugibuchi
Volume: 2012
Year: 2012



Investigations on Oil Flow Rates Projected on the Casing Walls by Splashed Lubricated Gears
Author(s): G. Leprince | C. Changenet | F. Ville | P. Velex
Volume: 2012
Year: 2012



Improved Pressure Distribution in Elliptic Elastic Contacts between High-Order Surfaces
Author(s): Marilena Glovnea | Sergiu Spinu | Emanuel Diaconescu
Volume: 2012
Year: 2012



Low Molecular Weight Z-Tetraol Boundary Lubricant Films in Hard Disk Drives
Author(s): R. J. Waltman | H. Deng
Volume: 2012
Year: 2012



Slider Posture Effects on Air Bearing in a Heat-Assisted Magnetic Recording System
Author(s): Kyaw Sett Myo | Weidong Zhou | Xiaoyang Huang | Shengkai Yu | Wei Hua
Volume: 2012
Year: 2012



Development of New PM Iron-Based Materials for Self-Lubricating Bearings
Author(s): Cristina Teisanu | Stefan Gheorghe
Volume: 2011
Year: 2011



Wear Behavior and Its Correlation with Mechanical Properties of TiB2 Reinforced Aluminium-Based Composites
Author(s): N. B. Dhokey | K. K. Rane
Volume: 2011
Year: 2011



Combustion Synthesis of TiC-TiB2-Based Cermets from Elemental Powders
Author(s): Jun Yu | Kiyotaka Matsuura | Munekazu Ohno
Volume: 2011
Year: 2011



A Characterization Method for Al Recovery from Dross Based on Compression at Elevated Temperatures
Author(s): S. Maropoulos | D. Kountouras | X. Voulgaraki | S. Papanikolaou | I. Sanaidis
Volume: 2011
Year: 2011



Characterization of Tool Wear in High-Speed Milling of Hardened Powder Metallurgical Steels
Author(s): Fritz Klocke | Kristian Arntz | Gustavo Francisco Cabral | Martin Stolorz | Marc Busch
Volume: 2011
Year: 2011


